• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.697-700
• /
• 2006

저수시 하천유량(Low Streamflow)의 추정은 하천의 수질관리, 용수공급계획, 댐 방류계획등의 수자원관리에 있어서 매우 중요한 부분이다. 이러한 중요성에 따라 Vogel과 Kroll (1989)은 저수시 하천유량을 추정하기 위한 여러 가지 확률분포함수를 제안하였다. 가장 흔히 제안되어지는 이변수 확률분포(Two-Parameter Distribution)로는 Lognormal 분포와 Weibull 분포가 있으며 이와 더불어 Three-Parameter Lognormal, Three-Parameter Weibull, Log Person Type Ⅲ 분포도 널리 사용되어진다. 그러나 이러한 여러 가지 확률 분포함수 중에서 가장 적절한 확률분포의 선택은 저수시 하천유량의 물리적인 측면과는 상관없이 주로 적합도(Gooness of Fit)에 기인된 통계치에 의해서만 결정되기도 하는데 이러한 경우 잘못된 가정을 받아들이는 확률이 높아짐에 따라 추정결과의 신뢰성(Reliability)을 감소시킬 수 있다. 이러한 문제점을 극복하기 위해서 Onoz와 Bayazit (2001)는 Recession Curve를 지수함수로 가정하고 최대 갈수 기간의 길이(Maximum Dry Period Length)의 확률에 대한 이론적인 결과치들을 사용하여 Weibull 분포의 특정한 경우에 해당되어지는 Power 분포를 유도하였으며 유도된 Power 분포의 매개변수를 추정하기 위하여 L-Moment 방법을 사용하였다. 또한 Onoz와 Bayazit (2001) 작은 유출량에서 확률분포와 잘 맞지 않는 경우 작은 유출량값에 작은 가중치를 부여하여 확률분포에 대한 영향을 줄이는 방법인 LL-Moment 방법을 제안하였다. 본 연구에서는 낙동강 유역의 1번부터 5번 소유역에 대해 SSARR 모형을 이용하여 모의한 유출량을 이용하여 Weibull 분포, L-Moment방법에 의해 추정된 매개변수를 사용한 Power 분포, LL-Moment 방법에 의해 추정된 매개변수를 사용한 Power 분포를 적용하였으며 이들 분포의 적합도를 PPCC Test를 사용하여 평가해봄으로써 낙동강 유역에서의 저수시의 유출량 추정에 대한 Power 분포의 적용성을 판단해 보았다.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송∙미디어공학회 2018년도 추계학술대회
• /
• pp.87-89
• /
• 2018

We proposed an improved reliable SVD-based watermarking scheme resistant to geometric attacks while having high fidelity with no false-positive problem. Principal components of a watermark image are embedded into singular values of LL, LH, HL, and HH sub-bands of a transformed cover image by RDWT(redundant discrete wavelet transform) with optimal scale factors. Each scale factor is generated by trading-off fidelity and robustness using Differential Evolution (DE) algorithm. Zernike Moment (ZM) is used to estimate the geometric distortion and to correct the watermarked image before extracting watermark. The proposed scheme improves fidelity and robustness of existing reliable SVD based watermarking schemes while resisting to geometric attacks.

• 대한치과보철학회지
• /
• 제29권1호
• /
• pp.23-37
• /
• 1991

The understanding the natureof occlusal tooth contacts of natural dentition is important for correct diagnosis and treatment of diseases developed in stomatognatic system. Several investigator have studied the distribution of tooth contacts in maximum intercuspation and have reported contact locations with respect to the tooth position. Many methods have been clinically applied for the occlusal analysis in the intercuspal position. However, there are few quantative methods. This study analyzed the new software version of the T-Scan system to record and analyze occlusal contact balance in the anterior-posterior and right-left directions. Six time moment statistics and five moment statistics were calculated in the midsagittal and the incisal axes of the occlusal plane. In the present study, informed consent was obtained from 100 subjects with natural dentitions. The results were as follows ; 1. The mean of the dental arch length & width were 48.78, 65.32mm in whole population, 49.09mm, 65.50mm in males, 48.78mm, 64.63mm in females, respectively. 2. The mean of TLR & PLR were 0.193mm(left), 0.311mm(left), respectively. Therefore, the distribution of tooth contacts was bilaterally symmetric. 3. The mean of TFB & PFB were 29.168mm, 29.055mm, and that of LFB & RFB were 29.627mm, 29.587mm, respectively, and the qualitative center of occlusal contacts was the firtst molar. 4. The mean of LL & RL were 31.666mm, 31.377mm, respectively, and the quantitative center of occlusal force was the first molar. 5. The mean of LF & RF were 60.237N, 59.276N, respectively and Left-right moment was 72.491Nmm. Therfore, the distribution of occlusal force was bilaterally balanced.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제6권2호
• /
• pp.110-115
• /
• 2006

In pure P2P environment, it is possible to provide service by using a little real-time information without using accumulated information. But in case of using only a little information that was locally collected, quality of recommendation service can be fallen-off. Therefore, it is necessary to study a method to improve qualify of recommendation service by using users' context information. But because a great volume of users' context information can be recognized in a moment, there can be a scalability problem and there are limitations in supporting differentiated services according to fields and items. In this paper, we solved the scalability problem by clustering context information per each service field and classifying it per each user, using SOM. In addition, we could recommend proper services for users by quantifying the context information of the users belonging to the similar classification to the service requester among classified data and then using collaborative filtering.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2000년도 International Symposium on Magnetics The 2000 Fall Conference
• /
• pp.584-584
• /
• 2000

Electronic structures of ordered Fe$_3X (X = Al, Si), and their derivative ternary alloys of Fe_2TX (T = 3d transition metal) have been investigated by using the linearized muffin-tin orbital (LMTO) band method. The role of the coupling between substituted transition metal and its neighbors is investigated by calculating the magnetic moments and local density of states (LDOS). It is shown that it is essential to include the coupling beyond nearest neighbors in obtaining the magnetic moment of Fe alloy. The preferential sites of T impurities in Fe_3X are determined from the total energy calculations. The derivative ternary alloys of Fe_2TX have characteristic electronic structures of semi-metal for Fe_2VAI and (nearly) half-metal for Fe_2TAI (T = Cr, Mn) and Fe_2TSi (T = V, Cr, Mn)

• 한국지진공학회논문집
• /
• 제3권2호
• /
• pp.9-18
• /
• 1999

현행 내진설계 기준과는 달리 내진설계기준연구(II) 에서는 6층 미만의 건물도 내진설계를 적용하도록 제안하고 있다 이 제안서가 향후 내진설계 기준의 근간이 된다면 저층 건물에 대하여서도 내진설계가 수행되어야 할 것으로 예상된다 지진의 세기로 구분할 때 국내의 약지진동 지역으로 구분되며 이와 같은 지역에서의 저층 건물의 초과강도 계수 $\Omega$는 매우 크다고 기조의 연구자들이 보고하고 있다 따라서 본 연구에서는 국내 4층 RC 모멘트 연성 골조의 경우에$\Omega$를 고찰하고자 스팬과 경간(bay)를 변화시키면서 모델을 설계하고 이를 2차원 push-over 해석하였다 수치해석 결과 경간의 수 또는 스팬 길이가 증가함에 따라$\Omega$의 값이 증가하는 추세를 보였다 이는 내진설계시 우발 비틀림 모멘트를 고려함으로 스팬 길이 또는 경간 수의 증가에 비하여 외부기중의 설계강도증가율이 크기 때문이다 또한 외부 기둥의 강도증가는 강기동-약보 모델에 근접한 붕괴기구를 형성하므로 $\Omega$의 증가에 영향을 미치는 것으로 고찰되었다

• 대한조선학회지
• /
• 제11권2호
• /
• pp.15-22
• /
• 1974

As for the added mass moment of inertia of ships in torsional vibration, it seems that the works by T. Kumai[1,2] are the only systematic one available currently. The work[1] is for the calculation of the two dimensional correction factors with finitely-long elliptic cylinders as the mathematic model. In this work the authors recalculated the above factors, $J_{\tau}$, with the same mathematic model and the same problem formulation, and presented the numerical results in Fig. 1. The reason why the reinvestigation was done was that in Kumai's work he obtained the solutions of the Mathieu equations, which was derived from the problem formulation for the velocity potential, under the assumption that the dummy constant q involved in the equations was always far less than unity, whereas in fact it takes values within the region of $0<q{\leq}{\infty}$ in sequence. As a result the authors found two remarkable differences in general features of $J_{\tau}$(refer to Fg.3); one that the authors' numerical results are considerably higher than the results given in [2], and the other that for a given number of node those have properties of decreasing monotonically with increase of the beam-draft ratio while these rapidly decrease from a maximum value of near at B/T=2.00 with B/T becoming greater or less than ratio. It seems that the latter trend was resulted from the fact that the assumption of $q{\ll}1$ employed in [2] was more closely satisfied in the vicinity of B/T=2.00.

• 대한치과보철학회지
• /
• 제29권3호
• /
• pp.121-140
• /
• 1991

Fifteen dental college students of Chosun University without the abnormal occlusion, the history and symptom of temporomandibular dysfunction(TMD), and who had all permanent teeth except third molar and the fifteen moderate group and the fifteen severe group classified according to Helkimo's dysfunction index among patients on the basis of the symptom of TMD were selected. The occlusal contact, occlusal force and occlusal interference in eccentric movement was studied and analyzed using T-Scan system. The result were as follows : 1. The TLR centering around midsagittal axis was located at $1.42{\pm}0.82mm$ in control group, $3.36{\pm}1.45mm$ in severe group, and as TMD was heavier, occlusal contact was located at the farther point from midsagittal axis. 2. The PLR from the first contact to the fifth contact centering around midsagittal axis was located at $1.73{\pm}1.78mm$ in control group, $3.36{\pm}1.41mm$ in moderate group, and $5.39{\pm}4.32mm$ in severe group, and as TMD was heavier, occlusal contact was located at the farther point from midsgittal axis. 3. The TFB, PFB, RFB and LFB of occlusal contact centering around incisal axis had no significant difference statistically among control group, moderate group, and severe group, and it was located at first molar. 4.The LF and RF was smaller in TMD group than in control group. 5. The LR moment of occlusal force centering around midsagittal axis was located at $178.51{\pm}139.81N.mm$ in control group, $466.25{\pm}296.47N.mm$ in moderate group, and $749.18{\pm}588.18N.mm$ in severe group. And as TMD was heavier, it was located at the farther point from midsagittal axis. 6. The RL and LL of occlusal force centering around incisal axis had not-significance statistically among control group, moderate group, and severe group, and it was at the first molar. 7. The number of occlusal interference of the eccentric movement was increased in the patients of TMD.

• 정보처리학회논문지D
• /
• 제8D권1호
• /
• pp.24-31
• /
• 2001

본 논문에서는 다단계 보안 데이터베이스에서 동시성 정도를 향상시키고, 보안 요구사항을 만족하는 향상된 트랜잭션 스케쥴링 프로토콜을 제안한다. 전통적인 직렬성 표기를 가진 두단계 잠금 기법을 다단계 보안 데이터베이스에 적용했다. 이타적 잠금기법은 기부라는 사상을 사용하여 트랜잭션이 더 잇아 그 객체를 요구하지 않을 때 다른 트랜잭션들이 그 객체를 로크할 수 있도록 미리 객체에 대한 로크를 해제함으로써 트랜잭션들의 대기시간을 줄이기 위해서 제안된 것이다. 확장형 이타적 잠금기법은 처음에 기부되지 않은 객체까지도 처리하는 좀 더 완화된 기법이다. 본 논문에서는 다단계 보안 데이터베이스에서 단기 트랜잭션의 기아현상을 최소화하도록 하였다. 본 프로토콜은 확장형 잠금 기법(XAL/MLS)을 기초로 하였으나, 새로운 방법인 다단계 보안 데이터베이스를 위한 양방향 기부 잠금 규약(2DL/MLS)으로 보안 여구와 동시성 제어를 동시에 만족한다. 제안된 프로토콜의 효율성은 실험의 결과로 확인되었다.

• 한국농공학회지
• /
• 제45권1호
• /
• pp.33-44
• /
• 2003

This study was conducted to estimate the design flood by the determination of best fitting order for LH-moments of the annual maximum series at fifteen watersheds. Using the LH-moment ratios and Kolmogorov-Smirnov test, the optimal regional probability distribution was identified to be the Generalized Extreme Value (GEV) in the first report of this project. Parameters of GEV distribution and flood flows of return period n years were derived by the methods of L, L1, L2, L3 and L4-moments. Frequency analysis of flood flow data generated by Monte Carlo simulation was performed by the methods of L, L1, L2, L3 and L4-moments using GEV distribution. Relative Root Mean Square Error. (RRMSE), Relative Bias (RBIAS) and Relative Efficiency (RE.) using methods of L, Ll , L2, L3 and L4-moments for GEV distribution were computed and compared with those resulting from Monte Carlo simulation. At almost all of the watersheds, the more the order of LH-moments and the return periods increased, the more RE became, while the less RRMSE and RBIAS became. The Absolute Relative Reduction (ARR) for the design flood was computed. The more the order of LH-moments increased, the less ARR of all applied watershed became It was confirmed that confidence efficiency of estimated design flood was increased as the order of LH-moments increased. Consequently, design floods for the appled watersheds were derived by the methods of L3 and L4-moments among LH-moments in view of high confidence efficiency.