• The KIPS Transactions:PartC
• /
• v.10C no.7
• /
• pp.851-856
• /
• 2003

The LM generator is an improved summation generator with maximum period, near maximum linear complexity and maximum order of correlation immunity, and it has a property with the input-output correlation immunity In this paper, we propose the high-speed m-parallel LM-BSG and 8-parallel LM-BSG for detail as a design example. When compared with a conventional stream cipher, the properties of the proposed cipher exhibited the same crypto-degree (security) with a rt times faster processing.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.5
• /
• pp.1104-1109
• /
• 2015

Due to the rapid growth in digital contents, it is important for us to design a high speed and secure encryption algorithm which is able to comply with the existing and future needs. This paper proposes an alternative approach for self-decimated LM-128 summation sequence generator, which will generate a higher throughput if compared to the conventional generator. We design and implement a threshold clock-controlled LM-128 and prove that it has a lower clock cycle and hence giving a higher key stream generation speed. The proposed threshold clock-control LM-128 generator consists of 256 bits inner state with 128 bits secret key and initialization vector. The cipher achieves a security level of 128 bits to be adapted to the digital contents security with high definition and high quality.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.1011-1014
• /
• 2004

본 논문에서 제안된 Self_Decimated LM-128 키 수열 발생기(Keystream generator)는 2개의 비트 메모리 합산 수열발생기(summation generator)를 갖는 자체 클럭 조절형 키 수열 발생기(stream cipher)이다. Self_Decimated LM-128은 LM 계열에서 제시된 특수한 암호로 128비트 키와 128비트 초기 벡터 그리고 257 비트의 내부 상태를 가지며 128 비트의 보안 레벨을 유지한다. 알려진 보안 분석의 공격에 대비해서 2-비트 메모리를 이용한 합산 수열발생기와 자체 클럭 조절형 키 수열 발생기를 포함한다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.7
• /
• pp.3-8
• /
• 2016

We propose a modified form of the decision-directed least mean square (DD LMS) algorithm that is widely used in the optimization of self-adaptive equalizers, and show the modified version greatly improves the initial convergence properties of the conventional algorithm. Existing DD LMS regards the difference between a equalizer output and a quantization value for it as an error, and achieves an optimization of the equalizer based on minimizing the mean squared error cost function for the equalizer coefficients. This error generating method is useful for binary signal or a single-level signals, however, in the case of multi-level signals, it is not effective in the initialization of the equalizer. The modified DD LMS solves this problem by modifying the error generation. We verified the usefulness and performance of the modified DD LMS through experiments with multi-level signals under distortions due to intersymbol interference and additive noise.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.15 no.2
• /
• pp.64-70
• /
• 2019

In recent years, attention has been paid to the integrity of steam generator (SG) tubes due to severe accident and beyond design basis accident conditions. In these transient conditions, steam generator tubes may be damaged by high temperature and pressure, which might result in a risk of fission products being released to the environment due to the failure. Alloy 690 which has increased the Cr content has been replaced for the SG tube due to its high corrosion resistance against stress corrosion cracking (SCC). However, there is lack of research on the high temperature creep rupture and life prediction model of Alloy 690. In this study, creep test was performed to estimate the high temperature creep rupture life of Alloy 690 using tube specimens. Based on manufacturer's creep data and creep test results performed in this study, creep life prediction was carried out using the Larson-Miller (LM) Parameter, Orr-Sherby-Dorn (OSD) parameter, Manson-Haford (MH) parameter, and Wilshire's approach. And a hyperbolic sine (sinh) function to determine master curves in LM, OSD and MH parameter methods was used for improving the creep life estimation of Alloy 690 material.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.449-452
• /
• 2008

Flow difference between reacting and non-reacting case in a swirl stabilized annular combustor is investigated using 3D Large Eddy Simulation with flamelet turbulent combustion model. The combustor of concern is the LM6000, lean premixed dry low-NOx annular combustor, developed by GEAE. Boundary conditions are based on experimental data. Heat release as a result of combustion put the dilatation of density in primary combustion zone highly increased so that the main swirl stream behind of a swirl cup stretched further downstream than that of non-reacting case. The oval shape of core flow in cross-section to flow direction, which clearly observed in non-reacting case, tends to be circle, and small vorticities in wide range in non-reacting case disappears, but the size of iso-vorticity increase in reacting case.

• Journal of KSNVE
• /
• v.5 no.4
• /
• pp.453-460
• /
• 1995

본 논문에서는 정현파 소음을 제어하기 위한 filtered-x LMS에 바탕을 둔 새로운 적응 알고리듬을 제안하였다. 이러한 알고리듬은 두개의 연속적인 계수조정 식으로, 제어기의 계수를 조정한다. 서로 독립인 각 주파수별로 처리하기 때문에 빠른 수렴을 얻을 수 있다. 두번째식은 이차경로로 인한 위상지연을 추정한다. 정현 파 신호 주파수보다 4배 이상 빠른 표본화 주파수를 선택하여 추정된 위상지연 추정 값은 $2{\pi}f_0$만큼 오차를 나타내며, 이 값은 $\pi$2보다 작다. 정현파 신호의 주파수를 알면 이러한 오차는 $2{\pi}f_0$를 더함으로써 제거할 수 있다. 이러한 방법은 위상지연이 $\pi$2보다 큰 경우 수렴속도를 증가시킨다는 사실을 실험을 통하 여 알 수 있다. 추정된 위상지연은 제어기 계수값을 조정하는데 필요한 필터링된 참조신호를 발생시키믄데 사용된다. 참조신호의 위상지연이 각 주파수 성분별로 수행 되기 때문에, 콘볼루션 연산이 생략되어 계산량을 줄일 수 있다. 또한 연속적으로 위상지연을 추정하기 때문에 시변 상황에 적용이 가능하다. 조정식의 수렴조건을 유도하였다. 제안된 알고리듬은 제어기 계수를 추정하는데 바이어스가 없으며, 위상 지연추정을 위한 수렴상수의 최대허용치는 제어기계수에 대한 수렴상수에 반비례함을 이론적으로 분석을 통해 알 수 있다. 모의실험을 통하여 제안된 알고리듬이 filtered-x LMS 알고리듬에 바탕을 둔 다른 알고리듬보다 환경변화에 우수한 성능을 보임을 알 수 있다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1998.05a
• /
• pp.73-78
• /
• 1998

상용 IGCC발전소의 특징적 공정흐름에 대한 분석기술의 확보를 위해 PDU급 IGCC발전계통에 대한 성능평가와 NOx 배출에 대한 모델링을 수행하였다. 향후 IGCC발전소 건설시 선정가능성이 있는 4가지 가스화 공정에서 생산되는 석탄가스를 연료로 하고, 그 발전계통의 대상 가스터빈은 산업현장에서 사용되고 있는 GE사의 LM1600PA를 선정하였다. 석탄가스는 천연가스에 비해 가스터빈의 효율과 출력 상승을 가져오나, 이와 동시에 압축기 탈설계점 작동문제를 야기 시킬 수 있다. 또한 NOx 발생량은 석탄가스 연소시 급격히 증가하며, NOx 제어를 위해 질소분사가 이루어져야 함을 알 수 있었다.

• Korean Journal of Agricultural Science
• /
• v.23 no.2
• /
• pp.227-232
• /
• 1996

It is a tedious job to handle seedling trays in a green house with human hands because of their fluctuation when they are moving. A robotic gripper for handling a seedling tray has been developed., which has two fingers consisting of the vertical and horizontal bars. The maximum deflections at the center of the seedling trays were measured with various lengths of the horizontal bars. The length of 250 mm was revealed to be optimal one, resulting less than 15 mm deflection with a $540{\times}270mm$ seedling tray, which was acceptable for a practical use. For this study a LM system was adopted to move the fingers. To validate this system the robotic gripper was installed on a Cartesian robotic manipulator and their performance was tested several times with great success. The robotic manipulator used in this study was a general one, so a special one for this robotic gripper needs to be developed in future.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.917-920
• /
• 2006

In mobile environments, their is more than one propagation path between each transceiver and Receiver have two or more delayed multipath signals. Delayed multipath signals can cause ISI and Receiver needs a adaptive algorithm to estimate a channel periodically. Also adaptive antenna using adaptive algorithm provide a significant increase in capacity, performance and coverage. This paper describes various LMS algorithm and evaluate the performance of array antenna Base station by using LMS algorithm in the presence of multipath signals and multiple users. As a result of simulation, Adaptive array antenna systems are able to adjust their antenna pattern to select desired signals, and reduce interference.