• Korean Journal of Materials Research
• /
• v.6 no.9
• /
• pp.925-930
• /
• 1996

Zr이 0.03wt%함유된 Mg-8.14Li-3.93AI 합금의 시효거동을 미소경도와 미세조직의 변화, 열분석 등으로 조사하였다. Zr의 첨가로 인하여 3원계 Mg-8.23Li-4.02A에 비하여 조직이 미세화되었으며 모든 시효조건에서 경도값이 높게 나타났다. 열분석결과 발열피크는 준안정 석출상인 MgLi2AI($\theta$)의 석출과 $\theta$상에서 안정상인 AILi으로의 변화와 관련된 것이고, 흡열피크는 $\theta$와 AILi상의 재용해에 대응되는 것으로 판단되었다. 피크 경도값(103Hv)은 $\theta$의 석출이 완료되는 393K에서 0.5시간 시효시 나타났으며 피크 경도조건에서의 미세조건은 $\beta$기지에 $\theta$와 AILi상이 공존하고 있음을 투과식 전자현미경으로 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.11
• /
• pp.3224-3226
• /
• 2014

A new androstane derivative, $4{\beta}$-methyl-15-oxa-$14{\beta}$-androstane-7-ene-$4{\alpha}$-carboxylic acid (1) and a known one $4{\beta}$-methyl-15-oxa-$14{\beta}$-androstane-7-ene-$4{\alpha}$-hydroxyl (2) were isolated from the EtOAc extract of the cultures of the fungus Marasmiellus ramealis (Bull.) Singer. Their structures were elucidated on the basis of 1D and 2D NMR as well as MS spectroscopic data analysis. The inhibitory activity of two isolates against acetylcholinesterase (AChE) revealed that compound 1 exhibited definitely inhibitory activity.

• Korean Journal of Optics and Photonics
• /
• v.14 no.1
• /
• pp.38-43
• /
• 2003

Fabrication process of strain-induced channel waveguides in $LiNbO_3$ was developed using strain-optic effect and compressional strain due to ~1.4 $\mu\textrm{m}$ surface Mo/Pt metal film. Characterization of the channel waveguides revealed a single transverse and depth mode in both TE and TM polarizations. Measurements showed total insertion loss of 6.2 and 7.7 ㏈/cm for TM and TE polarizations. respectively. Electro-optic intensity modulators with 11 mm long electrode length and 21 $\mu\textrm{m}$ electrode gap at $\lambda$ = 1.15 ${\mu}{\textrm}{m}$have been produced in $LiNbO_3$ substrates using strain-induced channel waveguides. Modulation depth of 100% at $\pi$-radian voltage of 16.1V has been demonstrated. Also, 1$\times$2 on/off power splitters at $\lambda$ = 0.63 $\mu\textrm{m}$ have been produced using strain-induced channel waveguides. On/off voltage of $\pm$ 25V has been demonstrated.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.1
• /
• pp.29-35
• /
• 2016

We have demonstrated a $Ti:LiNbO_3$ electro-optic electric-field sensors utilizing a $1{\times}2$ Y-fed balanced-bridge Mach-Zehnder interferometric (YBB-MZI) modulator which uses a 3-dB directional coupler at the output and dipole patch antenna. The operation and design were proved by the BPM simulation. A dc switching voltage of ~16.6 V and an extinction ratio of ~14.7 dB are observed at a wavelength of $1.3{\mu}m$. For a 20 dBm rf power, the minimum detectable electric-fields are ~1.12 V/m and ~3.3 V/m corresponding to a dynamic range of about ~22 dB and ~18 dB at frequencies 10 MHz and 50 MHz, respectively. The sensors exhibit almost linear response for the applied electric-field intensity from 0.29 V/m to 29.8 V/m.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.2
• /
• pp.39-44
• /
• 2022

This paper presents LiDAR static obstacle map based vehicle position correction algorithm for urban autonomous driving. Real Time Kinematic (RTK) GPS is commonly used in highway automated vehicle systems. For urban automated vehicle systems, RTK GPS have some trouble in shaded area. Therefore, this paper represents a method to estimate the position of the host vehicle using AVM camera, front camera, LiDAR and low-cost GPS based on Extended Kalman Filter (EKF). Static obstacle map (STOM) is constructed only with static object based on Bayesian rule. To run the algorithm, HD map and Static obstacle reference map (STORM) must be prepared in advance. STORM is constructed by accumulating and voxelizing the static obstacle map (STOM). The algorithm consists of three main process. The first process is to acquire sensor data from low-cost GPS, AVM camera, front camera, and LiDAR. Second, low-cost GPS data is used to define initial point. Third, AVM camera, front camera, LiDAR point cloud matching to HD map and STORM is conducted using Normal Distribution Transformation (NDT) method. Third, position of the host vehicle position is corrected based on the Extended Kalman Filter (EKF).The proposed algorithm is implemented in the Linux Robot Operating System (ROS) environment and showed better performance than only lane-detection algorithm. It is expected to be more robust and accurate than raw lidar point cloud matching algorithm in autonomous driving.

• Korean Journal of Acupuncture
• /
• v.26 no.4
• /
• pp.23-38
• /
• 2009

Objectives : The purpose of this study was to identify the effect of the tonification & sedation manipulation for LI4 and KI7 on lacking of sweating in cold environment. Methods: The participants were divided into 3 groups as intact group without acupuncture, acupuncture group inserting and twisting with LI4 tonificaton and KI7 sedation method(LI4-tonify KI7-purge) and acupuncture group inserting and twisting with LI4 sedation and KI7 tonificaton method(LI4-purge KI7-tonify). We obtained baseline data at cold condition with the temperature $14{\pm}1^{\circ}C$. After making the participant staying in cold condition for 10 minute, we measured sweating rate in skin surface, body temperature, oxygen saturation, pulse rate, systolic blood pressure, diastolic blood pressure, deoxy-Hb and oxy-Hb in subcutaneous. Results : After acupuncture in cold environment, the sweating rate in skin surface significantly decreased in KI7-purge LI4-tonify group comparing the intact groups. The body temperature significantly increased in LI4-tonify KI7-purge and LI4-purge KI7-tonify groups comparing the intact group. The oxygen saturation significantly increased in LI4-tonify KI7-purge group comparing the intact group. Conclusions : These findings indicated that LI4 tonificaton and KI7 sedation method(LI4-tonify KI7-purge) could be effective for production of sweating in cold condition.

• Journal of the Korean Ceramic Society
• /
• v.39 no.9
• /
• pp.890-895
• /
• 2002

Effect of the sintering time on the microwave dielectric properties of the layered Functionally Graded Materials(FGMs) of the Mg0.93Ca0.07TiO3(MCT) with (Ca0.3Li0.14Sm0.42)TiO3(CLST) ceramics was investigated. The dielectric constant of layered FGMs specimens showed a nearly constant value and did not change significantly with sintering time. The quality factor, however, was affected by the relative density and thermal stress developed in each dielectric layer. With an increase of the relative density and the decrease of the induced thermal stresses, quality factor of the layered FGMs specimens increased and the quality factor was incluenced sensitively by the change of compressive stress developed in MCT layers which had a lower thermal expansion coefficient than that of CLST. For the layered FGMs specimen sintered at 1300$^{\circ}C$ for 9h, the compressive stress developed in MCT layer showed the maximum value, which, in turn, the quality factor of the specimen was the minimum value.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.12
• /
• pp.1078-1083
• /
• 2002

The objectives of this paper are to measure the concentration of $H_2$O/LiBr solution by measuring the electrical conductivity and to study the effect of the solution temperature and the concentration on the electrical conductivity of the solution. The solution temperature ranges $20^{\circ},\;40^{\circ},\;and\; 60^{\circ}$ for a fixed concentration during the experiment. The valid ranges of the concentration are two regions, low concentration region (1~20% of LiBr) and high concentration region (55~66% of LiBr). The results show that the conductivity of the solution increases linearly with increasing the solution temperature while it increases without creasing the concentration lower than about 35% of LiBr and decreases with increasing the concentration higher than 35%. This paper proposes experimental correlations for the concentration as functions of the solution temperature and the concentration with error band of $\pm7$% for the low concentration region and $\pm1$% for the high concentration region, respectively. The experimental correlation can be practically used in the on-line measurement without any sampling of solution from the closed system.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.6
• /
• pp.320-323
• /
• 2014

Ga-doped $LiFePO_4$ cathode materials were synthesized using a hydrothermal method. The microstructural characteristics and electrochemical performances were systematically investigated using field emission scanning electron microscopy, high-resolution X-ray diffraction, energy dispersive X-ray spectroscopy, charge-discharge cycling, cyclic voltammetry, and electrochemical impedance spectroscopy. Among the as-prepared samples, $LiFe_{0.96}Ga_{0.04}PO_4$ demonstrates the best electrochemical properties in terms of discharge capacity, electrochemical reversibility, and cycling performance with an initial discharge capacity of $125mAh\;g^{-1}$ and high lithium ion diffusion coefficient of $1.38{\times}10^{-14}cm^2s^{-1}$ (whereas for $LiFePO_4$, these were $113mAh\;g^{-1}$ and $8.09{\times}10^{-15}cm^2\;s^{-1}$, respectively). The improved electrochemical performance can be attributed to the facilitation of Li+ ion effective diffusion induced by $Ga^{3+}$ substitution.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.8
• /
• pp.652-657
• /
• 2001

Vanadate glasses containing 10~20mol% glass former, P$_2$O$_{5}$ were prepared by melting the batch in platinum crucible and quenching on the copper plate. Li$_2$O-P$_2$O$_{5}$-V$_2$O$_{5}$ glass-ceramics having LiV$_3$O$_{8}$ were obtained by heat-treatment of this glass in crystallization temperature. The glass-ceramics showed singnificantly good capacity and long cycles life according to heating condition. In this paper, we described electrochemical properties during crystallization process and found the best crystallizaton condition of Li$_2$O-P$_2$O$_{5}$-V$_2$O$_{5}$ glass as cathode material. Li$_2$O-P$_2$O$_{5}$-V$_2$O$_{5}$ glass-ceramics heat-treated at 233$^{\circ}C$ for 3 hors showed good rechargeable capacity of 220mAh/g in the cycling range between 2.0 and 3.9V.en 2.0 and 3.9V.