• Journal of Power Electronics
• /
• 제17권4호
• /
• pp.849-859
• /
• 2017

This paper illustrates the analysis and design of a multi-resonant converter applied to an electric vehicle (EV) charger. Thanks to the notch resonant characteristic, the multi-resonant converter achieve soft switching and operate with a narrowed switching frequency range even with a wide output voltage range. These advantages make it suitable for battery charging applications. With two more resonant elements, the design of the chosen converter is more complex than the conventional LLC resonant converter. However, there is not a distinct design outline for the multi-resonant converters in existing articles. According to the analysis in this paper, the normalized notch frequency $f_{r2n}$ and the second series resonant frequency $f_{r3n}$ are more sensitive to the notch capacitor ratio q than the notch inductor ratio k. Then resonant capacitors should be well-designed before the other resonant elements. The peak gain of the converter depends mainly on the magnetizing inductor ratio $L_n$ and the normalized load Q. And it requires a smaller $L_n$ and Q to provide a sufficient voltage gain $M_{max}$ at ($V_{o\_max}$, $P_{o\_max}$). However, the primary current increases with $(L_nQ)^{-1}$, and results in a low efficiency. Then a detailed design procedure for the multi-resonant converter has been provided. A 3.3kW prototype with an output voltage range of 50V to 500V dc and a peak efficiency of 97.3 % is built to verify the design and effectiveness of the converter.

• 전력전자학회논문지
• /
• 제18권3호
• /
• pp.240-246
• /
• 2013

An Uninterruptible Power Supply(UPS) is a system designed to deliver energy during accidents that the AC mains is out of its acceptable limits, without interruption of power flow through the load. Battery Discharger is the device to supply high quality power to the Inverter, when accidents occur, such as Power Failure. The Battery Discharger should have a fast response characteristics. The LLC resonant converter for UPS battery discharger is proposed. The proposed Battery Discharger offers substantial improvements in efficiency, size and cost. The proposed Battery Discharger of UPS approach is a good solution for high power applications above KW. To verify the validity of proposed Battery Discharger, simulations and experiments are carried out.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.71-74
• /
• 2006

A new multi-output LLC resonant converter is proposed for high efficiency and low cost plasma display panel (PDP) power module. In the proposed converter, zero-voltage (ZV) turn-on of the primary MOSFETs and zero-voltage (ZC) turn-on and turn-off of the secondary diodes are guaranteed in the overall input voltage and output load ranges. In addition, the primary MOSFETs and the secondary diodes have the low voltage stresses clamped to input and the output voltages, respectively. Therefore, the proposed converter shows the high efficiency due to the minimized switching and conduction losses. Moreover, by employing the transformer with multiple secondary windings, the proposed converter can have multiple outputs, which show the great crossregulation characteristics. Therefore, the proposed converter is suitable for high efficiency and low cost PDP power module.

• 전력전자학회논문지
• /
• 제24권4호
• /
• pp.237-243
• /
• 2019

A high-efficiency and small-sized switched-mode line transformer (SMLT) is proposed in this study. The conventional structure of an adapter is composed of line transformer and rectifiers. This structure has a limit in miniaturizing due to low-frequency line transformer. Another structure is composed of power factor correction (PFC) and DC/DC converter. This structure has a limit in reducing volume due to two-stage structure. As the proposed SMLT is composed of an LLC resonant converter, a high-frequency transformer can be adopted to achieve isolation standards and size reduction. This proposed structure has different operation modes in accordance with line input voltage to overcome poor line regulation. In addition, the proposed SMLT is applied to the front of a conventional PFC converter, because the SMLT output voltage is restored to rectified sinusoidal wave by using a full-bridge rectifier in the secondary side. The design of the PFC converter is easy, because the SMLT output voltage is controlled as rectified sinusoidal wave. The validity of the proposed converter is proven through a 350 W prototype.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권7호
• /
• pp.343-350
• /
• 2005

Conventionally, for transferring the primary power to the secondary one, the high frequency series resonant converter has been widely used for the contactless power supply system. However, the high frequency series resonant converter has the disadvantages such as the low efficiency, the high voltage gain characteristics and deviation of the phase angle in the overall load range. To improve this disadvantages, In this paper, the characteristics of the high efficiency and unit voltage gain as well as in-phase are revealed in the proposed three-level LCLC (Inductor-Capacitor- Inductor-Capacitor) resonant converter. The results are verified on the simulation based on the theoretical analysis and the 4kW experimental Prototype.

• 전기전자학회논문지
• /
• 제17권3호
• /
• pp.267-274
• /
• 2013

본 논문은 Pulse Frequency Modulation(PFM)/Pulse Width Modulation(PWM) 듀얼 모드 피드백 기반 LED 백라이트 유닛 구동용 LLC 공진 변환 제어 IC 설계에 대한 내용을 제시한다. 공진형 변환기에서 하나의 변압기를 사용하면서, 두 가지 출력 전압을 생성할 수 있는 구조를 제안하였으며, Master 출력은 PFM 방식으로 Slave 출력은 PWM 방식으로 제어하도록 설계 하였다. 2차 측 Master 출력을 제어하기 위해서 파워 스위치 제어 신호의 주파수를 조절하는 PFM 피드백과 2차 측 Slave 출력을 제어하기 위해서 파워 스위치 제어 신호의 펄스 폭을 조절하는 PWM 피드백 회로를 설계하였다. 설계된 IC는 $0.35{\mu}m$ 2 Poly 3 Metal BCD(Bipolar-CMOS-DMOS) 공정을 이용하여 레이아웃 되었으며, 면적은 $2.3mm{\times}2.2mm$ 이다. 또한, 설계한 칩은 5 V 공급 전압으로부터 26 mA의 전류를 소모하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 전력전자학술대회 논문집
• /
• pp.261-262
• /
• 2016

고효율과 높은 전력밀도를 갖는 LLC 공진컨버터를 플라즈마 공정용 DC 전원장치로 사용하기 위해서는 공정의 특성상 출력 Filter 커패시턴스 값을 작게 설정해야 한다. 이때, 기존의 LLC 공진컨버터와 다른 동작특성을 보이게 되는데, 본 논문에서는 플라즈마 공정용 LLC 공진컨버터에서 출력 Capacitor를 고려한 LLCC 공진 컨버터의 특성 및 변화를 분석하였으며 시뮬레이션을 통해 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.135-138
• /
• 1993

The Modelling, design and analysis of the steady state and performance characteristic of the constant switching frequency P.W.M controlled LLC and LLCC-type P.R.C are presented continuous conduction mode of operation. A set of characteristic frequency are plotted which design parameters can be obtained.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 추계학술대회
• /
• pp.161-162
• /
• 2018

철도챠량에서 일반적으로 사용되는 상용전원은 보조전원장치(이하 SIV)로 불리는 전력변환장치로부터 공급된다. 본 논문에서는 LLC 공진형 컨버터를 적용하여 스위치의 영전압 스위칭(Zero-Voltage-Switching, ZVS)을 통해 높은 효율을 달성하고, 고속스위칭에 의해 인덕터, 커패시터, 트랜스포머와 같은 소자의 부피를 줄이고 시스템의 효율을 높여 기존의 보조전원장치보다 약 40%이상 소형 경량화가 가능한 보조전원장치에 대한 연구를 소개한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.508-510
• /
• 2008

In designing a LLC resonant converter, the ratio of magnetizing inductance ($L_M$) to resonant inductance ($L_R$), the inductor ratio (K) is usually considered. In high power density adapter, both adapter size and efficiency are important factors. Considering the size of adapter, high K design can be more attractive. But, wide frequency variation of high K design results in design difficulty of magnetic elements and decrease in efficiency. To solve these drawbacks, an adaptive link voltage variation (ALVV) control is proposed. With the proposed control method, the LLC resonant converter can be operated at the resonant frequency despite the output voltage variation. The control strategy and schematics are presented, and verified experimentally.