• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.151-152
• /
• 2006

Multi-hop system has advantage of low power consumption, improved cell capacity, and enlarged service coverage. Most of previous researches show that multi-hop relaying beyond dual-hop relaying does not improve system performance significantly. This leads most researches are focused on dual-hop relaying system. In this paper, we propose an optimal boundary condition to support maximal data rate for fluctuation of traffic load in single cell dual-hop relay system.

• Journal of Power Electronics
• /
• v.1 no.2
• /
• pp.133-144
• /
• 2001

Power electronics plays an important role in providing an interface between fuel cells and loads. Furthermore, power electronic converters ensure that the power is reliably and efficiently delivered to the load in the required DC or AC form. In this paper, major types of fuel cells are presented. Basic structures, operating principles, and different applications of fuel cells are described. In addition, current status and future trends in the areas of power electronics for fuel cells are described. In addition, current statue and future trends in the areas of power electronics for fuel cell applications are explained. A review of fuel cell power electronic system topologies and basic requirements are given as well.

• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.3
• /
• pp.264-269
• /
• 2016

A simple dry chemical approach was developed in order to load palladium (Pd) as a promoter on Pt/gas diffusion electrode (GDE) for polymer electrolyte membrane fuel cell (PEMFC). Palladium(II) bis (acetylacetonate), $Pd(acac)_2$ was sublimed, penetrated into Pt/GDE and then reduced to Pd nanoparticles simultaneously without any reducing agent and any solvent in a glass reactor of $N_2$ atmosphere at $180^{\circ}C$ for 3, 5 and 15 min. Pd distribution was analyzed by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS), and I-V curve was estimated by using a unit cell with $5{\times}5cm^2$ active area.

• Journal of electromagnetic engineering and science
• /
• v.15 no.1
• /
• pp.14-19
• /
• 2015

In multicellular wireless networks, intercell interference limits system performance, especially cell edge user performance. One promising approach to solve this problem is the intercell interference coordination (ICIC) scheme. In this paper, we propose a new ICIC scheme based on a resource partitioning approach to enhance cell edge user performance in a wireless multicellular system. The most important feature of the proposed scheme is that the algorithm is performed at each base station in a distributed manner and therefore minimizes the required information exchange between neighboring base stations. The proposed scheme has benefits in a practical environment where the traffic load distribution is not uniform among base stations and the backhaul capacity between the base stations is limited.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.355-358
• /
• 2005

This paper describes an simulation method to utilize the hybrid system with fuel cell and battery. The hybrid system has unique advantage to manage energy state between high energy system (fuel cell) and high power system (battery) according to various type of load. For proper design, the hybrid system is modelled and simulated. Especially, battery SOC is used as an important control parameter to decide the energy control.

• Proceedings of the KIPE Conference
• /
• 2008.10a
• /
• pp.100-102
• /
• 2008

As Utility interactive fuel cell systems are widely used, it is required for each power conditioning system(PCS) to have higher generating performance and more stable connecting characteristics. This study is focused to minimization of power losses and hence higher efficiency related to the new half bridge type 3-stage utility interactive PCS topology. The loss factor of half-bridge converter becomes only 1.2[%] under the rated load, and hence total efficiency is maintained to be higher as 91[%].

• Transactions of the Korean hydrogen and new energy society
• /
• v.32 no.6
• /
• pp.497-505
• /
• 2021

Water management is essential to improve the performance of proton exchange membrane fuel cells. This study targets to understand the characteristics of water concentration in proton exchange membrane fuel cells at a dynamic load variable environment. The fuel cell model was developed to simulate nonlinear water transport in membrane by the MATLAB/Simulink^® (MathWorks, Natick, MA, USA) platform, and it calculates water content in membrane, ionic conductivity, and predicts fuel cell performance through one-dimensional analysis.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.76.2-76.2
• /
• 2010

The gas diffusion layer is the key component of the proton exchange membrane fuel cell because it directly affect to the mass transport mechanism and dynamic behavior of the cell. In this study, the effects of GDL aging on the transient response of the PEM fuel cell is systematically investigated using current step transient response analysis under different stoichiometric ratios and humidity conditions. With GDLs aged by the accelerated stress test, the effects of hydrophobicity and structural changes due to carbon loss in the GDL on the transient response of PEM fuel cells are determined. The degraded GDLs that had uneven hydrophobicity distributions cause local water flooding inside the GDL and induce lower and unstable voltage responses after load changes.

• Biomaterials and Biomechanics in Bioengineering
• /
• v.1 no.1
• /
• pp.1-12
• /
• 2014

Polymer multilayered hydrogels were prepared on a titanium alloy (Ti) substrate using a layer-by-layer (LBL) process to load a cell growth factor. Two water-soluble polymers were used to fabricate the multilayered hydrogels, a phospholipid polymer with both N, N-dimethylaminoethyl methacrylate (DMAEMA) units and 4-vinylphenylboronic acid (VPBA) units [poly(MPC-co-DMAEMA-co-VPBA) (PMDV)], and the polysaccharide alginate (ALG). PMDV interacted with ALG through a selective reaction between the VPBA units in PMDV and the hydroxyl groups in ALG and through electrostatic interactions between the DMAEMA units in PMDA and the anionic carboxyl groups in ALG. First, the Ti substrate was covered with photoreactive poly vinyl alcohol, and then the Ti alloy was alternately immersed in the respective polymer solutions to form the PMDV/ALG multilayered hydrogels. In this multilayered hydrogel, vascular endothelial growth factor (VEGF) was introduced in different layers during the LbL process under mild conditions. Release of VEGF from the multilayered hydrogels was dependent on the location; however, release continued for 2 weeks. Endothelial cells adhered to the hydrogel and proliferated, and these corresponded to the VEGF release profile from the hydrogel. We concluded that multilayered hydrogels composed of PMDV and ALG could be loaded with cell growth factors that have high activity and can control cell functions. Therefore, this system provides a cell function controllable substrate based on the controlled release of biologically active proteins.

• Korean Management Science Review
• /
• v.16 no.1
• /
• pp.39-50
• /
• 1999

This paper proposes a new call admission control method to enhance the reverse link capacity of a cell with heavy traffic in the CDMA PCS system under the uneven traffic load between cells. Since the capacity of a cell in the CDMA system is restricted by the total interference caused by terminals in the own cell and the adjacent cells, we can enhance the capacity of a cell by reducing the interference from other cells if possible. Our power control method allows that the signal powers received in base stations with heavy traffic be larger than those received in base stations with light traffic in order to make the interference due to other cells in the cells with heavy traffic relatively small. In the previous study, it was assumed that the signal power received by each base station in the CDMA PCS system is same when the call admission control algorithm is implemented. We could show that the reverse link capacity of a cell in the CDMA PCS system can be increased about 20% under our call admission control method.