• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.2
• /
• pp.3-9
• /
• 2016

In this paper, we propose a Radio over Fiber system for small cell applications and for mobile fronthaul networks supporting cloud-radio access networks(RAN). We built a system with a downlink employing orthogonal frequency division multiplexing (OFDM) techniques and an uplink using single carrier-frequency multiple access(SC-FDMA). System parameters are evaluated for various subcarrier modulations and the results of link performance measurements are analyzed.

• Current Optics and Photonics
• /
• v.2 no.5
• /
• pp.407-412
• /
• 2018

An optimal matching approach is proposed to maximally ensure the output power uniformity of the cascaded encoder in the passive optical network (PON) monitoring system based on a remote coding scheme. The calculation results show that the optimum arrangement can effectively reduce the difference of the total insertion loss in comparison to the random arrangement (i.e., 0.07 dB vs 2.67 dB in the cascaded encoder with 16 output ports). The proposed approach realizes the optimum configuration for the $1{\times}2$ optical splitters used without adding any extra components. The test results of the fabricated cascaded encoder with 32 output ports prove the feasibility of the proposed approach.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.205-208
• /
• 2020

This paper examines the approach, enabled by using SiC power devices, to unify the inverter design for central air conditioning (CAC) system for both single- and 3-phase input, and reduce the PFC inductor size to be PCB-mountable. By using SiC-instead of Si-diode in PFC stage, it is possible to increase the switching frequency from 16kHz to 60kHz to reduce the required PFC inductance from 0.93mH to 0.25mH, thus enable PCB-mounting of inductor. With the next step of using 1200V SiC MOSFET instead of Si-IGBT, the DC link voltage can be boosted from 311Vdc to 550Vdc in PFC stage, allowing the inverter and compressor used in 3-phase input CAC be used for single-phase input as well. Furthermore, using SiC MOSFET in inverter stage can further reduce total loss system total loss to 200.8 W. Simulation and experimental results are presented in the paper.

• Analyses & Alternatives
• /
• v.1 no.1
• /
• pp.3-16
• /
• 2017

This paper aims to emphasize the necessity of beginning and developing judicial politics in Korea. Law is constitutive of politics, and judicial politics is vital in understanding how politics is influenced by law. Disappointingly, social science in Korea has not recognized the importance of judicial politics. Judicial branch in Korea does not have the capacity to constrain the executive or other government agencies governed by elected officials. The rule of law does not work. Judicial politics has not yet been introduced in Korea, despite its enormous importance in shaping political economy. The rule of law and courts are believed to be the institutional foundation for economic growth. Law embodied in "no one is above the law" is recognized to provide fairness and stability with a democracy. Little attention to judicial politics results in leaving behind a missing link in a polity. The fortification of the rule of law is necessary to make democracy consolidated in Korea, as shown in impeachment of former president Park Geunhae. A new scholarship in Korea on judicial politics is in need to discuss what conditions under which the rule of law is possible and how to make it sustainable.

• Journal of Korean Society of Transportation
• /
• v.26 no.6
• /
• pp.81-89
• /
• 2008

This paper aims to develop an integrated urban freeway exit-intersection actuated traffic signal control strategy based on which a real-time detection of queue at each of an exit-ramp and an arterial. To evaluate effects of the proposed actuated traffic signal control according to various traffic situations and geometric conditions, this paper analyzed the effects of the proposed traffic signal control strategy according to traffic situations such as the occasion of the arterial being saturated, the occasion of the exit-ramp being saturated, and the occasion of both the arterial and the exit-ramp being saturated. To reflect geometric conditions that influence the effects of the control strategy, this paper evaluated effects before and after applying the actuated traffic signal control strategy according to six cases for both above and under the downstream link length of 200m as proposed by COSMOS. The study results shown that when the link length above 200m, offered a greater effect of applying the actuated traffic control strategy than below 200m. Thus, the actuated traffic signal control through a real-time detection of queue is expected to offer a greater effect at longer downward link.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.4
• /
• pp.377-383
• /
• 2013

This study examined the radiopacity of eight contemporary luting cements by direct digital radiography. Five disc-shaped specimens ($5mm{\times}1mm$) were prepared for each material tested (BisCem, Clearfil SA Luting, Duolink, Maxcem Elite, Multilink Speed, Panavia F 2.0, RelyX Unicem Clicker, V-link). The specimens were radiographed using a Kodak CS 7600 image plate (Carestream Health, Inc., Rochester, NY, USA) and an aluminum step wedge with a range of thicknesses (1.5 to 16.5 mm in 1.5 mm increments) and a 1 mm tooth used as a reference. A dental X-ray machine Kodak 2200 Intraoral X-ray System (Carestream Health, Inc., Rochester, NY, USA), operating at 70 kVp, 4 mA, 0.156 s and a source-to-sample distance of 30 cm, was used. According to international standards, the radiopacity of the specimens was compared with that of an aluminum step wedge using NIH ImageJ software (available at http://rsb.info.nih.gov/ij/).The data was analyzed by ANOVA and a Tukey's post hoc test. Maxcem Elite (5.66) showed the highest radiopacity of all materials, followed in order by Multilink Speed (3.87) and V-link (2.83). The radiopacity of Clearfil SA Luting (1.35), BisCem (1.33), Panavia F 2.0 (1.29) and Duolink (1.10) were between enamel (1.79) and dentin (0.19). RelyX Unicem Clicker (0.71) showed the lowest radiopacity, which was higher than that of dentin. All materials showed a radiopacity above the minimum recommended by the International Organization for Standardization and the American National Standards/American Dental Association with the exception of RelyX Unicem Clicker.

• Korean Journal of Culture and Social Issue
• /
• v.9 no.2
• /
• pp.19-39
• /
• 2003

The purpose of this study was to investigate the degree of link with internet media and a internet addiction disposition of adolescents. The subjects were 500 students attending to middle and high schools consisted of male and female. The instruments were "the questionnaire on the present conditions of internet use" consisted of 14 items(Cronbach's α=.71) and "the internet addiction rating scale" consisted of 20 items(Cronbach's α=.73). These questionnaire were revised by this researcher. For data analysis, chisqure and ANOVA were used. The main results were as follows. First, a boy students and the vocational high school and the middle school each have more negative response than a girl students and the humanistic high schools in the present conditions of internet use and the judgement on a harmful object of internet space. Second, a boy students have higher than a girl students in an internet addiction disposition. Third, an internet addiction related with the times link with internet, the type of internet game, and the content of internet space(a lustful and violent objects). The various methods for the prevent with the internet addiction of adolescents discussed with based on the previous studies.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.2
• /
• pp.153-160
• /
• 2017

Recently, the demand has continued to increase for higher data rates and improved multimedia services through wireless internet access. In order to increase the data rate and link reliability, 3GPP LTE/A and IEEE 802.16e/m WiMAX systems incorporate MIMO transmission schemes. Since the hardware complexity increases with the number of transmit data streams and mobile devices have limited physical dimensions, an multiple input multiple output (MIMO) ystem with two antennas at both the transmitter and the receiver ($2{\times}2$) is considered to be a possible solution for mobile devices. In this paper, a low-complexity soft output MIMO symbol detector based on Modified-SQRD is proposed for mobile devices with two transmit and two receive antennas.

• Journal of Advanced Navigation Technology
• /
• v.16 no.6
• /
• pp.1024-1031
• /
• 2012

In the past, the part of development of that is used for the military aviation target or reconnaissance is being extended to the range of application not only reconnaissance but also civilian industry as the introduction of the newest IT technology and the technical evolution. The Civilian low-cost UAV that is expected growth at the market of UAV in the world is accelerated to the extended applicability in the fields. However, The UAV study is recently focused on the Link and The Data bus because the main decision of the civilian UAV system configuration is not suitable to determinate the factory of price. In this paper is analysed the UAV data bus through the simulation in same condition both the CAN Bus which used the automobile industry and the MIL-STD-1553B which is used the aviation industry. As a comparison result, we identified that the CAN Bus of conventional configuration is possible to transmit the data without the need for a separate coupler equipment against the MIL-STD-1553B data. Thus, we identified that the CAN bus is capable to apply as a low-cost UAV internal data bus to optimize configuration and weight than 1553B.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.5
• /
• pp.42-53
• /
• 2015

Construction industry has the form of industry progressed through mutual cooperation among participants in various fields. Accordingly, it may be referred to as an aggregate of information where various pieces of information are generated and managed according to each construction phase. Most of the information on the construction project is issued in the form of a document. And document management of the site is critical to successful execution of the project. Therefore, in the construction site to use IT technology for efficient information management. But, most of the information on the construction site is managed by the non-structured document. and Information management in the construction site is difficult to lack of information management systems. In this study, proposed construction information database structure and breakdown structure to the information management of the construction site through the BIM technology. Therefore, previous studies were reviewed about the document management and information link management. and Space breakdown structure and information breakdown structure was proposed to structure the information of the construction site and Database for information storage is designed. And, BIM-based construction information database was examined through the application scenario.