• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.224-226
• /
• 1996

The purpose of this study is to research and develop $Li_xNi_{2-x}O_2$ cathode for lithium rechargeable battery. We investigated XRD, cyclic voltammetry, AC impedance response and charge/discharge cycling of $Li_xNi_{2-x}O_2$/Li cells. The cell resistance was decreased much at initial charge process from 100% SOC to 0% SOC. The discharge capacity based on $Li_xNi_{2-x}O_2$ of 1st and 15th cycles was 135mAh/g and 108mAh/g, respectively. The $Li_xNi_{2-x}O_2$/Li cell had a good properties.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.111.1-111
• /
• 2003

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.97.2-97
• /
• 2003

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.9
• /
• pp.702-710
• /
• 2012

Eco-friendly $(Na,K)NbO_3$ (NKN)-based piezoelectric ceramic materials were fabricated by conventional ceramic method for shear mode piezoelectric energy harvesting application. $NKN-LiTaO_3$ (LT) based compositions were adopted for the high $d_{15}{\times}g_{15}$ which is proportional to harvested energy density. The composition $0.935(Na_{0.535}K_{0.485})NbO_3-0.065LiTaO_3$ was found to be lie on the boundary of tetragonal and orthorhombic phases. With reducing Ta content, the dielectric constant decreased gradually while maintaining high $d_{15}$, which resulted in increased $d_{15}{\times}g_{15}$. The composition $0.935(Na_{0.535}K_{0.485})NbO_3-0.065Li(Nb_{0.990}Ta_{0.010})O_3$ was found to possess excellent piezoelectric and electromechanical properties ($d_{15}{\times}g_{15}=29\;pm^2/N$, $d_{15}$ = 417 pC/N, $k_{15}$ = 0.55), and high curie temperature ($T_c=455^{\circ}C$).

• Journal of Sensor Science and Technology
• /
• v.12 no.1
• /
• pp.1-9
• /
• 2003

CsI single crystals doped with lithium, potassium or rubidium were grown by using Czochralski method at Ar gas atmosphere. The energy resolutions of CsI(Li:0.2 mole%), CsI(K:0.5 mole%) and CsI(Rb:1.5 mole%) scintillators were 14.5%, 15.9% and 17.0% for $^{137}Cs$(0.662 MeV), respectively. The energy calibration curves of CsI(Li), CsI(K) and CsI(Rb) scintillators were linear for $\gamma$-ray energy. The time resolutions of CsI(Li:0.2 mole%), CsI(K:0.5 mole%) and CsI(Rb:1.5 mole%) scintillators measured by CFT(constant-fraction timing method) were 9.0 ns, 14.7 ns and 9.7 ns, respectively. The fluorescence decay times of CsI(Li:0.2 mole%) scintillator had a fast component and slow one of ${\tau}_1=41.2\;ns$ and ${\tau}_2=483\;ns$, respectively. The fluorescence decay times of CsI(K:0.5 mole%) scintillator were ${\tau}_1=47.2\;ns$ and ${\tau}_2=417\;ns$. And the fluorescence decay times of CsI(Rb:1.5 mole%) scintillator were ${\tau}_1=41.3\;ns$ and ${\tau}_2=553\;ns$. The phosphorescence decay times of CsI(Li:0.2 mole%), CsI(K:0.5 mole%) and CsI(Rb:1.5 mole%) scintillators were 0.51 s, 0.57 s and 0.56 s, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.1-6
• /
• 2020

UAV (Unmanned Aerial Vehicles) are used widely for military purposes because they are more economical than general manned aircraft and satellites, and have easy access to the object. Recently, owing to the development of IT technology, UAV equipped with various sensors have been released, and their use is increasing in a wide range of fields, such as surveying, agriculture, meteorological observation, communication, broadcasting, and sports. An increasing number of studies and attempts have made use of it. On the other hand, existing research was related mostly to photogrammetry, but there has been a lack of analytical research on LiDAR (Light Detection And Ranging). Therefore, this study examined the characteristics of a UAV LiDAR sensor for the application of a geospatial information field. In this study, the performance of commercialized LiDAR sensors, such as the acquisition speed and the number of echoes, was investigated, and data acquisition and analysis were conducted by selecting Surveyor Ultra and VX15 models with similar accuracy and data acquisition distances. As a result, a DSM of each study site was generated for each sensor, and the characteristics of data density, precision, and acquisition of ground data from vegetation areas were presented through comparison. In addition, the UAV LiDAR sensor showed an accuracy of 0.03m ~ 0.05m. Hence, it is necessary to select equipment considering the characteristics of data for effective use. In the future, the use of UAV LiDAR may be suggested if additional data can be obtained and analyzed for various areas, such as urban areas and forest areas.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.363-366
• /
• 2007

Road Design is being reached to the working design to produce drawings, calculate construction quantity and cost, through the basic design that contained feasibility study and all impact assessment. In general, to plan the route we use topographic map. The vertical positional accuracy is 30cm and horizontal positional accuracy is 35cm in 1:1,000 scale topographic map. In LiDAR, vertical positional accuracy is 15cm and horizontal positional accuracy is 30cm. So if we use LiDAR on road design, more accurate earth-volumn will be calculated when we plan the route. In this paper we try to find the method to use the LiDAR data on road design by drawing the profile and cross sectional view and comparing the earth-volumn to the road that working design is in process adopting the topographic map and LiDAR data.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.3
• /
• pp.120-123
• /
• 2005

The 5 mol% ZnO doped $LiNbO_3$ film and the 2 mol% MgO doped $LiNbO_3$ film were grown on the $LiNbO_3$ (001) substrate by liquid phase epitaxy (LPE) method with $Li_2CO_3-V_2O_5$ flux system. The crytsallinity and the lattice mismatch between $Zn:LiNbO_3$, film and $Mg:LiNbO_3$, film were analyzed by x-ray rocking curve (XRC). In addition, the ZnO and MgO distribution in the cross-section of the multilayer thin films was observed using electron probe micro analyzer (EPMA).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.1
• /
• pp.15-20
• /
• 2011

[ $^7Li$ ]Magic Angle Spinning (MAS) NMR spectroscopy has been used to study the lithium local environments in $Li_4P_2O_7$ and$LiFePO_4$ materials. The purpose of this study was to know the structure of the solid electrolyte interphase (SEI) in lithium ion cells composed of $LiFePO_4$ as cathode material. $Li_4P_2O_7$ and $LiFePO_4$ were prepared by a solid-state reaction. The $^7Li$ MAS NMR experiments were carried out at variable temperatures in order to observe the local structure changes at the temperatures in $Li_4P_2O_7$ system. The $^7Li$ MAS NMR spectra of in $Li_4P_2O_7$ indicate that the lithium local environments in $Li_4P_2O_7$ were not changed in the temperature range between $27^{\circ}C$ and $97^{\circ}C$ Through this work, we confirmed that the small amount of $Li_4P_2O_7$ less than 5.0 wt% in $LiFePO_4$ could be clearly measured by the $^7Li$ MAS NMR spectroscopy at high spinning rate over than 11 kHz.

• Experimental and Molecular Medicine
• /
• v.50 no.11
• /
• pp.11.1-11.12
• /
• 2018

USP15 has been shown to stabilize transcription factors, to be amplified in many cancers and to mediate cancer cell survival. However, the underlying mechanism by which USP15 regulates multiple myeloma (MM) cell proliferation and apoptosis has not been established. Here, our results showed that USP15 mRNA expression was upregulated in MM patients. USP15 silencing induced MM cell proliferation inhibition, apoptosis, and the expression of nuclear and cytoplasmic NF-${\kappa}Bp65$, while USP15 overexpression exhibited an inverse effect. Moreover, in vivo experiments indicated that USP15 silencing inhibited MM tumor growth and NF-${\kappa}Bp65$ expression. PDTC treatment significantly inhibited USP15 overexpression-induced cell proliferation, apoptosis inhibition, and NF-${\kappa}Bp65$ expression. USP15 overexpression promoted NF-${\kappa}Bp65$ expression through inhibition of its ubiquitination, whereas NF-${\kappa}Bp65$ promoted USP15 expression as a positive regulator. Taken together, the USP15-NF-${\kappa}Bp65$ loop is involved in MM tumorigenesis and may be a potential therapeutic target for MM.