• 청정기술
• /
• 제14권3호
• /
• pp.171-175
• /
• 2008

본 연구에서는 첨가물이 전기화학적 성능에 미치는 효과를 알아보기 위해 실험변수로서 첨가물 $Al^{3+}$를 사용하였다. Zero-strain 삽입 혼합물로 알려진 $Li_{4}Ti_{5]O_{12}$에 $Al^{3+}$가 첨가된 $Li_{3.95}Al_{0.15}Ti_{4.9}O_{12}$를 high energy ball milling (HEBM)을 사용하여 고상반응으로 제조한 후에, $800,\;900,\;1000^{\circ}C$에서 열처리하여 시료를 제조하였다. 합성물질의 구조적 특성과 입자의 표면분석을 하기 위해 XRD (X-ray diffraction)와 SEM (scanning electron microscopy)을 사용하였으며, 이때의 입자의 분포는 대략 $0.2{\sim}0.6\;{\mu}m$ 정도로 측정되었다. 충/방전 실험은 $1.0{\sim}3.0 V$에서 하였으며, 가역용량, 사이클 안정성, 평탄 전압 등을 알아보았다. $Li_{3.95}Al_{0.15}Ti_{4.9}O_{12}$의 충방전 용량은 138 mAh/g이었다.

• 한국방사선학회논문지
• /
• 제17권1호
• /
• pp.17-23
• /
• 2023

본 연구에서는 중성자 반응단면적이 높은 Li, Gd 및 B을 모체로 구성된 중성자 검출용 Li₆Y_0.5Gd_0.5(BO₃)₃ (LY_0.5G_0.5BO) 섬광체의 전자포획준위에 대하여 조사하였다. LY_0.5G_0.5BO 섬광 단결정에 대하여 열형광곡선을 측정하고 이를 피크형상법, 초기상승법 및 기계학습 알고리즘을 이용하여 분석하여 전자포획준위의 물리적인 인자를 평가하였다. LYGBO 섬광 단결정의 열형광곡선은 단일 피크로 이루어져 있으며, 이 피크를 분석한 결과 전자포획준위의 활성화에너지, 발광차수 및 주파수인자는 각각 0.61 eV, 1.1 및 1.7×10⁷ s^-1이었다. 아울러 기계학습을 이용한 섬광체의 열형광 해석의 가능성을 확인하였다.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권4호
• /
• pp.487-494
• /
• 1995

The purpose of this study is to research and develop solid polymer electrolyte(SPE) for Li secondary battery. We investigated the effects of lithium salts, plasticizer addition, temperature dependence of conductivity and electrochemical stability window of polyethylene oxide(PEO) electrolytes. PEO electrolyte completed with LiCIO$\_$4/ shows the better conductivity than the others. PEO-LiCIO$\_$4/ electrolyte, when EO/Li$\^$+/ ratio is 8, showed adequate conductivity around room temperature. By adding propylene carbonate and ethylene carbonate to PEO-LiCIO$\_$4/ electrolyte, its conductivity was higher than that of PEO-LiCIO$\_$4/ without those. Also PEO$\_$8/LiCIO$\_$4/ electrolyte remains stable up to 4.5V vs. Li/Li.

• Bulletin of the Korean Chemical Society
• /
• 제31권5호
• /
• pp.1267-1269
• /
• 2010

The pure crystalline $Li_{1.1}V_{0.9}O_2$ powder has been prepared by a simple solid state reaction of $Li_2CO_3$ and $V_2O_3$ precursors under nitrogen gas containing 10 mol % hydrogen gas flow. The structure of $Li_{1.1}V_{0.9}O_2$ powder was analyzed using Xray diffraction (XRD) and scanning electron microscope (SEM). The stoichiometric $Li_{1.1}V_{0.9}O_2$ powder was used as anode active material for lithium secondary batteries. Its electrochemical properties were investigated by cyclic voltammetry and constant current methods using lithium foil electrode. The observed specific discharge capacity and charge capacity were 360 mAh/g and 260 mAh/g during the first cycle, respectively. In addition, the cyclic efficiency of this cell was 72.2% in the first cycle. The specific capacity of $Li_{1.1}V_{0.9}O_2$ anode rapidly declines as the current rate increases and retains only 30 % of the capacity of 0.1C rate at 1C rate. The crystallinity of the $Li_{1.1}V_{0.9}O_2$ anode decrease as discharge reaction proceeds. However, the relative intensity of main peaks was almost recovered when the cell was charged up to 1.5 V.

• The Korean Journal of Ceramics
• /
• 제5권3호
• /
• pp.250-254
• /
• 1999

Synthesis of the spinel $LiMn_2O_4$ by emulsion method was investigated. $LiOH.H_2O \;and \;Mn(NO_3)_2.6H_2O$ were used as starting materials to prepare mixed aqueous solution (0.5 mol/$\ell$ for the $LiMn_2O_4$). Kerosene, paraffin oil and span 80 were used for organic phase. The aqueous solutioin and organic phase were mixed in the ratio of 2:1 and emulsified at the speed of 4000 rpm for 5 min. The prepared emulsions were dropped into the petroleum heated at $170^{\circ}C$ to evaporate water in the silicon oil bath, dried at $120^{\circ}C$ in the oven the remove petroleum and calcined at temperature ranges from 600 to $900^{\circ}C$ for 48 hrs. The characteristics of powders were investigated by XRD, SEM, BET and electrochemical properties of synthesized cathode materials were measured with Galvanostatic system. $Li_{1.05}Mn_2O_4$ calcined at $800^{\circ}C$ for 48 hrs showed initial discharge capacity of 125.9mAH/g.

• 한국세라믹학회지
• /
• 제18권3호
• /
• pp.163-170
• /
• 1981

The crystallization of $Li_2O-SiO_2$ system glasses and the effect of phase separtion to crystal nucleation were studied. The crystallization temperatures of various glasses were determined by DTA and glasses were nucleation heat treated at the temperatures ranging from 45$0^{\circ}C$ to 5$25^{\circ}C$. These glasses were thengown at $700^{\circ}C$ to observable size in the optical microscope. Crystal nucleation rates of various glasses were obtained by estimating the number of crystals per unit volume. The main crystal phase of these glasses identified by X-ray diffraction was lithium disilicate ($Li_2O$.$2SiO_2$). It was found that the crystal nucleation rate of glass (19.5% $Li_2P$-80.5% $SiO_2$), the nearest composition to lithium disilicate, was higher than other glasses. The opalescence caused by phase separation was observed in the nucleation heat treated glass (16.3% $Li_2O$-83.7% $SiO_2$). The result from nucleation density measurement of this glass indicated that the nucleation was enhanced during early stage of phase separation. The molphologies of crystals in glasses and crystal growth rate at $600^{\circ}C$ were also discussed.

• Journal of Magnetics
• /
• 제22권2호
• /
• pp.169-174
• /
• 2017

In this work, lithium ferrite ($Li_{0.5}Fe_{2.5}O_4$) nanoparticles were prepared via mechanochemical processing and subsequent heat treatment at a relatively low ($600^{\circ}C$) calcining temperature. The raw materials used were high purity $Fe_2O_3$ and $Li_2CO_3$ that were milled for between 2 and 20 h. The milled powders were then calcined at temperatures of 500 and $600^{\circ}C$ for 5 h in air. XRD results show that optimum conditions to obtain single phase lithium ferrite nanoparticles with a mean crystallite size of about 23 nm, using Scherrer's formula, are 10 h milling and calcination at $600^{\circ}C$. Saturation magnetization and coercivity of the single phase Li ferrite nanoparticles are 44.6 emu/g and 100 Oe respectively, which are both smaller than those of the bulk Li ferrite. The Curie temperature of the single sample was determined by a Faraday balance, which is $578^{\circ}C$ and smaller than that of bulk Li ferrite.

• Nuclear Engineering and Technology
• /
• 제4권3호
• /
• pp.214-222
• /
• 1972

광학급 LiF단결정의 열형광유선은 r선조사선양이 증가함에 따라서 변화한다. 즉 선량이 적을 때는 2개의 glow peak를 가지나, 선양이 정차 증가하여 10$_{5}$ rontgen 정도에 이르면 5개의 glow peak를 나타낸다. 이들 glow peak에 대응하는 energy 준위 Ei(i=1,2,3,4, 및 5)는 전도대 밑으로 부터의 깊이로 표시할 때 다음과 같은 값을 갖는다. 이들 E$_i{$의 값은 가열속도 $\theta_1$=6.6$^{\circ}C$/sec와 $\theta_2$=3.4$^{\circ}C$/sec에 대한 glow peak의 온도를 얻은 다음, Randall-Wilkins의 이론에 따라서 계산되었다. 광학급 LiF단결정에서 E$_1$과 E$_2$이외의 전자 trap은 열적으로 불안정하며 LiF(Mg) 열형광선양계에 불가결한 것으로 되어있는 sensitization의 효과가 거의 없다. LiF(Mg)는 $\theta$=6.6$^{\circ}C$/sec 일때, 17$0^{\circ}C$와 23$0^{\circ}C$에 glow peak를 나타내며 이들에 대응하는 전자 trap E$_4$와 E$_{5}$ 이외에 방사선이 조사됨에 따라서 E$_1$, E$_2$, E$_3$ 및 E$_{6}$의 전자 trap이 형성되며 이들 값은 다음과 같다. LiF(Mg)에서 방사선상해 때문에 형성된 E$_1$, E$_2$, E$_3$및 E$_{6}$는 모두 상당히 열적으로 안정하며, sensitization과정에서 형성된다. 이 안정한 6준위계에서 LiF(Mg)예 의한 방사선 선양측정이 시행되어야 한다. E$_1$,E$_2$,E$_3$ 및 E$_{6}$의 안정성은 LiF결정내의 $Mg^{$ ++/ 불순물의 영향으로 사료된다. 광학급 LiF단결정의 열형광에서 r선양의 대수표시양과 전열형광양의 대수표시 사이에 비선형성을 나타낸다. 그러나 열적으로 안정한 12$0^{\circ}C$ glow peak만을 고려하여 r선양의 대수표시양과 12$0^{\circ}C$ slow peak의 높이의 대수표시량 사이에서 비선형성이 감소되어, LiF(Mg)에 대한 곡선과 매우 유사한 곡선을 얻게 된다.

• Bulletin of the Korean Chemical Society
• /
• 제33권2호
• /
• pp.608-612
• /
• 2012

We investigated the cycling behavior of $Li_4Ti_5O_{12}$ electrode in a cross-linked gel polymer electrolyte based on non-flammable ionic liquid consisting of 1-butyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl) imide and vinylene carbonate. The $Li_4Ti_5O_{12}$ electrodes in ionic liquid-based gel polymer electrolytes exhibited reversible cycling behavior with good capacity retention. Cycling data and electrochemical impedance spectroscopy analyses revealed that the optimum content of the cross-linking agent necessary to ensure both acceptable initial discharge capacity and good capacity retention was about 8 wt %.

• 한국세라믹학회지
• /
• 제31권6호
• /
• pp.660-670
• /
• 1994

Transparent, crack-free dried gel monoliths with a composition of LiZr1.5Si2P2O12.5 have been synthesized by the low temperature polymerization of the Sol-Gel technique using metal alkoxides as starting materials. After initial reaction (20~40 min), each metal alkoxide closely paralleled each other during the hydrolysis reactions. The safe drying conditions of gels with no creaks the control of the shrinkage rate. The gels converted into the glass by heat treatment at 75$0^{\circ}C$. FTIR data indicated that the gels were phase separated into silicarich and phosphate-rich regions with the lithium. XRD results showed the formation of crystalline LiH2PO4. The gels dried at 15$0^{\circ}C$ or fired at 75$0^{\circ}C$ contained the residual water. The high ionic conductivity at room temperature for these gels was attributed to the motion of protons.