• Structural Engineering and Mechanics
• /
• 제63권1호
• /
• pp.1-9
• /
• 2017

Shot peening is a cold surface treatment employed to induce residual stress field in a metallic component beneficial for increasing its fatigue strength. The experimental investigation of parameters involved in shot peening process is very complex as well as costly. The most attractive alternative is the explicit dynamics finite element (FE) analysis capable of determining the shot peening process parameters subject to the selection of a proper material's constitutive model and numerical technique. In this study, Ansys / LS-Dyna software was used to simulate the impact of steel shots of various sizes on an aluminium alloy plate described with strain rate dependent elasto-plastic material model. The impacts were carried out at various incident velocities. The influence of shot velocity and size on the plastic deformation, compressive residual stress and force-time response were investigated. The results exhibited that increasing the shot velocity and size resulted in an increase in plastic deformation of the aluminium target. However, a little effect of the shot velocity and size was observed on the magnitude of target's subsurface compressive residual stress. The obtained results were close to the published ones, and the numerical models demonstrated the capability of the method to capture the pattern of residual stress and plastic deformation observed experimentally in aluminium alloys. The study can be quite helpful in determining and selecting the optimal shot peening parameters to achieve specific level of plastic deformation and compressive residual stress in the aluminium alloy parts especially compressor blades.

• 한국약용작물학회지
• /
• 제2권2호
• /
• pp.146-148
• /
• 1994

강원도(江原道) 지방(地方)에서 일반(一般) 관행법(慣行法)으로 재배(栽培)할 때 5월(月)제(第)1본엽(本葉) 출현후(出現後)부터 5월(月) 하순(下旬) 제(第)3본엽(本葉) 출현시(出現始)까지 경단조직(莖端助織)의 화아분화(花芽分化) 상태(狀態)를 관찰(觀察)한 바 참당귀의 화아분화(花芽分化)는 제(第)2본엽(本葉)이 출현한 5월(月) 중순경(中旬頃)으로 관찰되었으나 묘소질의 차이에 의한 개체별 분화기변리(分化期變異)가 심(甚)하였다. 따라서 재배관리상(栽培管理上) 추대(抽臺)를 억제(抑制) 또는 감소(減少)시킬 목적(目的)으로 억제(抑制) 물질(物質) 처리(處理), 일장(日長)이나 광도조절(光度調節) 등의 인위적(人爲的) 조치(措置)는 이 시기를 고려함이 바람직 할 것으로 사료(思料)된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.121-124
• /
• 2008

FRP를 적용하는 대표적인 보강공법으로는 외부부착공법으로서, FRP Plate 또는 fiber sheet를 사용하여 노후화된 보강면에 FRP 보강재를 부착하는 형식이다. 하지만, 이러한 외부부착공법은 FRP보강재의 인장특성을 충분히 발휘하지 못하는 단점이 있다. 따라서 외부부착공법의 단점을 보완하기 위해 표면매립공법, 즉, Near Surface Mounted(이하 NSM)공법이 제안되었다. 이는 FRP 보강재를 매립함으로써 부재와 보강재의 부착 성능을 증가시킴에 따라 효율적인 응력전달 및 조기 debonding을 사전에 방지할 수 있으며, 이로 인해 FRP 보강재의 인장특성이 효율적으로 발휘될 수 있다. 효율적인 NSM 보강을 위해서는, 구조물에 가해지는 하중, 구성재료, 구조물의 기하학적 형상 등이 갖는 불확실 특성을 반영하여, 보강 후 구조물의 신뢰도를 기준으로 한 보강성능 평가가 필요하다. 본 연구에서는 노후화된 철도교 실교량 모델을 선정하여 외부하중, 재료 및 기하학적 형상의 불확실성을 Monte Carlo Simulation확률기법을 적용하여 그 분포특성을 분석한 후, NSM 보강에 대한한계상태 함수를 통해 목표신뢰도에 부합할 수 있는 휨보강비를 도출하고자 하였다. 해석결과 LS-25하중을 상회하는 내하력 증진효과를 확률분포로써 확인할 수 있었다. 따라서 확률신뢰성기법을 적용한 보강설계의 유효성을 확인할 수 있었으며, 추후 다양한 보강공법으로의 적용이 가능할 것으로 판단된다.

• 한국해양공학회지
• /
• 제28권2호
• /
• pp.126-132
• /
• 2014

In this study, a method for analyzing the collision and interaction between ice bergy bits and a Mark III type liquid natural gas (LNG) carrier was considered, and the structural safety of a ship's hull and cargo containment system (CCS) was evaluated. In the analysis, a constitutive model implementing the strain rate dependant mechanical property was used to consider the typical material characteristics of ice rationally. A relatively simple and easy ice structure interaction analysis procedure, compared with the accurate but complicated FSI analysis scheme, was suggested. When the ice bergy bits collided with ship's side hull under the four assumed scenarios, the structural behaviors of the ship structure and LNG CCS were simulated by applying the suggested ice collision analysis procedure using the commercial hydro-code LS-DYNA. In addition, the effects of the shapes and colliding speed of the ice bergy bits on the ice-structure interaction and safety of the CCS were examined in detail.

• 한국환경과학회지
• /
• 제19권3호
• /
• pp.379-387
• /
• 2010

Sediments of Little Scioto (LS) River in Ohio was contaminated by poor disposal of creosote from Baker Wood Creosoting Facility. Among the primary compounds of creosote, Polycyclic Aromatic Hydrocarbons (PAHs) are the most common ingredient PAHs are known for toxic, carcinogenic and mutagenic compounds. There are many difficulties to remove the PAHs in nature environment because their characteristics are having a less water-solubility, volatile and low mobility properties as increasing the molecular weight. The generation of hydroxyl radicals (${\cdot}OH$) and hydrogen peroxide ($H_2O_2$) forms as well as high temperature (5000 K) and pressure (1000 atm) by a physico-chemical effects of ultrasound during a cavitation collapse can promote the degradation and desorption of PAHs in sediment And it can also produces shock wave and microjets which are able to change the size and surface of particle in solid-liquid system as one of physical effects. Therefore, we explored to understand the role of particle size, the effect of elimination for PAHs concentration by ultrasound and optimize the conditions for ultrasonic treatment. The condition of various size of particles (> $150{\mu}m$, < $150{\mu}m$) and solid-liquid ratio (12.5g/L, 25g/L) for the treatment was considered and ultrasonic power (430 W/L) with liquid - hexane extraction and microwave extraction method were applied after ultrasound treatment.

• Journal of Biosystems Engineering
• /
• 제40권1호
• /
• pp.19-27
• /
• 2015

Purpose: A system to measure the visibility of agricultural tractor operators was designed and evaluated according to ISO standards, and a blind area diagram around the tested tractor was created based on the manual method recommended by the National Institute for Occupational Safety and Health (NIOSH). Methods: A visibility measurement system was designed and evaluated based on the ISO 5006 and ISO 5721-1 standards. Two bulbs used to simulate the operator's eyes were mounted on a bar with a supporting frame. A wooden frame was used to determine the seat index point position. The 12-m visibility test circle was divided into six sectors of vision, and the test tractor was placed at the center of the circle. Artificial light was supplied in the darkened environment, and shadow or masking effects were measured manually around the 12-m circle. Results: When the bulbs were placed at the operator's eye level, front visibility was good; no masking was found in the "A" vision sector, but larger masking widths were found in the "B" and "C" vision sectors. Since the masking width exceeded 700 mm, additional tests, such as movement of the light sources to both sides of the operator's eye level, were performed. Less than six masking effects were found in the semi-circle of vision to the front, and more than one masking was found in the "B" and "C" visual fields. The minimum distance between the centers of two masking effects exceeded 2500 mm when measured as a chord on the semi-circle of vision. A blind area diagram was created to define the exact nature of the blind spots and mirror visibility. Conclusions: Visibility evaluation is an effective way to enable proper and safe operation for agricultural tractor operators. Inclusion of this visibility evaluation test in the general testing process might aid tractor manufacturers.

• Journal of Biosystems Engineering
• /
• 제40권1호
• /
• pp.28-34
• /
• 2015

Purpose: This study aimed to install an RTK-GPS (Real Time Kinematic-Global Positioning System) and IMU (Inertial Measurement Unit) on a tractor used in a farm to measure positions, pasture topography, posture angles, and vibration accelerations, translate the information into maps using the GIS, analyze the characteristics of grass harvesting work, and establish new technologies and construction standards for pasture infrastructure improvement based on the analyzed data. Method: Tractor's roll, pitch, and yaw angles and vibration accelerations along the three axes during grass harvesting were measured and a GIS map prepared from the data. A VRS/RTK-GPS (MS750, Trimble, USA) tractor position measuring system and an IMU (JCS-7401A, JAE, JAPAN) tractor vibration acceleration measuring systems were mounted on top of a tractor and below the operator's seat to obtain acceleration in the direction of progression, transverse acceleration, and vertical acceleration at 10Hz. In addition, information on regions with bad workability was obtained from an operator performing grass harvesting and compared with information on changes in tractor posture angles and vibration acceleration. Results: Roll and pitch angles based on the y-axis, the direction of forward movements of tractor coordinate systems, changed by at least $9-13^{\circ}$ and $8-11^{\circ}$ respectively, leading to changes in working postures in the central and northern parts of the pasture that were designated as regions with bad workability during grass harvesting. These changes were larger than those in other regions. The synthesized vectors of the vibration accelerations along the y-axis, the x-axis (transverse direction), and the z-axis (vertical direction) were higher in the central and northwestern parts of the pasture at 3.0-4.5 m/s2 compared with other regions. Conclusions: The GIS map developed using information on posture angles and vibration accelerations by position in the pasture is considered sufficiently utilizable as data for selection of construction locations for pasture infrastructure improvement.

• 한국자기학회지
• /
• 제20권2호
• /
• pp.45-51
• /
• 2010

비파괴검사는 탐지물체에 물리적 손상을 가하지 않고 내부 정보를 파악할 수 있어 다양한 분야에서 이용되고 있다. 그 중 전자기를 이용한 물체의 형상추정방법의 경우 역 유한요소법을 이용하여야 하지만 이는 비선형성이 강하고 수치계산이 복잡하고 측정 센서의 개수가 미지수의 개수보다 훨씬 적어 정확한 결과를 얻는데 어려움이 있다. 본 논문에서는 탐지물체에 의한 자기장 변화 신호만을 이용하여, 물체의 시스템 내 각 센서별 위치에서 물체와 등가면적의 원의 비교를 통해 비교적 간편하게 자성물체의 부피를 판정하고 형상추정을 위한 다양한 보정과정을 거쳐 탐지물체의 형상판정이 가능한 알고리즘을 제안하고 검증하였다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제31권3호
• /
• pp.274-278
• /
• 2005

Purpose : Prediction for soft tissue change after orthognathic surgery is very important for the final esthetics. In this study, we have tried to get the amount of upper lip movement relative to bony segment movement after anterior segmental osteotomy by cephalmetric analysis to predict final upper lip position after surgery. Material and Methods : 20 patients was studied on whom anterior segmental osteotmy as performed by Cupar method during the years 2002 to 2003. Cephalometric radiograph were taken at 1month before surgery and 6 month after surgery. Change of upper lip was measured on landmark Ls and Sto relative to hard tissue (landmark Ia) setback on these X-rays and analyzed. Results : 1. Upper lip setback movement. Setback of upper lip showed proportional relation to the hard tissue setback and the ratio was about 84%(p=0.001). 2. Upper lip downward movement. Downward movement of upper lip showed no proportional relation to hard tissue setback And the amount was mean 1.38 mm and SD 1.21mm (p=0.922). Conclusion : The posterior movement of upper lip is affected by hard tissue movement and shows good proportional change whereas downward movement is not so much influenced by hard tissue movement. And we think slight downward movement shown in this study could be explained by the V-Y closure performed during surgery.

• 환경영향평가
• /
• 제20권3호
• /
• pp.313-324
• /
• 2011

The purpose of this study is to present the raw data for establishing the plan of top soil conservation in soil environment and preventing the soil loss by establishing the potential amount of soil loss using RUSLE. The results are as follows. To apply the RUSLE model, we calculated the potential amount of soil loss by using 5 factors; rainfall erosion factor(R), topographical factor(LS), soil erosion factor(K), land cover factor(C) and erosion control factor(P). The assessment map of soil loss was drawn up by classifying 5 grades. According to the soil loss estimation by the RUSLE, it showed that approximately 83.9% of the study area had relatively lower possibility of soil loss which was the 1 ton/ha in annual soil loss. Whereas, the 7.0% of the study area was defined as high risk area which was the 10 ton/ha in annual. Therefore, this area was needed that there was environment-friendly construction of farm land, improvement of cultivation environment and so forth. In future, if we will analyze the amount of soil loss of Gyeongju national park and Hyeongsan river watershed, we will offer the help to establishing the conservation plan of soil environment in Gyeongsangbuk-do.