• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.185-185
• /
• 2010

유기 발광 소자에서 $Li_2CO_3$를 전자 주입층으로 사용하여 전류, 전압, 휘도 그리고 수명을 살펴 보았다. 전자 주입층을 사용함으로써 음전극과 전자 수송층 사이의 전자 주입의 에너지 장벽을 낮출 수 있다. 전자 주입층에 Ca, Mg, Li 등과 같은 낮은 일 함수의 금속을 사용하면, 음전극과 유기물층 사이의 효과적인 전자 주입을 도울 수 있다. 소자의 구조는ITO/TPD(40nm)/$Alq_3$(60nm)/$Li_2CO_3$(xnm)/Al(100nm)으로 하였으며, $Li_2CO_3$의 두께를 0.1, 0.2, 0.3, 0.5, 0.7, 0.9, 1.2, l.5nm로 변화시켜 소자를 제작하였다. $Li_2CO_3$의 박막 두께가 0.3nm일 때, 전자 주입층을 사용하지 않은 소자에 비하여 효율은 2.4배 증가하였고, 구동전압은 0.75V 낮아졌다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.19-20
• /
• 2007

At first the $Ba_{0.5}Sr_{0.5}TiO_3$-MgO powder with $B_2O_3-Li_2CO_3$ were made by the Sol-Gel method. The thick films of BST-MgO with $B_2O_3-Li_2CO_3$ were fabricated on the $Al_2O_3$ substrates coated with Pt by the screen printing method. The structural and dielectric properties of the BST-MgO thick film with $B_2O_3-Li_2CO_3$, addition were investigated. The structure of the BST-MgO with $B_2O_3-Li_2CO_3$ thick films were dense and homogeneous with no pores. The dielectric constant was increased and dielectric loss was decreased with increasing the sintering temperature.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1261-1262
• /
• 2007

At first the $Ba_{0.5}Sr_{0.5}TiO_{3}$-MgO powder with $B_{2}O_{3}-Li_{2}CO_{3}$ were made by the Sol-Gel method. And then the thick films of BST-MgO with $B_{2}O_{3}-Li_{2}CO_{3}$ were fabricated on the $Al_{2}O_{3}$ substrates coated with Pt by the screen printing method. The structural and dielectric properties of the BST-MgO thick film with $B_{2}O_{3}-Li_{2}CO_{3}$ addition were investigated. The structure of the BST-MgO with $B_{2}O_{3}-Li_{2}CO_{3}$ thick films were dense and homogeneous with no pores. The dielectric constant and dielectric loss were increased with decreasing the $B_{2}O_{3}-Li_{2}CO_{3}$ addition ratio.

• Clean Technology
• /
• v.24 no.1
• /
• pp.77-84
• /
• 2018

In this study, $Li_4Ti_5O_{12}$ anode materials for lithium ion battery were synthesized by dry ball-mill method. Polyvinyl chloride (PVC) as a carbon source was added to improve electrochemical properties. When the PVC was added after $Li_4Ti_5O_{12}$ formation, the spinel structure was well synthesized and it was confirmed by X-ray diffraction (XRD) experiments. When the carbon material was added before the synthesis and the heat treatment was performed, it was confirmed that a material having a different crystal structure was synthesized even when a small amount of carbon material was added. In the case of $Li_4Ti_5O_{12}$ without the carbon material, the electrical conductivity value was about $10{\mu}S\;m^{-1}$, which was very small and similar to that of the nonconductor. As the carbon was added, the electrical conductivity was greatly improved and increased up to 10,000 times. Electrochemical impedance spectroscopy (EIS) analysis showed that the size of semicircle corresponding to the resistance decreased with the carbon addition. This indicates that the resistance inside the electrode is reduced. According to the Cyclic voltammetry (CV) analysis, the potential difference between the oxidation peak and the reduction peak was reduced with carbon addition. This means that the rate of lithium ion insertion and deinsertion was increased. $Li_4Ti_5O_{12}$ with 9.5 wt% PVC added sample showed the best properties in rate capabilities of $180mA\;h\;g^{-1}$ at 0.2 C-rate, $165mA\;h\;g^{-1}$ at 0.5 C-rate, and $95.8mA\;h\;g^{-1}$ at 5 C-rate.

• Journal of Haehwa Medicine
• /
• v.10 no.1
• /
• pp.269-286
• /
• 2001

Objectives : This Investigation was aimed to find out the Classification of Cause and the Effect of Acupuncture and Moxibustion Treatment for Dentalgia Methods : We surveyed the oriental medical books from $\ll$HungTiNeiChing$\gg$ to recent published books concerning the Acupuncture therapy for Dentalgia Results : 1. Since the time of $\ll$HungTiNeiChing$\gg$ there was called "yateng", "yatong", "chiyaqutong", "kouchitong", "nichi", "chichong", "fengchi", "chongshitong", "chongshiyachi", "chifengzhongtong", "chiyinzhong", "yachuangzhongtong" 2. The Oriental Medical cause of Dentalgia are fire, wind, cold, blood stasis, stomach-heat, phlegm, difficiency of kidney, late snack, insect and wound, and then the Western Medical cause are cacodontia, periodontal disease, trigeminal nerve pain, stress 3. The meridians used for the treatment are large intestine, stomach, triple warmer, gallbladder and small intestine 4. The most frequently used acupuncture point for the treatment are Hapkok(LI3), Naejong(S44), Hyopko(S6), Igan(LI2), Sohae(H3), Yanggok(SI5), Hagan(S7), Taeyong(S5), Samgan(LI3), Kokehi(LI11) 5. The most frequently used moxibustion for the treatment are Sungjang(CV24), Yolgyol(L7), Kyonu(LI15), Taeyon(L9), Hapkok(LI3) 6. In the superior dental pain there commonly used the acupuncture point of stomach meridian, triple warmer meridian, gallbladder meridian in the inferior dental pain there commonly used the acupuncture point of large intestine meridian. 7. The most frequently used acupuncture point for the superior dental pain are Naejong(ST44), Yanggok(SI5), Chongnyong(G17), Kakson(TE20), In the inferior detal pain there are Taeyong(S5), Hapkok(LI3), Igan(LI2), Sangyang(LI1), Samgan(LI3) 8. In the treatment of dental pain The Acupuncture therapy utilized the division of region are the Erzhen therapy(耳針療法), the Touzhen therapy(頭鍼療法), the Shouzhen therapy(手鍼療法), the Zuzhen therapy(足鍼療法), the Bizhen therapy(鼻針療法), the Wanhuaizhen therapy 9. In dental pain the other therapy are the Taozhen therapy(陶鍼療法), the Pifuzhen therapy(皮膚針療法), the Dianzhen therapy(電鍼療法), the Yaozhen therapy(藥針療法).

• Journal of Radiation Protection and Research
• /
• v.22 no.3
• /
• pp.135-141
• /
• 1997

The study of anneal characteristics is important for TL dosimeter to reuse. To obtain the annealing condition of the recently developed, new TL dosimeter, LiF:Mg,Cu,Na,Si Teflon Tills in a disk type (diameter 4.5 mm, thickness about $90mg/cm^2$), we studied for pre-irradiation annealing, readout procedure and post-readout annealing, in order. The gamma irradiations were carried out with a $^{60}Co$, dose of 0.1 Gy. We have used the method that observe the variation of thermoluminescent(TL) intensity of these Teflon TLDs over repeated cycles by changing both anneal temperature and anneal time with the TLD reader and the oven. There is a 5% loss in sensitivity over the ten repeated readouts by the annealing condition:pre-irradiation annealing at $80^{\circ}C$ for one hour, readout to $280^{\circ}C$ and post-readout annealing at $270^{\circ}C$ for 20 seconds.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.21 no.3
• /
• pp.170-175
• /
• 2018

Purpose: Lactose intolerance (LI) is perceived to be frequent in Asia and has been reported to have considerable impact on dietary intake, nutritional status and the quality of life. We aimed to gather information from healthcare professionals on the perceived incidence, diagnosis and management of LI in 1 to 5 year old children in Southeast Asia. Methods: An anonymous electronic survey was sent randomly among healthcare professionals registered in the database of the pediatric societies in Thailand, Indonesia, and Singapore between June and October 2016. Results: In total, 259 health care professionals responded of which 45.5% (n=118) were from Thailand, 37.4% (n=97) from Indonesia and 16.9% (n=44) from Singapore. Of the participants who responded (n=248), primary LI prevalence among children 1 to 3 years of age was estimated to be less than 5% by 56.8%. However, about 18.9% (n=47) answered they did not know/unsure. Regarding secondary LI, 61.6% of respondents (n=153) estimated the prevalence to be less than 15%. But again, 10.8% (n=27) answered they did not know or unsure. Rotavirus gastroenteritis was ranked as the top cause for secondary LI. There was considerable heterogeneity in the diagnostic methods used. The majority of respondents (75%) recommended lactose-free milk to manage primary and secondary LI. Conclusion: More education/training of pediatricians on this topic and further epidemiological studies using a more systematic approach are required.

• Korean Journal of Materials Research
• /
• v.5 no.8
• /
• pp.1005-1112
• /
• 1995

The Effects of 0~9% stretching on the microstructure and mechanical properties have been investigated in Al-Li-Cu-Mg alloys. Stretching made T$_1$(Al$_2$CuLi) precipitates finer and more uniform, however, had no effect on the size of $\delta$'. The number of sheared $\delta$'precipitates distributed in the matrix were reduced. The 6% stretching improved the yield strength of the alloys aged at 15$0^{\circ}C$ for 120 hours from 328~342 MPa to 466~488MPa, however, decreased the elongation from 9.7~10.4% to 5.7%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.277-278
• /
• 2008

Orthorhombic $LiMnO_2$(o-$LiMnO_2$) has attracted public attentions as a cathode materials of Lithium ion battery because it has low cost and high theoretical discharge capacity of 285mAh $g^{-1}$. In our study, o-$LiMnO_2$ is synthesized by quenching method. To verify their phase structure, X-ray diffraction is accomplished. Test cells are assembled to check electrochemical characteristics using acquired o-$LiMnO_2$ cathode and carbon anode. Charge/Discharge cycling was carried out for 50cycles. And impedance was measured at 1, 2, 5, 10, 30, 50cycle. During cycle test, the max discharge capacity was recorded 139mAh $g^{-1}$ at 10cycle.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.263-266
• /
• 2010

The research design of the road for the LiDAR survey data was available, LiDAR data currently exists for this area Daejeon, Gongju area two map sheet selected of the LiDAR data and figures were produced using the DEM, respectively. The scale 1 / 5, 000 of figures produced by using the DEM and LiDAR DEM data comparing the results produced by the difference in some areas or That could be found. The accuracy of LiDAR data in the road design to use more accurate information on terrain, roads and construction of the linear installation cost savings Contribution will be considered.