• 플랜트 저널
• /
• 제9권3호
• /
• pp.38-42
• /
• 2013

지속적인 유가 상승과 환경규약 및 안전성, NIMBY현상 등의 문제로 해상 가스전에 대한 관심이 높아지고 있다. LNG-FPSO는 해양 가스전에서 채취된 천연가스의 불순물을 제거하고, condensate와 LPG를 회수하며, 정제된 가스를 이송 가능한 형태로 액화시키는 최첨단 해양플랜트이다. 반면 작업 시 해상 환경에 많은 영향을 받으므로 선체 운동을 고려한 전처리 공정 효율을 파악하고 설계에 반영해야 한다. 본 연구는 LNG-FPSO의 선체 운동 영향 및 제한된 선상 공간의 최적화를 고려한 해상 전처리 기술을 개발하기 위한 기초 연구이다. 이에 아민 흡수공정과 멤브레인 공정을 혼합한 hybrid 공정을 검토하였으며, 일반 아민흡수공정에 비하여 낮은 용매 순환량, 낮은 열용량, 작은 컬럼 크기가 요구되어 해상용 전처리 공정에 적합함을 확인하였다. 이것은 또한 6자유도 운동 실험 및 CFD 해석을 병행하여 시뮬레이션을 가시화함으로써 다양한 해상상태에 따른 LNG-FPSO의 공정 효율을 검토할 수 있다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권8호
• /
• pp.843-848
• /
• 2013

LNG 수요의 증가에 따라, LNG FPSO (부유식 생산저장 하역설비) 선박 및 LNG 선박의 건조도 지속적으로 증가하고 있고, 다양한 형태의 저장탱크 설계가 시도되고 있다. 본 논문에서는 LNG를 저장하는 선박 화물창 내부탱크의 방식으로 5~9% Ni강재를 적용하고, 단열재를 우레탄폼 블록 대신에 펄라이트 분말을 충전하는 새로운 선박 탱크 형식을 제안하였다. 펄라이트 단열재의 적용 가능성을 위하여 필수적으로 검토되어야 하는 펄라이트의 내부탱크 벽체에 가하는 압력, 압력 흡수를 위하여 적용되는 탄성 블랭킷의 특성, 블랭킷의 적정 설계두께, 내부탱크 설계압력 등 설계 인자들을 분석하였다. 연구결과로, 블랭킷의 두께설계 기준은 내부탱크 단열간격의 1/4~1/3 사이가 되어야 하고 적정 두께는 30% 정도가 되었으며, 탱크 설계압력 기준은 블랭킷 두께에 따라 1,500 Pa 이하가 되어야 하는 것으로 얻어졌다.

• 대한조선학회논문집
• /
• 제51권3호
• /
• pp.220-230
• /
• 2014

Typical technical issues associated with Floating LNG (FLNG: FSRU and LNG FPSO) design are categorized in terms of global performance evaluation. Although many proven technologies developed through LNG carrier and oil FPSO projects are available for FLNG design, we are still faced with several technical challenges to clear for successful FLNG projects. In this paper, some of the challenges encountered during development of the floating LNG facility (i.e. LNG FPSO and FSRU) will be reviewed together with their investigated solution. At the same time, research of design improvement including new LNG-related technologies such as combined containment system will be presented to overcome the unrevealed challenges for the FLNG development.

• 대한기계학회논문집A
• /
• 제35권5호
• /
• pp.487-494
• /
• 2011

LNG / LNG-FPSO선박에 사용되는 안전밸브는 배관 시스템으로부터 유체를 방출하여 시스템의 압력을 일정하게 유지시키는데 중요한 역할을 한다. 이러한 안전밸브의 기능적 특성으로 인해 유출계수는 밸브의 성능 중 가장 큰 비중을 차지하며, 선급의 인정을 받기 위해서는 0.8이상의 유출계수가 요구되고 있다. 밸브 성능을 향상시키기 위해서 밸브 내부에서 발생하는 유동특성에 대한 정확한 이해가 필요함에도 불구하고 대부분의 밸브 설계의 경우 현장 작업자들의 경험과 실험에 의한 시행착오에 의존하고 있다. 본 논문에서는 안전밸브에 대한 유동해석을 통해 밸브 내부에 발생하는 압축성 유동현상을 고찰하였고, 실험과 해석에 의한 유출계수를 비교하여 유동해석의 타당성을 검증하였으며, 안전밸브를 지나는 공기의 질량유량을 예측하기 위한 유동해석 모델을 확립하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권6호
• /
• pp.798-805
• /
• 2010

LNG FPSO 액화 플랜트와 같은 초저온 분야에서 플레이트 핀 열교환기의 국내 연구 실적은 전무한 상태이다. 본 연구에서는 플레이트 핀 열교환기의 독자적 기술을 확보하기 위해 응축 열전달 특성을 이론 및 실험적으로 검증하였다. 시뮬레이션 결과 Plain fin을 제외한 Serrated, Wavy fin은 압력 69bar, 온도 $-140^{\circ}C$에서 응축되었고, 국소열전달계수는 Serrated, Wavy, Plain fin 순으로 높게 나타났다. 실험결과는 정상상태에서 10분간 데이터를 획득하였고 시뮬레이션 데이터값과 12% 미만의 오차범위를 만족하였다.

• 한국CDE학회논문집
• /
• 제19권3호
• /
• pp.203-213
• /
• 2014

The O&M (Operation and Maintenance) phase of offshore plants with a long life cycle requires heavy charges and more efforts than the construction phase, and the occurrence of an accident of an offshore plant causes catastrophic damage. So previous studies have focused on design for reliability, and recently many studies have dealt with a maintenance system to prevent unexpected failures. Nowadays due to the emerging ICTs (Information Communication Technologies) and sensor technologies, it is possible to send health monitoring information of important equipment to administrator of an offshore plant in real time, which leads to having much concern on condition based maintenance policy or predictive maintenance. In this study, we have reviewed previous studies associated with condition-based maintenance of offshore plants, and introduced the approaches predicting failures of the compressor which is one of essential mechanical devices in LNG FPSO.

• 산업경영시스템학회지
• /
• 제37권4호
• /
• pp.12-23
• /
• 2014

The O&M (Operation and Maintenance) phase of offshore plants with a long life cycle requires heavy charges and more efforts than the construction phase, and the occurrence of an accident of an offshore plant causes catastrophic damage. So previous studies have focused on the development of advanced maintenance system to avoid unexpected failures. Nowadays due to the emerging ICTs (Information Communication Technologies) and sensor technologies, it is possible to gather the status data of equipment and send health monitoring data to administrator of an offshore plant in a real time way, which leads to having much concern on the condition based maintenance policy. In this study, we have reviewed previous studies associated with CBM (Condition-Based Maintenance) of offshore plants, and introduced an algorithm predicting the next failure time of the compressor which is one of essential mechanical devices in LNG FPSO (Liquefied Natural Gas Floating Production Storage and Offloading vessel). To develop the algorithm, continuous time Markov model is applied based on gathered vibration data.

• Journal of Advanced Research in Ocean Engineering
• /
• 제3권3호
• /
• pp.125-135
• /
• 2017

The paper considers the practical application of the FMEA(Failure Mode and Effect Analysis) method to assess the operational reliability of the LNG(Liquefied Natural Gas) transfer system, which is a potential problem for the connection between the LNG FPSO and LNG carrier. Hazard Identification (HAZID) and Hazard operability (HAZOP) are applied to identify the risks and hazards during the operation of LNG transfer system. The approach is performed for the FMEA to assess the reliability based on the detection of defects typical to LNG transfer system. FTA and FMEA associated with a probabilistic risk database to the operation scenarios are applied to assess the risk. After providing an outline of the safety assessment procedure for the operational problems of system, safety assessment example is presented, providing details on the fault tree of operational accident, safety assessment, and risk measures.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 추계학술대회 논문집
• /
• pp.189-195
• /
• 2000

New concept of LNG-FPSO ship with moonpool and bilge step in bottom is considered and investigated in the point of motion reduction and sloshing phenomena of the cargo and operation tanks. The cargo capacity of the ship of which principle dimensions is L x B x D x t(design) =270.0 x 51.0 x 32.32 x 13.7(m) 16K at 98% loading condition. The two moonpools and rectangular step at bilge part are setted up specially for getting the effect of motion decrease. For the motion analysis, linearized three dimensional diffraction theory with the simplified boundary conditions is used. The six-degree of freedom coupled motion responses are calculated for the LNG-FPSO ship. Viscous effects on the roll motion responses of a vessel are taken into account in this calculation program using an empirical formula suggested by Ikeda, Himeno and Tanaka is used. The case study for the moonpool size had been carried out by theoretical estimation and experimental method. For the optimization of the moonpool size and effect of the step, 9 cases of its size and with and without step are considered. From the results of calculation and experiment, it can be concluded that this designed LNG-FPSO ship have possibility to carry out her missions in the rough sea as for the owner's demand waves condition. The motion responses, especially roll motion, for the designed LNG-FPSO ship are much lower than those of another drillship and shuttle tanker and limit criterions are satisfied. For the check of the cargo tank and operation tank sizes we have performed sloshing analysis in the irregular waves which focuses on the pressure distribution on the tank wall and the time history of pressure and free surface for No.2 and No5. tanks of LNG-FPSO with chamfers. Finally we got the tank size which has no resonance and no impact pressure in all filling in the bow quartering and beam sea.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• 제5권1호
• /
• pp.22-28
• /
• 2002

A New concept for the LNG-FPSO ship, with moonpool and bilge step in bottom, is proposed. This concept is investigated with regard to motion reduction and sloshing phenomena of the cargo and operation tanks. The principal dimensions of the ship are $L\timesb B\times D\times t(design)=270.0\times51.0\times32.32\times13.7(m)$, with a total cargo capacity of 161KT; a 98% loading condition is considered for this study. The moonpools and rectangular step at the bilge have been designed for the purpose of decreasing the motion within the tank. For the motion analysis, linearized three-dimensional diffraction theory, with the simplified boundary condition was used. The six-degree of freedom coupled motion responses were calculated for the LNG-FPSO ship. Viscous effects on the roll motion responses of a vessel were taken into account in this calculation program, using an empirical formula suggested by Himeno(1981). The case study for the moonpool size has been conducted using theoretical estimation and the experimental method. For the optimization of the moonpool size and effect of the bilge step, 9 cases of its size, both with and without bilge step, were involved in the study. no motion responses, especially roll motion, for the designed LNG-FPSO ships are much lower than those of other drill ships and shuttle tankers. The limit criterions are satisfied. To check the cargo tank and operation tank sizes, we performed a sloshing analysis in the irregular waves which focuses on the pressure distribution on the tank wall and the time history of pressure and free surface for No.2 and 5 tanks of LNG-FPSO with chamfers. Finally, optimum tank sire was estimated.