• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.577-580
• /
• 1996

LQ-servo is a stability-robustness guaranteed multivariable controller design method based on the LQR structure to improve command following performance with output feedback. In this paper, a new type of PI controller based on LQ-servo is introduced. Then, Command following performance is improved using the limiting behavior of the control gain and weighting factors on the low frequency part of design parameter Q that is the state weighting matrix in the cost function.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.3B
• /
• pp.570-576
• /
• 2000

This paper proposed LQ-Servo PI controller by considering LQ-Servo structure as PI controller with a partial state feedback and concerns about the development of the flexible design algorithm by introducing weights to the design parameters of the previous LQ-Servo design method. the propose algorithm improves the matchings of the maximum and minimum singular values at high and low frequencies of the design loop transfer function as well as its loop shaping for performance.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.79-81
• /
• 2004

LQ-Servo controller inherits the stability-robustness from rational LQR structure and also, satisfies performance-robustness that is lacking in LQR structure by importing partial output feedback. In this paper, LQ-Servo controller is suggested for strengthening the performance-robustness. For this, Several executings are effectively performed by implementing to the rotational inverted pendulum system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.11
• /
• pp.1594-1601
• /
• 2014

In this paper, we propose the LQ servo control method for the automatic train control of urban rail vehicle. Structures of the conventional PID control and LQ servo controller are compared in order to demonstrate the simplicity of the proposed controller which doesn't have zeros of the closed loop systems. The energy consumption is dealt with as an object function to be minimized, which consists of the quadratic performance indices for optimal control with the input of the feedback linearization. The effectiveness of the proposed method is shown by the practical example, compared with the conventional PD controller.

• Journal of Power Electronics
• /
• v.4 no.4
• /
• pp.228-236
• /
• 2004

This paper describes the optimal current-control of a permanent magnet synchronous motor by the use of robust and simple current controllers, based upon the analytical procedure known as the inverse LQ (ILQ) design method. The ILQ design method is a strategy for finding the optimal gains based on pole assignment without solving the Riccati equation. It is very important to keep the motor in robust servo-lock. By experiments and simulations, we will show that the ILQ optimal servo-system with servo-lock is more insensitive at low speeds to variations in armature inductance than the standard PI servo-system. Variations in armature inductance have the greatest influence on the responses of a servo-system.

• Journal of the Korea Computer Industry Society
• /
• v.7 no.3
• /
• pp.155-162
• /
• 2006

Because of their lower cost, higher speed, and longer travel, a belt drive system are quite desirable over screw driven system. However, a belt drive system are inherently difficult to control due to belt flexibility, friction, vibration, backlash and other non-linearities. This thesis presents servo control algorithm and the designing method of controller appliable to a belt drive system. In this paper, a LQ servo controller for a belt drive system is proposed to accomplish an optimal design of improved control system. In this scheme a mathematical model for the control system is obtained in state space form. Finally, the effectiveness of the proposed servo controller was verified through the computer simulation results.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.3
• /
• pp.9-16
• /
• 1996

LQ-servo is a robustness guaranteed multivariable controller design method based on the LQR structure to improve command following with output feedback. in this paper we introduce a weighting factor on the low frequency part of the state weighting matrix in the performance index in order to increase the low frequency gain of loop transfer function matrix T(s) in the loop shaping design method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.5
• /
• pp.443-449
• /
• 1997

LQ-servo design procedure introduced by Athans is a method using a partial states feedback and an output feedback in order to improve the poor performance robustness of the LQR as well as to maintain its stability robustness. Although the method guarantees good stability robustness, it is not effective in performance robustness as it does not match the singular value at low or high frequencies of the transfer matrix obtained by breaking at the plant output. This paper intends propose of a new method, using the limited behaviour of the control gain introduced by Kwakernaak and Sivan, in order to improve it does it refer to controlga introduced by kwakernaak or the new metho Anblguouls.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.2
• /
• pp.944-949
• /
• 2017

Recently, the demand of maglev systems in the manufacturing industry for LCD and OLED display panels, which are required to be very clean and possess vacuum systems, has been increasing due to their characteristics such as being non-contact, noise free and eco-friendly. However, it is still a challenge to simultaneously control both the propulsion and levitation for their interactive effect difficult to be exactly measured. In this paper, we proposed a new tuning method for controlling the magnetic levitation force robustly against the levitation disturbance caused by a propulsion system, based on LQ servo optimal control. The disturbance torque of the LSM propulsion system is calculated through FEM analysis in such a way that the LQ servo controller is determined in order to minimize the effect of the disturbance. The robust performance of the proposed LQ servo control method for the in-track type magnetic levitation systems is demonstrated via simulations and experiments.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.55-58
• /
• 2003

A LQ-servo PI controller is proposed to deal with the uncertainty caused variations of load inertia of direct drive do motor by using loop shaping technique.