• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.2
• /
• pp.81-86
• /
• 2019

Although the localization rate of shipbuilding and marine equipment goods is set to be 70 percent by 2020, but the localization rate of equipment and materials for shipbuilding and marine facilities is currently 10 to 30 percent. For Korea's Big 3 shipbuilders, which build 70 percent of the world's largest shipbuilders, localization of shipbuilding equipment and equipment is an essential factor. In particular, there is a growing need to localize equipment and materials in terms of the number of lead standards and A/S. It is expected that there will be a rapid expansion of LNG carriers in the future, and it is necessary to develop equipment and equipment materials of LNG ships. In this study, the design and manufacture of LNG vessel equipment was conducted. Design and basic performance tests of 4-inch QCDC for LNG bunkering were conducted.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.2_2
• /
• pp.315-325
• /
• 2023

Recently, various dynamic risk analysis methods have been suggested for estimating the risk index by predicting the possibility of accidents and damage. It is necessary to maintain and support the safety system for responding to accidents by continuously updating the probability of accidents and the results of accidents, which are quantitative standards of ship risk. In this study, when a LNG leakage that may occur in the LN G Fuel Gas Supply System (FGSS) room during LN G bunkering operation, a reliability physical model was prepared by the change in monitoring data as physical parameters to estimate the accident probability. The scenario in which LNG leakage occur were configured with FT (Fault Tree), and the coefficient of the covariate model and Weibull distribution was estimated based on the monitoring data. The possibility of an LNG leakage, which is the top event of FT, was confirmed by changes in time and monitoring data. A method for estimating the LNG leakage based on the reliability physical analysis is proposed, which supports fast decision-making by identifying the potential LNG leakage at the accident.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.05a
• /
• pp.162-163
• /
• 2018

A risk assessment is performed at the initial design stage of LNG-fuelled ships subject to new fuel supply systems due to marine environmental and emissions regulations. Risk assessment involves a series of logical steps that enable systematic risk analysis and evaluation. LNG-fuelled ships mainly consist of a tank for storing LNG, a gas supply unit for supplying LNG to the engine, an engine using LNG as fuel, and a bunkering manifold for receiving LNG. The components of the LNG fuelled ship are determined according to the characteristics, size, rout, and operating distance. Therefore, the risk factors of each ships are different, and the risk analysis also changes. In this study we consider the systems of ships using LNG as a fuel and analyze the risk assessment of certain cases where the actual risk assessment has been carried out.

• Journal of Korea Port Economic Association
• /
• v.30 no.4
• /
• pp.69-89
• /
• 2014

The business performance of port industry is steadily getting worse due to international environmental regulation. The port industry should be prepared according to ambient condition change. IMO(International Maritime Organization) is tightening up environmental regulation of vessel and maritime industry field. ECA(Emission Control Area), starting with the Baltic, has initialized and has been expanded. Korea must strengthen the control of vessel in accordance with IMO's restriction, if Korea is designated as emission control area. These situations cause the expansion of LNG-fuelled ships. Add to the larger trend of ships, Korean government should be done a preemptive action against LNG bunkering industry. This study proposes the concept of floating offshore LNG bunkering system and is conducted its economic feasibility evaluation based on empirical analysis. We examine the theoretical foundation and basic information via "A Planning Study on the Engineering Development of Floating Offshore LNG Bunkering Terminal" in 2013 and we evaluate the business potential by using the report above mentioned. The results of this study are as follows. The values of B/C analysis are between 0.679 and 2.516 depending on market share and R&D contributiveness. In case of 10.9%(market share), if market share are 50% and 60%, the value of B/C analysis are 0.697 and 0.837 respectively. Except in two cases, all remaining values are over 1.0. Moreover, the research is conducted sensitivity analysis to remove the project uncertainty. In order to maintain economical validity, a project manager have to establish business strategies which are not to cause increase of expense and sustain market share and R&D contributiveness in the scenario with normal levels.

• Proceedings of KOSOMES biannual meeting
• /
• 2018.06a
• /
• pp.163-163
• /
• 2018

• Journal of Ocean Engineering and Technology
• /
• v.34 no.2
• /
• pp.77-88
• /
• 2020

In this study, heading characteristics and heading control performances were evaluated to achieve the wave shield effect. The wave shield effect originating from heading control reduces the relative motions of moored vessels in a floating liquefied natural gas bunkering terminal (FLBT). Therefore, loading and off-loading performances are improved through reduced relative motion. For the objective of this study and efficiency of the analysis, a simplified model was used that assuming no relative motion of the moored vessels in the FLBT. The simplified model involved modeling the environmental loads and inertia of several floating bodies, including FLBT, into the environmental loads and inertia of a single vessel. The simplified model was validated through comparisons with model tests. With the simplified model, heading characteristics and heading control simulations were performed using low-frequency planar motion equations. The heading characteristics and heading control performances of FLBT were analyzed through the results of simulations under the expected environmental conditions. The capacity of the tunnel thrust for the heading control performance was confirmed to be adequate for improvement of the loading and off-loading performances using the wave shielding effects under the operation conditions.

• Korea Trade Review
• /
• v.45 no.6
• /
• pp.99-112
• /
• 2020

It is no exaggeration to say that today's world economy is dependent on international trade, which is the result of inter-state transactions. As the vast majority of international goods transport is transported by international shipping, interest in the seaborne transport field is natural in international and trade studies. In particular, in the case of international shipping, as it is the basis of typical international transportation, changes in international shipping due to the innovation of technology may have an effect on international trade norms. In this study, as a result of evaluating port preference in a hypothetical scenario by using the Design of Experiments method, bunkering as well as port service, which is traditionally important, was identified as a major competitive factor of future ports. It has been revealed that, above all, the port to respond to the future is the continued importance of port services and the supply of ship fuel. Therefore, port authorities are providing implications that LNG bunkering infrastructure suitable for international environmental regulations is important.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.3
• /
• pp.174-179
• /
• 2016

To protect the ocean environment, the use of liquefied natural gas (LNG) carriers, bunkering ships, and fueled ships is increasing. Recently, Korean shipbuilders have developed and supplied a partial reliquefaction facility for boil-off-gas (BOG). Despite reasonable insulation, heat leakage in vessel storage tanks causes LNG to be continuously evaporated as BOG. This research analyzed the maximum liquid yield rate for various partial reliquefaction systems (PRS) and considered related factors affecting yields. The results showed a liquid yield of 48.7% from an indirect PRS system (heat exchanges between cold flash gas and compressed natural gas), and 41% from a direct PRS system (BOG is mixed with flash gas and discharged from a liquid-vapor separator). The primary factor affecting liquid yield was heat exchanger effectiveness; the exchanger's efficiency and insulation characteristics directly affect the performance of BOG reliquefaction systems.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.5
• /
• pp.191-195
• /
• 2018

By using an ANSYS product suite (CFX, Ansys Multiphysics), which is a powerful tool for multiphysics analysis of complicated physical phenomena, we performed a structural stress analysis based on fluid flow and heat transfer phenomena within a quick connect/disconnect (QC/DC) bellows system. Considering the extremely low temperatures in the QC/DC environment, an approach to the problem based on complex multi-physics phenomena, where different phenomena interact with each other, is crucial. Therefore, we use a numerical analysis technique where fluid-thermal-structural interactions are combined. In conclusion, when low temperature fluids flow inside bellows, the expected service life is conspicuously reduced due to the thermal stress caused by heat transfer. Therefore, in future research, a structure with considerably reduced thermal stress by robust design optimization will be derived.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.10
• /
• pp.1054-1061
• /
• 2015

The International Maritime Organization (IMO) has been regulating emissions by making mandatory the compliance with institutions aimed at protecting air quality such as the Energy Efficiency Design Index (EEDI), Ship Energy Efficiency Management Plan (SEEMP) and Tier III. Under the circumstances, one of the response measures considered to be the most feasible is the replacement of existing marine fuel with Liquefied Natural Gas (LNG). The industry has been preemptively building infrastructure and developing and spreading engine technology to enable the use of LNG-fueled ships. The IMO, in turn, recently adopted the International Code of Safety for Ships Using Gases or Other Low-Flash-Point Fuels (IGF Code) as an institutional measure. Thus, it is required to comply with regulations on safety-related design and systems focused on response against potential risk for LNG-fueled ships, in which low-flash-point fuel is handled in the engine room. Especially, the Standards of Training, Certification and Watchkeeping (STCW) Convention was amended accordingly. It has adopted the qualification and training requirements for seafarers who are to provide service aboard ships subject to the IGF Code exemplified by LNG-fueled ships. The expansion in the use of LNG-fueled ships and relevant facilities in fact is expected to increase demand for talents. Thus, the time is ripe to develop methods to set up appropriate STCW training courses for seafarers who board ships subject to the IGF Code. In this study, the STCW Convention and existing STCW training courses applied to seafarers offering service aboard ships subject to the IGF Code are reviewed. The results were reflected to propose ways to design new STCW training courses needed for ships subject to the IGF Code and to identify and improve insufficiencies of the STCW Convention in relation to the IGF Code.