• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.145-146
• /
• 2005

This study performs a simulation for an accumulation mechanism of contaminants, which were produced in an industrial belt of inland, on the surface of insulators. From the simulation, silicon insulators presented higher accumulation than that of EPDM(Ethylene Propylene Diene Terpolymer : EPDM) insulators on the same distance in the case of the Virgin polymer insulator, and this result presented the same result in the insulator applied in actual fields. In the case of the accumulation test for the Virgin insulator and insulators used in actual fields, it is evident that the Virgin insulator presented more accumulation than that of the insulator used in actual fields. The results can be caused by the generation of LMW (Low Molecular Weight) on the external material of polymer insulators, and the level of the accumulation can be changed according to the degree of the continuous generation of LMW.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.12
• /
• pp.1890-1894
• /
• 2008

Apoemulsan is a biopolymer with potent emulsification activity, produced by Acinetobacter venetian us RAG-1 (RAG-1). The wee gene cluster is responsible for apoemulsan biosynthesis. The analysis of (i) a putative polysaccharide copolymerase mutant (${\Delta}wzc$), (ii) a putative polymerase mutant (${\Delta}wzy$), and (iii) an apoemulsan-deficient variant (${\Delta}2$) indicated that the wee gene cluster controls the synthesis of two polysaccharides: high molecular weight (HMW) and low molecular weight (LMW). LMW polysaccharide of wee origin was present in LPS isolated from RAG-1 cells, suggesting a link to the Lipid A-core of LPS molecules. SDS-PAGE analysis indicated that apoemulsan is copurified with LPS polysaccharide, with implications in the emulsification activity of RAG-1 polymer.

• Korean Journal Plant Pathology
• /
• v.13 no.2
• /
• pp.113-117
• /
• 1997

Low moleuclar weight (LMW) RNAs were isolated form Korean peonies which expressed symptoms of stunt and epinasty. The LMW plant RNAs were purified by Qiagen column chromatography which could separate viroid specific nucleic acid at differential salt concentration. After the inoculation of the purified RNAs from the peonies, the inoculated tomatoes (cv. Rutgers) expressed the symptoms of stunt and epinasty. Also the same molecular weight RNAs with viroid-like RNAs were isolated from the inoculated tomatoes. Double-stranded cDNA were synthesized by the methods of reverse transcription (RT) and polymerase chain reaction (PCR) with the purified RNA and primers. The same cDNAs associated with viroid-like RNAs wre cloned from the inoculated tomatoes. The cDNA has been sequenced and its 375-nucleotides were arranged into secondary structure. The cloned cDNA showed 47~54% homology compared with other viroids. The sequence homology of the cloned cDNA were partially high with plant genomic RNAs.

• The Korean Journal of Food And Nutrition
• /
• v.16 no.4
• /
• pp.437-443
• /
• 2003

Chitooligosaccharides were prepared by enzymatic hydrolyzing of crab shell chitosan. Low molecular weight chitooligosaccharides(LMW-chitooligosaccharides), 64.3% of which was composed of trimer, tetramer, and pentamer, was obtained by hydrolyzing chitosan with the chitosanase originated Bacillus pumilus BN-262. High molecular weight chitooligosaccharides(HMW-chitooligosaccharides), 49.3% of which was composed of chitooligosaccharides over heptamer, was obtained by hydrolyzing chitosan with the cellulase originated Trichoderma viride. Acute oral toxicity of chitooligosaccharides were tested in mice. Chitooligosaccharides did not have any toxic effect in mice and oral LD$\_$50/ value of chitooligosaccharides was over 5.0g/kg in mice.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.266-269
• /
• 2001

This paper investigated the aging characteristic under long-term corona discharge on loon temperature vulcanized silicone rubber, which has been using as a protective coating material for solving the contaminant problem. The applied electrical field is 10kV/cm ac and corona discharge treatment was applied on RTV silicone rubber sheet for maximum 250 hours. With the duration of corona discharge, the diffusible low molecular weight species increased, which was determined the usage of n-hexane extraction method. In addition, the contaminant layer was formed on the treated surface, and then measured the contact angle. We investigated the relation of contact angle and diffusible low molecular weight species. It is found that scissor of main chain PDMS and side chains (CH$_3$) and the generation of LMW species were occurred by a corona discharge. The improvement of hydrophobicity rate is thought due to the increase of diffusible LMW species.

• Applied Chemistry for Engineering
• /
• v.21 no.5
• /
• pp.532-536
• /
• 2010

A study on the volatile organic compounds (VOCs) and low molecular weight (LMW) amount which is contained within bisphenol A polycarbonate (PC) was performed by the solvent extraction with ketone type solvents (acetone, butanone, pentanone). The LMW amount of untreated PC was 2.6 wt%, but the values of treated samples with acetone and pentanone were 0.96 and 1.53 wt%, respectively. Acetone is a more effective solvent than pentanone on the LMW extraction. Methylene chloride (MC) and toluene were certified and quantified by GC-Mass experiments, and the quantitative results indicated the fact that the pentanone was the effective solvent on VOC extraction. Focused on the change of VOCs and LMW amount, the use of co-solvent might be more useful, and the experimental results of co-solvent extraction showed that the optimum condition was 50 : 50 volume percent.

• Nuclear Engineering and Technology
• /
• v.27 no.6
• /
• pp.870-876
• /
• 1995

In this paper, a new three-dimensional nodal diffusion code which is based on the AFEN methodology is described and tested. The method expands the homogeneous flux within a node in ter-ms of eighteen analytic basis functions satisfying the diffusion equation at any point of the node. And the nodal coupling equations are derived such that nodal balance, current continuity and leakage balance within an infinitesimally small box around the edge are satisfied. To verify its accuracy, the code was applied to the well-known static LMW benchmark problem and a small core benchmark problem that has the same material properties as the three-dimensional IAEA benchmark problem and compared with two other codes (QUANDRY, VENTURE). The results show that the code provides good accuracy both in the power distribution and in the effective multiplication factor.

• Journal of Environmental Health Sciences
• /
• v.27 no.2
• /
• pp.60-66
• /
• 2001

Natural organic matters(NOMs) are found everywhere such as soil, surface and ground waters and consist of both humic and nonhumic components, and their heterogeneith makes each source unique. This study was carried to evaluate the removal characteristics of NOMs by mixing coagulants and the variation of apparent molecular weight distribution(AMWD) in coagulation process. Ratio of optimum coagulants dosage for removal of DOC and turbidity by mixing coagulants was 1.83 mM F $e^{3+}$/mM $Al^{3+}$. DOC removal increased at lower pH. The pH6 control focused on the removal of organic matters could reduce the amount of coagulant consumption by 2 to 3 times based on the pH8.5 of natural water. The dissolved organic matters in the natural water from the mid-stream of Han River were composed of the low molecular weight(LMW,<1 K) of 59.7%, and the medium and high molecular weight(M.HMW, 1~30 K) of 40.3%, respectively. At pH6, the DOC removal efficiencies of LMW(<1 K) and M.HMW(1~30 K) in coagulation process were 27~35%, 62~72%, respectively. The fraction smaller than 1 K was not eliminated to a noticeable degree, while the fraction of 1~30 K was relatively well removed. In conclustion, mixing coagulants were fairly effective in the removal of natural organic matter.r.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.7
• /
• pp.598-606
• /
• 2000

In this paper we investigated the relation between the surface degradations and anti-pollution characteristics of Room Temperature Vulcanized(RTV) silicone rubber coating that has different roughness through immersing into saline water. We utilized several analytic techniques such as atomic force microscopy(AFM) scaning electron microscopy(SEM) contact angle Salt Deposit Density(SDD) and average leakage current under the condition of salt fog. It is found that the surface roughness of treated RTV silicone rubber increased and the hydrophobicity of sample surface decreased with increasing the duration o immersion into water due to the erosion of base polymer the melting down alumina trihydrate(ATH) and the diffusion of Low Molecular weight(LMW) fluid. Despite the roughness of surface had been increased by water immersion excellant anti-pollution and recovery characteristics were maintained and SDD saturated to 0.1~0.14mg/cm$^2$. The average leakage current under salt fog increased with surface roughness. Measurement of average leakage current will be helpful to investigate surface degradation and lifetime expectation of RTV silicone coating.

• Nuclear Engineering and Technology
• /
• v.53 no.11
• /
• pp.3653-3664
• /
• 2021

In PWR three-dimensional transient coupling calculation software CORCA-K, the nodal Green's function method and diagonal implicit Runge Kutta method are used to solve the spatiotemporal neutron dynamic diffusion equation, and the single-phase closed channel model and one-dimensional cylindrical heat conduction transient model are used to calculate the coolant temperature and fuel temperature. The LMW, NEACRP and PWR MOX/UO₂ benchmarks and FangJiaShan (FJS) nuclear power plant (NPP) transient control rod move cases are used to verify the CORCA-K. The effects of burnup, fuel effective temperature and ejection rate on the control rod ejection process of PWR are analyzed. The conclusions are as follows: (1) core relative power and fuel Doppler temperature are in good agreement with the results of benchmark and ADPRES, and the deviation between with the reference results is within 3.0% in LMW and NEACRP benchmarks; 2) the variation trend of FJS NPP core transient parameters is consistent with the results of SMART and ADPRES. And the core relative power is in better agreement with the SMART when weighting coefficient is 0.7. Compared with SMART, the maximum deviation is -5.08% in the rod ejection condition and while -5.09% in the control rod complex movement condition.