• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권1호
• /
• pp.48-59
• /
• 2018

This paper is mainly concerned with developing the formulae of predicting thermal deformation of steel plate due to multi-line heating. By investigating the results of line heating test and numerical analysis, reasonable heat flux model has been defined. Formulae of predicting the transverse shrinkage and the angular distortion as the dominant thermal deformation types in plate forming by line heating have been derived based on the results of line heating test and numerical analysis with varying plate thickness, heating speed and distance between torches. This paper illustrates how the derived formulae are used in investigating the effect of multi-line heating upon the thermal deformation and how they can be used in defining the limit distance with that there is no interacted effect between torches. This paper ends with describing the extension of the present study.

• 대한전기학회논문지
• /
• 제45권2호
• /
• pp.294-300
• /
• 1996

In hydro-generator, a groundwall insulation of stator windings gradually deteriorates due to mechanical, thermal, electrical and environmental stresses. These stresses combine to result in loose windings, delamination of the stator insulation and/or electrical tracking of the endwinding, all of which can lead to stator insulation failures. Conventionally, off-line tests such as partial discharge measurement, DC/AC current and .DELTA.tan.delta. tests has been used for estimation of winding condition. However, off-line test requires large power supply and generator outage. In addition, major cause of insulation problems such as loose wedges and slot dischages may not be found with off-line diagnoses. This paper introduces the on-line partial discharge measurement techniques using frequency spectrum analyzer(FSA) for the generator stator windings. The experimental results from the UIAM #1 hydro-generator confirms a optimistic application of on-line generator diagnosis method as a reliable tool for evaluation of winding condition.

• 스마트미디어저널
• /
• 제4권3호
• /
• pp.44-49
• /
• 2015

Text line segmentation is a preprocessing step in OCR, which can significantly influence the accuracy of document analysis applications. This paper proposes a novel methodology for the text line segmentation of handwritten documents. First, the average width of the connected components is used to form a 1-D Gaussian kernel and a smoothing operation is then applied to the input binary image. The adaptive binarization of the smoothed image forms the final text lines. In this work, the segmentation method involves two stages: firstly, the large connected components are labelled as a unique text line using text line area mapping. Secondly, the final refinement of the segmentation is performed using the Euclidean distance between the text line and small connected components. The group of uniquely labelled text candidates achieves promising segmentation results. The proposed approach works well on Korean and English language handwritten documents captured using a camera.

• 대한수학회논문집
• /
• 제34권1호
• /
• pp.333-349
• /
• 2019

The paper study the curvature theory of a line-trajectory of constant Disteli-axis, according to the invariants of the axodes of moving body in spatial motion. A necessary and sufficient condition for a line-trajectory to be a constant Disteli-axis is derived. From which new proofs of the Disteli's formulae and concise explicit expressions of the inflection line congruence are directly obtained. The obtained explicit equations degenerate into a quadratic form, which can easily give a clear insight into the geometric properties of a line-trajectory of constant Disteli-axis with the theory of line congruence. The degenerated cases of the Burmester lines are discussed according to dual points having specific trajectories.

• ETRI Journal
• /
• 제46권3호
• /
• pp.413-420
• /
• 2024

A dual-band bio-implantable compact antenna with a meander-line structure is presented. The proposed meander-line antenna resonates at the industrial, scientific, and medical (2.4 GHz) and wireless medical telemetry (1.4 GHz) bands. The meander-line structure is selected as a radiating patch given its versatile and effective design. With a dimension of only 10 mm × 10 mm × 0.635 mm, the designed antenna is compact. Considering a skin phantom, the proposed antenna was designed, optimized, and simulated. The Rogers RT/duroid 6010 substrate material with high dielectric constant was used to fabricate the meander-line dual-band implantable antenna, which was validated experimentally. The superstrate was made of the same material. Experiments were conducted on skin-mimicking gel. The designed meander-line antenna has a high peak gain of -21 dBi at 2.4 GHz, and its maximum specific absorption rate is compliant with IEEE safety standards.

• 한국작물학회지
• /
• 제26권1호
• /
• pp.56-68
• /
• 1981

재래종의 수집종 가운데서 선접된 다종다벽계통 (약칭 : MET)의 일반적 대성을 분석하여 청예용 옥수수의 육종을 위한 기초자료를 얻고져 수행한 시험결과를 요약하면 다음과 같다. 1. 주요 특성들의 환경변이와 유전변이를 추정하였던 바 MET계통의 분벽성, 개체당 이삭수(수수)는 환경변이보다도 유전변이가 큰 것으로 추정되었다. 개체당 건물중 및 건엽중 등도 유전변이가 커 MET 계통의 유전적 특성으로 확인되었다. 그러나 건기중, 입중 등은 환경변이가 컸었다. 2. 몇가지 특성의 평균치를 두 품종간에 비교하면 다음과 같다. 가. 분벽기수 및 이삭수 : 수원 19호는 환경변이 (파종기, 재식밀도)에 관계없이 분벽기이 없고 이삭수도 변하지 않았으나 MET계통은 분벽기수 및 이삭수가 크게 달라졌다. 나. 개체당 건물중, 건엽중 및 건기중 : 파종기나 재식밀도에 따라 다르기는 하지만 MET계통의 개체당 건물이 수원 19호보다 비교적 높았으며 건엽중은 월등히 높았고(1.5-2.5)배 개체당 건기중도 비교적 높았다. 다. 개체당 입중 및 입중 대 건기엽중비 : MET계통의 개체당 입중은 수원 19호보다 5～40% 낮았다. 따라서 MET계통의 입중 대 건기엽중비가 평균 35%였고 수원 19호는 41%로서 높았다. 3. MET계통은 파종 2주 후부터 분벽하기 시작하여 3 ～ 5일간격으로 다음 분벽이 되었으며 생육초기에 왕성하여 최고 6~7개에 이르나 2~3개만이 유효기으로 신장되였다. 유효기비율은 소식일수록 높았다. 분벽의 발생은 주기의 최하절읍부터 시작되는 데 하부절위가 짧아 한절위에서 분벽이 여러개 발생하는 것처럼 보였다. 제 1, 2분벽기의 기장은 주기의 것에 비하여 10cm 정도씩 짧았으며 재식밀도에 따라 주기 및 제일, 이분벽기의 기장은 소식(60$\times$60cm)한 경우 밀식(60$\times$20cm)한 경우와 같이 분벽들에 의한 밀식의 효과가 있었고 중간재식밀도(60$\times$40cm)인 경우에는 소ㆍ밀도의 중간되는 기장을 보였다. 4. MET계통은 개체당 이삭수가 많은 것에 반하여 이삭의 크기는 수원 19호의 \frac{1}{3}도 못되었다. 각분벽기에 달리는 이삭수는 소식의 경우 주기에 4개, 제일, 이분벽기에 2～3개씩 달렸다. MET계통의 입은 경입종이며 황색입이 주가되고 백색입이 약간 섞여 있었으며 100입중은 14~15gr. 의 소입종이었다. MET계통은 착수고가 수원 19호보다 훨씬 높았다. 5. 주요 특성간의 상간 : 수원 19호에 비하여 MET 계통은 주요 특성간에 높은 상관계수를 보여 유전상관도 높을 것이라는 것을 간접적으로 나타내주었다. 6. MET계통은 생장속도가 수원 19호보다 훨씬 늦었으며 개화기도 2~3주나 늦었다. 7. 흑조위축병 : 수원 19호와 같이 MET계통도 흑조위축병에 대해 이병성이었다. 이병성은 늦게 파종하거나 밀식할수록 높아지는 경향이 있었다.

• The Journal of Advanced Prosthodontics
• /
• 제5권1호
• /
• pp.9-15
• /
• 2013

PURPOSE. The purpose of this study was to determine accurately the part of the tragus to be used to form the Ala-Tragal line or Camper's line in orthognathic profile patients. MATERIALS AND METHODS. 150 dentate subjects with age of 18-40 years with orthognathic profile were sampled. Life-size lateral digital photographs of the face with fox plane were taken in natural head position. Different angles between Eye-Ear plane and occlusal plane ($OT_1$-OP), Eye-Ear plane and ala-superior border of tragus ($OT_1-AT_1$), Eye-Ear plane and ala-middle border of tragus ($OT_1-AT_2$) and Eye-Ear plane and ala-inferior border of tragus ($OT_1-AT_3$) were calculated using computer software package, AutoCAD 2004. From the three angles formed by the Eye-ear plane ($OT_1$ or FH plane) and the ala-tragal lines, the one closest to the angle formed between Eye-Ear plane ($OT_1$) and occlusal plane (OP) was used to determine the occlusal plane of orientation. The obtained results were subjected to ANOVA F test, Tukey's Honestly significant difference test, followed by Karl Pearson coefficient of correlation test. P values of less than 0.05 were taken as statistically significant. RESULTS. The mean of base line angle i.e. $OT_1$-OP angle ($11.96{\pm}4.36$) was found to be close to $OT_1-AT_2$ angle ($13.67{\pm}1.93$) and $OT_1-AT_3$ angle ($10.31{\pm}2.03$), but $OT_1$-OP angle was found to be more closer to $OT_1-AT_3$ angle. Comparison of mean angles showed that $OT_1$-OP angle in both males (11.68) and females (12.51) is close to $OT_1-AT_3$ angle (males- 11.01, females- 11.95). CONCLUSION. The line joining from ala to the lower border of the tragus was parallel to the occlusal plane in 53.3% of the subjects. There was no influence of the sex on the level of occlusal plane.

• 천문학회지
• /
• 제35권2호
• /
• pp.105-110
• /
• 2002

We present the results of VLA $NH_3$ (1,1) and (2,2) line observations of the young-stellar object (YSO) IRAS 19550+3248. The integrated intensity map of the $NH_3$ (1,1) line shows that there are two ammonia cores in this region; core A which is associated with the YSO, and core B which is diffuse and located at the northeast of core A. Core A is compact and elongated along the east-west direction (0.07 pc$\times$0.05 pc) roughly perpendicular to the molecular outflow axis. Core B is diffuse and extended (0.18 pc$\times$0.07 pc). $NH_3$ (2,2) line is detected only toward core A, which indicates that it is hotter (~ 15 K), presumably due to the heating by the YSO. The $NH_3$ (1,1) line toward core A is wide (${\Delta}v{\ge} 3 km s^{-l}$) and appears to have an anomalous intensity ratio of the inner satellite hyperfine lines. The large line width may be attributed to the embedded YSO, but the hyperfine anomaly is difficult to explain. We compare the results of $NH_3$ observations with those of previous CS observations and find that the CS emission is detected only toward core A and is much more extended than the $NH_3$ emission.

• Journal of Microbiology and Biotechnology
• /
• 제23권8호
• /
• pp.1116-1122
• /
• 2013

Cell line development is the most critical and also the most time-consuming step in the production of recombinant therapeutic proteins. In this regard, a variety of vector and cell engineering strategies have been developed for generating high-producing mammalian cells; however, the cell line engineering approach seems to show various results on different recombinant protein producer cells. In order to improve the secretory capacity of a recombinant tissue plasminogen activator (t-PA)-producing Chinese hamster ovary (CHO) cell line, we developed cell line engineering approaches based on the ceramide transfer protein (CERT) and X-box binding protein 1 (XBP1) genes. For this purpose, CERT S132A, a mutant form of CERT that is resistant to phosphorylation, and XBP1s were overexpressed in a recombinant t-PA-producing CHO cell line. Overexpression of CERT S132A increased the specific productivity of t-PA-producing CHO cells up to 35%. In contrast, the heterologous expression of XBP1s did not affect the t-PA expression rate. Our results suggest that CERT-S132A-based secretion engineering could be an effective strategy for enhancing recombinant t-PA production in CHO cells.

• 농업과학연구
• /
• 제9권2호
• /
• pp.540-545
• /
• 1982

한국(韓國)에서 사육(飼育)되고 있는 닭의 육용종(肉用種) Hubbard bro.와 Cobb 및 난용종(卵用種) Hy line 그리고 우리나라에서 육종(育種)된 한협(韓協)325호(號)의 병아리를 공시동물(供試動物)로 하고 개방식중량측정형(開放式重量測定型) 호흡시험장치(呼吸試驗裝置)를 사용(使用)하여 에너지대사량(代謝量)을 측정(測定)한 결과(結果)는 다음과 같다. 1. 병아리를 9 주령(週齡)까지 cage에서 사육(飼育)한 1수당(首當) 평균(平均) 체중(體重)은 Hubbard bro.가 2570.7g이고 Hy line은 776.9g였으며 한협(韓協)325호(號)는 748g 이었다. 2. 주별(週別) 1 수당(首當) 사료섭취양모(飼料攝取量)은 3주령(週齡)에서 Hubbard bro. 가 54.6g으로 Hy line의 26.7g에 약(約) 2배(倍)였으며, 8령(週齡)에서는 151.1g과 57.2g 으로 약(約) 3배(倍) 정도(程度)였다. 음수량(飮水量)은 5주령(週齡)에서 Hubbard bro.가 1일(日) 평균(平均) $226m{\ell}$, Hy line 이 $58m{\ell}$, 8주령(週齡)에서는 $282m{\ell}$와 $70m{\ell}$였다. 3. 분(糞)의 배설량(排泄量)은 4주(週)와 8주령(週齡)에서 완전건조상태(完全乾燥狀態)로 1일(日) 1수당(首當) Hubbard bro.가 18.7g과 41.5g이었고 Hy line은 6.1g과 10.0g이었다. 4. 에너지 섭취량(攝取量)과 배설량(排泄量)은 3, 5, 8주령(週齡)에서 사료섭취(飼料攝取)에너지와 분(糞)의 배설(排泄)에너지를 측정(測定)하여 대사(代謝)에너지를 조사(調査)한 결과(結果) Hubbard bro. 는 75.4~77.1%였고 Hy line은 75.0~83.5%로 난용종(卵用種)의 사료이용율(飼料利用率)이 높았다. 5. 병아리의 호흡상(呼吸商)은 육용종(肉用種)이나 난용종간(卵用種間)에 차이(差異)를 인정(認定)할 수 없었으며 0.78에서 0.97사이였는데 사료섭취량(飼料攝取量)이 적으며 0.78로 떨어졌으며 많아짐에 따라 0.97로 증가(增加)하였다. 6. 대사체중(代謝體重)에 대한 에너지의 발생량(發生量)은 83.1~123.1Kcal로서 24시간(時間)동안 사료(飼料)의 섭취(攝取)를 거의 하지 않은 상태(狀態)에서는 83.4Kcal로 기초대사량(基礎代謝量)에 근사(近似)하였고 동물상내(動物箱內)의 온도(溫度)가 $27{\sim}34^{\circ}C$로 높을 때에는 123.1Kcal로 증가(增加)하는 현상(現像)을 나타냈다.