• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.57 no.1
• /
• pp.23-31
• /
• 2024

This study evaluated the utilization of a low fish meal (LFM) diet and black soldier fly (BSF) Hermetia illucens meal and oil as a fish meal (FM) substitute or functional additive for juvenile olive flounder Paralichthys olivaceus at the Jeju fish farm. Two experimental diets replaced FM using animal (tankage, poultry byproduct and tuna byproduct meal) and plant (wheat gluten and soy protein concentrate) protein sources, containing 45% (FM45) and 35% (FM35) of FM, respectively. One experimental diet replaced FM with animal, plant, and BSF meal, fish oil using insect meal and oil (FM35+). After the feeding trial ended, no differences in growth performance, feed utilization, survival and biological indices were observed among all experimental groups. Aspartate aminotransferase and cholesterol levels in the FM35 and FM35+ groups were significantly higher than that in the FM70 group. The linoleic acid level in the muscle was significantly higher in the fish fed with the FM70 diet than in those fed with the FM45, FM35, and FM35+ diets. Thus, the LFM diet is suitable for juvenile olive flounder farming during six months.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1993.06a
• /
• pp.195-198
• /
• 1993

해수의 물리적 성질 변화에 의한 수중음속 변화는 수중음파 전파에 커다란 영향을 미친다. 매질변동에 의한 음파 전파경로 변동특성, 즉 음파 도달시간 변동에 의한 매질변위량 추정으로 해양을 탐사하는“해양음향 토모그라피”를 운용하기 위하여 비균질 매질에서의 음파 전파경로 파악이 우선이다. 수심이 일정한 비균질한 매질에서의 음파 전파경로를 파악하기 위해 파동방정식의 해를 Ray theory에 의거 ray path를 구하고 송,수신기 사이를 연결하는 eigenray 정보를 얻었다. 음원의 주파수가 400Hz($\pm$25Hz), pulse length가 20ms인 LFM pulse를 사용하였다. 이 음원을 동해의 최소음속층에서 송,수신하였을 경우 음원에서 150Km 떨어진 수신기에 도달한 신호는 평균음속분포 일 때 보다 약 66ms 정도 빨리 도착한다. 또한 Eigenray 정보에 의거 모의된 수신신호는 토모그라피 운용을 위한 필수 조건인 ray path의 식별, 안정성, 그리고 분해능을 만족한다. 또한 모의 수신신호 음파 도달시간 변동 분석으로 송,수신기 사이의 매질 변동을 파악 할 수 있다.

• Tribology and Lubricants
• /
• v.19 no.2
• /
• pp.109-115
• /
• 2003

Nanotribological characteristics between a Si$_3$N$_4$ AFM tip and hydrophobic thin films were experimentally studied. Tests were performed to measure the nano adhesion and friction in both AFM (atomic force microscope) and LFM (lateral force microscope) modes in various .ranges of normal load. Plasma-modified thin polymeric films were deposited on Si-wafer (100). Results showed that wetting angle of plasma-modified thin polymeric film increased with the treating time, which resulted in the hydrophobic surface and the decrease of adhesion and friction. Nanotribological characteristics of these surfaces were compared with those of other hydrophobic surfaces, such as DLC, OTS and IBAD-Ag coated surfaces. Those of OTS coated surface were superior to those of others, though wetting angle of plasma-modified thin polymeric film is higher.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.236-239
• /
• 1999

Target signal feature parameters are very important to classify target by active sonar. Two highly correlated broadband pulses separated by time T have a time separation pitch (TSP) of 1/THz, equal to the spacing between ripples of its spectrum. In this study, TSP is applied to scaled-target echoes to be used as a feature parameter. The TSP from the target sign리 when source signals are CW short, CW long, and LFM long was investigated. It is also found the TSP can be applied to the target signal with doppler shift. It is shown that the position and magnitude of highlight can be found for LSEM based on TSP.

• Tribology and Lubricants
• /
• v.17 no.3
• /
• pp.191-197
• /
• 2001

Nano adhesion and friction characteristics between SPM(scanning electron microscope) tips and flat plates of different materials were experimentally studied. Tests were performed to measure adhesion and friction in AFM(atomic force microscope) and LFM(lateral force microscope) modes in different conditions of relative humidity. Three different Si$_3$N$_4$ tips (rdaii : 15nm, 22nm and 50 nm) and three different flat plates of Si-wafer(100), W-DLC(tungsten-incorporated diamond-like carbon) and DLC were used. Results generally showed that adhesion and friction increased with the tip radius, and W-DLC and DLC surfaces were superior to Si-wafer. But the adhesion force of Si-wafer showed non linearity with the tip radius while W-DLC and DLC surfaces showed good correlation to the “JKR model”. It was found that high adhesion force between Si-wafer and a large radius of tip was caused by a capillary action due to the condensed water.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.364-365
• /
• 2005

This paper report nanotribological behavior between Si tip and Cu wafer surfaces which was treated various concentration of $H_2O_2$. This experimental approach has proven atomic level insight into Cu CMP. It has been used to study interfacial friction and adhesion force between Si tip and Cu wafer surfaces in air by atomic force microscopy (AFM). Adhesion force of Cu surfaces which was pre-cleaned in diluted HF solution was lager than Cu oxide surfaces. Adhesion force of Cu oxide surface was saturated around 7 nN. Slope of normal force vs lateral signal was increased as increasing concentration of $H_2O_2$ and it was saturated around 24. Friction force of Cu oxide was lager than Cu.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.536-536
• /
• 2012

나노와이어는 센서, 메모리소자, 태양전지등과 같은 다양한 소자로 응용이 되고 있다. Bottom-up 방법으로 길러진 나노와이어들을 금속전극 위에 정렬 및 접합시킬 때, 나노와이어와 금속전극간의 기계적 접합강도와 안정적인 전기적 특성이 매우 중요하다. 본 연구에서는 열압착 공정과 솔더전극(Cr/Au/In/Au, Cr/Cu/In/Au)을 사용함으로써, 나노와이어를 금속전극에 압입시켜 강한 기계적 접합강도와 안정적인 전기적 특성을 얻을 수 있는 공정을 제안하였다. 나노와이어와 금속 전극간의 접합부 분석을 위해 scanning electron microscopy (SEM)와 transmission electron microscopy (TEM)을 이용하였으며, 기계적 특성은 lateral force microscopy (LFM), 전기적 특성은 semiconductor analyzer (Keithley 4200-SCS)를 사용하여 측정하였다. 접합강도 측정결과 lateral force가 나노와이어에 가해질 때 나노와이어가 파괴되는 힘에서도 나노와이어와 금속전극간의 접합부파괴가 일어나지 않았다. 또한 나노와이어와 금속전극간의 전기적 접촉특성은 안정적인 ohmic contact을 이루었다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.06a
• /
• pp.127-134
• /
• 2001

Nano adhesion and friction between a Sj$_3$N$_4$ AFM tip and thin silver films were experimentally studied. Tests were performed to measure the nano adhesion and friction in both AFM(atomic force microscope) and LFM(lateral force microscope) modes in various ranges of normal load. Thin silver films deposited by IBAD (ion beam assisted deposition) on Si-wafer (100) and Si-wafer of different surface roughness were used. Results showed that nano adhesion and friction decreased as the surface roughness increased. When the Si surfaces were coated by pure silver, the adhesion and friction decreased. But the adhesion and friction were not affected by the thickness of IBAD silver coating. As the normal force increased, the adhesion forces of bare Si-wafer and IBAD silver coating film remained constant, but the friction forces increased linearly. Test results suggested that the friction was mainly governed by the adhesion as long as the normal load was low.

• Tribology and Lubricants
• /
• v.17 no.4
• /
• pp.276-282
• /
• 2001

Nano adhesion between SPM (scanning probe microscope) tips and 075 (octadecyltrichlorosilane) SAM (self-assembled monolayer) was experimentally studied. Tests were performed to measure the nano adhesion and friction in both AFM(atomic force microscope) and LFM(lateral force microscope) modes in various conditions of relative humidity. OTS SAM was formed on Si-wafer (100) surfaces, and Si$_3$N$_4$ tips of different radius of curvature were used. When the surface was hydrophobic, the adhesion and friction forces were found lower than those of bare Si-wafer. Results also showed that micro-adhesion force increased as the relative humidity and the tip radius of curvature increased. The main parameter for affecting the micro-adhesion was found absorbed humidity on the contact surface. These results were discussed with the JKR model and a capillary force caused by absorbed water.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.1
• /
• pp.143-148
• /
• 2002

We investigated the cytotoxicity effects of Lycii fructus (LF) on HePG2, MCF7 and C6 cell lines by the MTT assay. We extracted the methanol (LFM) and fractionated to five partition layers. Among partition layers, the ethylether partition layer (LFMEE) was showed the strongest cytotoxic effects on all cancer cell lines. The hexane partition layer (LFMH) also was showed significant cytotoxic activities on Hela and MCF-7 cell lines. We also determined the induction of intracellular quinone reductase (QR) activity on HepG2 cells. Among various partition layers of Lycii fructus; LFMH was showed the most effective such induced effect such as 1.85 to the control value of 1.0. And we also determined the enhancement of anticarcinogenic effect by combination of Lycii fructus with vitamin C on all cell lines. These results suggest that potentially useful anticarcinegenic chemicals could be isolated from LFMEE and LFMH of the Lycii frutus and also we found the enhanced effect by the combination of various partition layers of LFM with vitamin C.