• Korean Chemical Engineering Research
• /
• v.59 no.2
• /
• pp.200-208
• /
• 2021

Compare to the gaseous hydrogen, liquid hydrogen has various advantages: easy to transport, high energy density, and low risk of explosion. However, the hydrogen liquefaction process is highly energy intensive because it requires lots of energy for refrigeration. On the other hand, the cold energy of the liquefied natural gas (LNG) is wasted during the regasification. It means there are opportunities to improve the energy efficiency of the hydrogen liquefaction process by recovering wasted LNG cold energy. In addition, hydrogen production by natural gas reforming is one of the most economical ways, thus LNG can be used as a raw material for hydrogen production. In this study, a novel hydrogen production and liquefaction process is proposed by using LNG as a raw material as well as a cold source. To develop this process, the hydrogen liquefaction process using hydrocarbon mixed refrigerant and the helium-neon refrigerant is selected as a base case design. The proposed design is developed by applying LNG as a cold source for the hydrogen precooling. The performance of the proposed process is analyzed in terms of energy consumption and exergy efficiency, and it is compared with the base case design. As the result, the proposed design shows 17.9% of energy reduction and 11.2% of exergy efficiency improvement compare to the base case design.

• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.4
• /
• pp.262-270
• /
• 2021

Consumption of Liquefied Natural Gas (LNG) has increased due to environmental pollution; therefore, the need for LNG carriers can efficiently transport large quantities of LNG, is increased. In various types of LNG Cargo Containment System (CCS), Membrane-type MARK-III composed of composite materials is generally employed in the construction of an LNG carrier. Among composite materials in a Mark-III system, glass-fiber composites act as a secondary barrier to prevent the inner hull structure from leakage of LNG when the primary barrier is damaged. Nevertheless, several cases of damage to the secondary barriers have been reported and if damage occurs, LNG can flow into the inner hull structure, causing a brittle fracture. To prevent those problems, this study conducted the applicability assessment of composite material manufactured by bonding glass-fiber and aluminum with epoxy resin and increasing layer from three-ply (triplex) to five-ply (pentaplex). Tensile tests were performed in five temperature points (25, -20, -70, -120, and -170℃) considering temperature gradient in CCS. Scanning Electron Microscopy (SEM) and Coefficient of Thermal Expansion (CTE) analyses were carried out to evaluate the microstructure and thermos-mechanical properties of the pentaplex. The results showed epoxy resin and increasing layer number contributed to improving the mechanical properties over the whole temperature range.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.363-366
• /
• 2006

Various kinds of ships(Cargo ship, Passenger ship, Training ship, Special ship etc.) are operated to transport cargo or passengers at sea in the world. Most of the important auxiliary machinery which is installed are fluid machinery in those ships. A large percentage of fluid machinery is pumps which are classified turbo and non-turbo type. While much previous research has focused on pumps for shore use, very little is known about ship's pump. In order to develop an understanding of ship's pump, we introduce common pumps used in every ship and special pumps based on ship's type. This exploratory study lays the groundwork for further investigation of ship's pumps

• Journal of Welding and Joining
• /
• v.12 no.1
• /
• pp.102-115
• /
• 1994

This paper is to evaluate the fatigue strength of lap joints of materials applied to LNG carrier cargo containment of GAZ-TRANSPORT(GT) type, which was welded by manual and automatic TIG welding process. The thicknesses of lapped members were 1.5mm/1.5mm or 1.5mm/0.7mm in Invar to Invar joint, and 1.5mm/8.0mm in Invar to stainless steel joint, respectively. These lap joints were mainly applied to the membrance fabrication of GT-LNG carrier. Fatigue tests of Invar/Inar lap joints were conducted under the stress ratio R=0 at room temperature. The effect of mean stress and cumulative fatigue damage on the allowable stress of Invar lap joint was evaluated on the basis of test results. Fatigue test was also conducted on Inver/Stainless steel lap joints welded by automatic TIG process without filler metals. The fatigue test of the joint was carried out under the same conditions as those of Invar/invar lap joints. The fatigue strength of the joint welded without filler metal was comparable to those welded with filler metal quoted from reference. The fatigue strength of Invar/stainless steel lap joint was only dependent on the lap throat thickness, and not on the welding process. Based on test results, the applicability of TIG welding process without filler metal in Invar/stainless steel lap joint was reviewed by controlling welding variables to assure the valid throat thickness of lap joints.

• Journal of the Korean Institute of Gas
• /
• v.9 no.2 s.27
• /
• pp.1-7
• /
• 2005

The thermochemical parameters for safe handling, storage, transport, operation and process design of flammable substances are explosive limit, flash point, autoignition temperature, minimum oxygen concentration, heat of combustion etc.. Explosive limit and autoignition temperature are the major physical properties used to determine the fire and explosion hazards of the flammable substances. Explosive limit and autoignition temperature of methane fur LNG process safety were investigated. By using the literatures data, the lower and upper explosive limits of methane recommended 4.8 vol$\%$ and 16 vol$\%$, respectively. Also autoignition temperatures of methane with ignition sources recommended $540^{\circ}C$ at the electrically heated cruicible furnace (the whole surface heating) and recommended about $1000^{\circ}C$ in the local hot surface. The new equations for predicting the temperature dependence and the pressure dependence of the lower explosive limits for methane are proposed. The values calculated by the proposed equations were a good agreement with the literature data.

• Korea Trade Review
• /
• v.47 no.5
• /
• pp.289-304
• /
• 2022

Korea's LNG and crude oil are the most important energy and export raw materials, but 100% import resources by overseas. However, tanker shipping companies, which play the most crucial role in energy cargo security, are very small in number and size, which can be a factor in the supply chain crisis. Therefore, this paper studied the policy of expanding tanker transportation necessary for the transport of crude oil and LNG in Korea. In the existing literature, there was no policy study necessary for tanker ships, but referring only to the importance of overseas energy development and transportation, so we tried to derive various demands necessary for expanding the tanker fleet through expert interviews and AHP which was conducted on 89 related energy institutions to derive policies and their priorities. The results of the study are as follows. As for the policy, the financial support policy was the highest priority, followed by the business and the mutual cooperation policy of related agencies. Tax support (22.6%) and ship financing (19.4%) were the highest priorities, followed by the Energy Intermediate Promotion Act (11.9%), Tanker Guarantee Insurance (10.6%), Energy Budget Independence (9.3%), and Korea Trader Development (8.2%). Energy governance (6.3%), information center establishment (6.2%), and energy procurement committee (5.5%) ranked seventh, eighth, and ninth. The research results show that it is necessary to supply sufficient ships to the market through the expansion of ship finance for tankers and to follow business support policies such as guarantee insurance. In addition, it was also possible to derive that the financial resources need to be determined by law and independent budgets for consistency and continuity.

• Journal of Korea Port Economic Association
• /
• v.32 no.4
• /
• pp.109-126
• /
• 2016

This study investigates the initiatives of Gangwon sea routes based on precedent studies on the North Pole route to suggest a multi-modal buildup of transport logistics network of Gangwon harbors for the strengthening of logistics efficiency in the Korean Peninsula. The findings were: First, the government should expand railway infrastructure in Gangwon. Second, harbors in Gangwon should each have one speciality to strengthen connection with other harbors by using railway oriented background transportation network. Third, the government should develop industries of EFEZ(East coast Free Economic Zone) in the East Sea Coast in Gangwon to connect resources from the North Pole Sea. Fourth, the government should invite the base of Araon Ho's polar research vessel to play the role of the North Pole Sea route in the near future. Fifth, the government should strengthen the role of the Samcheock LNG base under construction. SIxth, environment-friendly transportation technology should be introduced to reduce carbon emission as much as possible. Lastly, an optimum North Pole logistics route should be developed to connect the Metropolitan area(Metropolitan Economic Zone), Gangwon roads and railway, Gangwon habor, Trans-Siberian Railway and thw North Pole route, and Europe, to strengthen national foreign trade power in the near future.

• Korea Trade Review
• /
• v.45 no.6
• /
• pp.99-112
• /
• 2020

It is no exaggeration to say that today's world economy is dependent on international trade, which is the result of inter-state transactions. As the vast majority of international goods transport is transported by international shipping, interest in the seaborne transport field is natural in international and trade studies. In particular, in the case of international shipping, as it is the basis of typical international transportation, changes in international shipping due to the innovation of technology may have an effect on international trade norms. In this study, as a result of evaluating port preference in a hypothetical scenario by using the Design of Experiments method, bunkering as well as port service, which is traditionally important, was identified as a major competitive factor of future ports. It has been revealed that, above all, the port to respond to the future is the continued importance of port services and the supply of ship fuel. Therefore, port authorities are providing implications that LNG bunkering infrastructure suitable for international environmental regulations is important.

• Journal of computational fluids engineering
• /
• v.13 no.4
• /
• pp.50-57
• /
• 2008

The prediction of hydrate pellet decomposition characteristics is required to design the regasification process of GTS (gas to solid) technology, which is considered as an economic alternative for LNG technology to transport natural gas produced from small and stranded gas wells. Mathematical model based on the conservation principles, the phase equilibrium relation, equation of gas state and phase change kinetics was set up and numerical solution procedure employing volume averaged fixed grid formulation and extended enthalpy method are implemented. Initially, porous methane hydrate pellet is at uniform temperature and pressure within hydrate stable region. The pressure starts to decrease with a fixed rate down to the final pressure and is kept constant afterwards while the bounding surface of pellet is heated by convection. The predicted convective heat and mass transfer accompanied by the decomposed gas flow through hydrate/ice solid matrix is reported focused on the comparison of spherical and cylindrical pellets having the same effective radius.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.5
• /
• pp.727-733
• /
• 2020

Recently, reciprocating cryogenic pumps are mainly developed for small-and-mid sized fuel supply systems. Centrifugal type pumps are not actively developed. Most cryogenic submerged pumps are imported. For transportation, cryogenic liquefied natural gas requires the liquid pump technology that can works in extreme evironments. In order to transport liquefied natural gas, it is necessary to apply pump technology. This is the fundamental research for developing the submerged pump technology applicable to the transportation and storage system equipment of cryogenic liquefied system. It tries to secure basic design materials through reverse-engineering in the cryogenic submerged pump development. Regarding materials, STS-304 and STS-431 which are stainless materials widely used in the cryogenic area are applied. Aluminum alloy is applied to impeller and upper manifolder and the pump rotates at the high speed of 6,000rpm.