• 제목/요약/키워드: LI14

검색결과 1,434건 처리시간 0.029초

Mn2O3가 LiNiBi Ferrite의 물리적 특성에 미치는 영향 (Physical Properties of Polycrystalline Mn2O3-Substituted LiNiBi Ferrite)

  • 고재귀
    • 한국재료학회지
    • /
    • 제14권9호
    • /
    • pp.655-658
    • /
    • 2004
  • Lithium ferrites are a low-cost material which have been prominent in the high frequency core industry because of their excellent temperature performance and high squareness ratio. In order to develope the lithium ferrites with the high squareness and low coercive force, the ferrites of $Li_{0.48}Bi_{0.02}Ni_{0.04}Fe_{2.46-x}O_4$ were investigated the by varying composition, temperature and frequency. Electric loss of the Li-ferrite was lowered with the substitution of $Mn_{2}O_3$. The addition of $Mn_{2}O_3$ increased the magnetic induction (Bm&Br) but decreased the coercive force (Hc) and the squareness ratio (R=Br/Bm). Also, the Br value was stable at environmental temperature variation.

LiMn2O4/C 복합 양극을 이용한 비수계 슈퍼커패시터의 제조 (The Preparation of Non-aqueous Supercapacitors with LiMn2O4/C Composite Positive Electrodes)

  • 김경호;유지영;김민수;여태환
    • Korean Chemical Engineering Research
    • /
    • 제45권2호
    • /
    • pp.178-182
    • /
    • 2007
  • $LiMn_2O_4$와 활성탄을 양극의 활물질로 사용하여 비수계 슈퍼커패시터를 제조하고 $LiMn_2O_4$의 함량에 따른 특성을 분석하였다. Cyclic voltammetry, AC impedance 분석 등을 통하여, 활성탄의 전기 이중층으로 인한 capacitive 효과에 $Li^+$ 이온의 intercalation/deintercalation에 의한 faradaic 효과가 더해진 pseudocapacitance의 발현을 확인할 수 있었으며, $LiMn_2O_4$의 함량이 증가할수록 비정전용량 및 에너지 밀도가 증가하는 것을 확인할 수 있었다. $LiMn_2O_4:C$의 비율이 0.86:0.14인 복합 양극을 사용하여, 순수 활성탄 양극 대비 2배 이상인 23.83 F/cc의 비정전용량과 17.51 Wh/L의 에너지밀도를 얻을 수 있었다. 또한, 1,000회 충방전 후에도 60% 이상 향상된 비정전용량과 에너지 밀도를 얻을 수 있었다.

RF 모듈용 LTCC 소재 개발 (Development of LTCC Materials for RF Module)

  • 김용철;이경호
    • 마이크로전자및패키징학회지
    • /
    • 제10권2호
    • /
    • pp.13-17
    • /
    • 2003
  • 본 연구에서는 $ZnWO_4-LiF$계를 이용하여 RF모듈 구현을 위한 새로운 조성의 LTCC 소재를 개발하고자 하였다. 순수 $ZnWO_4$의 경우 98% 이상의 상대밀도를 얻기 위해서는 $1050^{\circ}C$이상의 소결온도가 필요하였고 소결체의 고주파유전특성은 유전율($\epsilon_r$) 15.5, 품질계수($Q{\times}f0$) 74000 GHz, 공진주파수 온도계수$(\tau_f)-70ppm/^{\circ}C$이었다. $ZnWO_4$에 LiF의 첨가는 상호 반응에 의해 $810^{\circ}C$ 부근에서 액상을 형성하였고 따라서 0.5에서 1.5 wt%의 LiF의 첨가로 $ZnWO_4$$820^{\circ}C$에서 치밀화를 얻을 수 있었다. 주어진 LiF의 첨가범위에서 소결 수축률은 LiF 량의 증가와 함께 증가하였다. LiF의 첨가는 LiF 자체의 낮은 유전율에 의해 유전율을 15.5에서 14.2∼15의 범위로 감소시켰으며 품질계수($Q{\times}f0$)도 LiF와 $ZnWO_4$의 반응 및 미세구조의 불균일화로 LiF의 첨가량의 증가와 함께 낮아지는 경향을 보였다.

  • PDF

LiF-${Li_2}O-{B_2}{O_3}-{P_2}{O_5}$계 유리고체전해질에 관한 연구 (Studies on LiF-${Li_2}O-{B_2}{O_3}-{P_2}{O_5}$ based Glassy Solid Electrolytes)

  • 박강석;강은태;김기원;한상목
    • 한국재료학회지
    • /
    • 제3권6호
    • /
    • pp.614-623
    • /
    • 1993
  • 높은 알칼리량을 함유하는 LiF-$Li_{2}O-B_{2}O_{3}-P_{2}O_5$계 유리의 전기적 특성을 분석하였다. $Li_{+}$ 이온은 모두 전기전도에 기여하지 않으나 조성에 따른 전기전도도의 변동은 약전해질 모델을 따르지 않았다. 또한 이동이온의 농도를 구하는데 사용되는 승법칙(power law)의 적용이 가능하지 않았다. 이들 계에서 조성에 따른 전기전도도의 변동은 유리내에서의 이동 가능한 $Li^{+}$이온의 농도변화만으로 또는 이동도의 변화만으로는 설명할 수 없었다. 전도도의 향상은 $(B-O-P)^{o}$ 보다 $Li^{+}$이온의 확산에 부가적인 자리를 제공하는$(B-O-P)^-,di^-$, 및 metaborate가 형성된 것과 관련이 있었다. 전기전도성이 가장 좋은 조성의 $150^{\circ}C$에서의 전기전도도는 $2.43 \times 10^{-4}$S/cm였고 분해포텐샬은 5.94V, emf는 3.14V였고 에너지 밀도는 22Wh/Kg이었다.

  • PDF

PMMA 구를 주형으로 이용한 3DOM 전극 구조체의 제조 (Fabrication of Three-dimensionally Ordered Macroporous Electrode Materials by Using PMMA Template)

  • 서경수;정하균;손용근
    • 한국재료학회지
    • /
    • 제14권8호
    • /
    • pp.587-594
    • /
    • 2004
  • Three-dimensionally ordered macroporous (3DOM) structures of the $LiCoO_2$ electrode materials for Li secondary batteries were fabricated by using the close-packed arrays of PMMA spheres served as templates. In order to successfully fabricate the cathode materials with highly ordered array form, the metal citrates were applied to new precursors. The precursor/template composites were prepared by the infiltration with metal citrate precursors into the voids of template. By removing the PMMA templates, then, the inverse opal structures with the uniform pores of narrow size distribution were resulted. It was confirmed that the 3DOM $LiCoO_2$ material is to take a single phase of rocksalt (R3m) structure. In addition, 3DOM $LiNiO_2$ and $LiMn_{2}O_4$ cathode materials were fabricated using an identical preparation procedure. Also, the morphology of the 3DOM cathode materials calcined at $500^{\circ}C\;to\;700^{\circ}C$ was observed by scanning electron microscope.

Synthesis of Lithium Titanate Whisker Using Ion-Exchange of Acid Treatment

  • Um Myeong-Heon;Lee Jin-Sik
    • 한국재료학회지
    • /
    • 제14권9호
    • /
    • pp.627-633
    • /
    • 2004
  • Lithium titanate whiske($Li_{x}Ti_{4}O_9$) was prepared by an ion-exchange reaction. To this end, the initial material, potassium tetratitanate ($K_{2}Ti_{4}O_9{\cdot}nH_{2}O$) was prepared by calcination of a mixture of $K_{2}CO_3\;and\;TiO_2$ with a molar ratio of 2.8 at $1050^{\circ}C$ for 3 h, followed by boiling water treatment of the calcined products for 10 h. Fibrous potassium tetratitanate could be transformed into layered hydrous titanium dioxide ($H_{2}Ti_{4}O_9{\cdot}nH_{2}O$) through an exchange of $K^{+}\;with\;H^{+}$ using 0.075 M HCl. Also, lithium titanate whisker was finally prepared as $Li^{+}\;and\;H^{+}$ ions were exchanged by adding 20 mL of a mixture solution of LiOH and $LiNO_3$ to 1g whisker and stirring for $5\~15$ days. The average length and diameter of the $Li_{x}Ti_{4}O_9$ whiskers were $10\~20{\mu}m\;and\;1\~3{\mu}m$, respectively.

고효율 방사성이산화탄소 흡착제 개발 (Development of Adsorbent for Radioactive Carbon Dioxide)

  • 지준화;강덕원;이재의;한재욱
    • 한국방사성폐기물학회:학술대회논문집
    • /
    • 한국방사성폐기물학회 2003년도 가을 학술논문집
    • /
    • pp.158-161
    • /
    • 2003
  • 중수로형 원전의 감속재 상층기체에 포함되어 원전 주변 대기로 방출되는 방사성이산화탄소$(^14CO_2)$를 효과적으로 흡착하여 분리, 고정할 수 있는 고효율 흡착제를 개발하기 위해, 활성탄 및 활성탄섬유에 금속수산화물(LiOH)을 담지한 몇 가지의 흡착제를 대상으로 XRD, BET, SEM/EDX 분석을 수행하였으며, 이산화탄소 흡착 성능을 시험하였다. 성능 시험 결과, 활성탄과 LiOH를 물리적으로 혼합한 시료가 함침법으로 LiOH를 활성탄에 담지한 시료에 비해 흡착 성능이 우수함을 알 수 있었으며, 활성탄의 표면을 개질한 결과 1N 질산으로 처리하였을 때에도 흡착성능이 향상됨을 확인하였다.

  • PDF

[Li,La]TiO3 코팅용액의 pH에 따른 Li[Ni0.35Co0.3Mn0.35]O2 양극의 전기화학적 특성 (PH Effect of [Li,La]TiO3 Coating Solution on Electrochemical Property of Li[Ni0.35Co0.3Mn0.35]O2 Cathode)

  • 정광희;김석범;박용준
    • 전기화학회지
    • /
    • 제14권2호
    • /
    • pp.77-82
    • /
    • 2011
  • [Li,La]$TiO_3$ 코팅용액의 pH를 조절하여 이에 따른 코팅된 $Li[Ni_{0.35}Co_{0.3}Mn_{0.35}]O_2$ 양극활물질의 전기화학적 특성을 관찰하였다. 산화물인 양극분말은 접촉하고 있는 용액의 pH에 따라 표면 전하를 띄게 되는데 양이온인 코팅물질을 균일하게 반응시키기 위해서는 적절한 pH 조절을 통해 양극분말 표면을 음전하 상태로 조절해 주는 것이 필요하다. SEM, TEM 분석을 통해 코팅용액의 pH에 따른 코팅층의 형상변화를 관찰하였으며 다양한 전류밀도로 충전과 방전을 실시하여 코팅용액의 pH에 따른 방전용량, 사이클 특성, 고율특성을 분석하였다. 임피던스잴 cyclic voltammogram 측정을 통해 코팅용액의 pH에 따른 코팅층의 내부저항 변화를 관찰하였으며 이것을 전기화학적 특성과 연관됨을 확인하였다.

요골신경마비의 한의학적 치료에 대한 연구 고찰 (Review of the Studies on Korean Medicine Treatment of Radial Nerve Palsy)

  • 현재철;정수현
    • 척추신경추나의학회지
    • /
    • 제14권2호
    • /
    • pp.43-54
    • /
    • 2019
  • Objectives : The purpose of this study was to assess the use of Korean medicine for treating radial nerve palsy. Methods : We searched for studies on the use of Korean medicine for the treatment of radial nerve palsy in 7 electronic databases and analyzed these studies. Results : We found 95 studies on radial nerve palsy from 7 electronic databases. We excluded 77 duplicate studies, 1 review article and 2 studies published before 2000. As a result, 15 case studies(36 patients) were included. Acupuncture(15 times), electroacupuncture(6 times), pharmacopuncture(9 times), herbal medicine(11 times), physical therapy(10 times), moxibustion(3 times), cupping therapy(1 time), chuna manual therapy(1 time) and yinyang balancing appliance(1 time) were used. LI11 for acupuncture, LI4, LI11 for electroacupuncture, bee venom as pharmacopuncture material and LI4, LI10, LI11 in pharmacopuncture point, Boik-tang gami as herbal medicine, hot pack for physical therapy, LI4, LI11 for moxibustion were the most frequently used. Conclusions : Korean medicine treatment for radial nerve palsy has been performed in various ways. However, we found limited evidence regarding Korean medicine for radial nerve palsy. Thus, we think various types of studies including more case reports, for radial nerve palsy should be performed in the future.

지상 LiDAR를 이용한 토석류 발생량 산정에 관한 기초연구 (A Study on Estimation of Amount of Debris-Flow using Terrestrial LiDAR)

  • 전계원;전병희;안광국;장창덕;김남균
    • 한국지반환경공학회 논문집
    • /
    • 제11권3호
    • /
    • pp.63-68
    • /
    • 2010
  • 본 연구에서는 지상 LiDAR(Light Detection And Ranging) 스캔자료를 이용하여 토석류 재해 발생지역에 대한 토석류 발생량을 산정하고자 하였다. 충북 제천시를 연구대상지역으로 선정하여, 1:5000 수치지도를 이용한 DEM(수치표고모형)자료와 LiDAR 측량자료를 이용한 수치표고모형자료를 비교분석 하고 토석류 발생량을 산정하였다. 연구결과 침식량은 $24,150m^3$, 퇴적량은 $14,296m^3$로 산정되었고, 수로형 토석류와 사면형 토석류의 형태, 만곡부에서의 퇴적 등이 적절히 표현되었다. 토석류 발생량의 산정연구는 토석류 재해저감이나 대책수립 및 수치모의에 유용한 기초자료로 활용 될 것이다.