• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.295-298
• /
• 2007

The effectiveness of passive control techniques for reducing the pressure oscillation generated in a supersonic cavity flow was investigated numerically and experimentally, respectively. The control device includes a sub-cavity installed in the upstream edge of a rectangular cavity. Time-dependent supersonic cavity flow characteristics with turbulent features were examined by using the three-dimensional, mass-averaged Navier-Stokes computation based on a finite volume scheme and large eddy simulation. The results show that the pressure oscillation near the trailing edge dominates overall time-dependent cavity pressure variations. Such an oscillation can be attenuated more significantly in the presence of the sub-cavity compared with the cavity without sub-cavity, and a larger sub-cavity leads to better control performance.

• Wind and Structures
• /
• v.30 no.4
• /
• pp.339-366
• /
• 2020

This study aims at modeling boundary layers (BLs) encountered in sparse and built environments (i.e. open, suburban and urban) at the subsonic Wind Tunnel (WT) at Ryerson University (RU). This WT has an insignificant turbulence intensity and requires a flow-conditioning system consisting of turbulence generating elements (i.e., spires, roughness blocks, barriers) to achieve proper turbulent characteristics. This system was developed and validated in the current study in three phases. In phase I, several Computational Fluid Dynamic (CFD) simulations of the tunnel with generating elements were conducted to understand the effect of each element on the flow. This led to a preliminary design of the system, in which horizontal barriers (slats) are added to the spires to introduce turbulence at higher levels of the tunnel. This design was revisited in phase II, to specify slat dimensions leading to target BLs encountered by tall buildings. It was found that rougher BLs require deeper slats and, therefore, two-layer slats (one fixed and one movable) were implemented to provide the required range of slat depth to model most BLs. This system only involves slat movement to change the BL, which is very useful for automatic wind tunnel testing of tall buildings. The system was validated in phase III by conducting experimental wind tunnel testingof the system and comparing the resulting flow field with the target BL fields considering two length scales typically used for wind tunnel testing. A very good match was obtained for all wind field characteristics which confirms accuracy of the system.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.3
• /
• pp.193-204
• /
• 2011

To develop more robust oil boom which is vulnerable to various failure mode under severe weather condition, highly accurate wave model is developed using Spatially filtered Navier-Stokes Eq., LDS (Lagrangian Dynamic Smagorinsky model) for residual stresses, SPH (Smoothed Particle Hydrodynamics). To clarify the hydraulic characteristics of floating type oil boom, we numerically simulate the behavior of oil spill around oil boom under very energetic progressive waves. At the first stage, we firmly anchored the oil boom, and then, allowed the excursion of the oil boom. It turns out that oil boom with skirt of enough length (longer than 30% of depth) effectively confines the oil spill even against very energetic waves. We can also observe obliquely descending vertical eddies between y = 1~2 m as horizontal vortices shedding at the interface of oil spill and water are diffused toward the bottom, which is believed to be the birth, growing and break-down of Kelvin-Helmholz wave.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.558-558
• /
• 2012

다수의 자연 하천은 유사 이동과 하안의 침식으로 인하여 사행 하천이 발생한다. 사행 하천에서의 이차류는 원심력, 편수위로 발생하는 중력에 의한 압력차, 그리고 난류로 인하여 발생하는 응력으로 인하여 형성되며 나선형 구조 형태로 표면 유속은 외부로 향하고 하천 바닥의 유속은 안으로 향하게 된다. 이러한 2차류의 형성은 주 흐름의 특성을 변형시킨다. 자연하천에서 2차류는 주 흐름의 15-25%의 크기를 가지고 있으나, 하상의 변화, 유사의 이동 등과 연관되므로 2차류의 영향을 정확히 해석하는 것은 수리학적으로 매우 중요하다. 본 연구에서는 사행수로에서 발생하는 2차류 거동을 수치모의를 통하여 수행하였다. 우선 2차류의 분석을 위하여 실험을 통한 결과물을 비교하였다. 자연 하천의 특성을 반영할 수 있도록 서일원(2006)이 수행한 S-자 형태의 실험 수로의 실험 결과를 분석하였다. 수치 모의를 위하여 3차원 전산유체역학 프로그램을 사용하여 사행수로의 2차원 유속 구조를 모의할 수 있도록 하였다. FLOW-3D 프로그램을 이용하여 실험 결과와 모의 결과를 비교할 수 있도록 하였으며 비교 후 보정을 실시하였다. 모의는 주로 LES (Large Eddy Simulation) 모형을 통해 이루어졌으며, 이를 통하여 실험에서 획득한 결과와 비슷한 유속구조 분포를 확인할 수 있었다. 보정 및 검증 후 수치 모의를 통한 유속 데이터를 이용하여 민감도 분석을 실행하였다. 이후로는 수로의 만곡부, 조도, 수심 등 인공수로의 조건을 변경하여 수치 모의를 수행하였다. 보정된 결과를 이용하여 추가적인 모의를 통한 유속 분포 구조의 비교가 이루어졌다. 이를 통하여 각 조건이 이차류의 크기에 미치는 영향을 확인할 수 있었으며, 모의를 통한 유속분포 결과는 대체적으로 실험을 통한 이차류의 연직분포 구조와 일치하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.6
• /
• pp.713-722
• /
• 2022

In this paper, the flow performance and aero-acoustic noise generated by the target centrifugal fan system were investigated numerically and experimentally. Also, the numerical method for Computational Aero-Acoustics were evaluated by comparing each method. To analyze the performance of the centrifugal fan experimentally, the acoustic power level was measured in the semi-anechoic chamber using microphones, and the active frequency range for the noise performance was identified and that frequency range was applied for Computational Aero-Acoustics (CAA) techniques as sampling frequency. Then, Navier-Stokes equation and the Ffowcs Williams&Hawking equations were used to analyze the flow and sound power numerically, respectively, and a virtual acoustic radiation plane was designed and used for the implementation of the sound field. The accuracy and numerical characteristics of the numerical methods were validated by comparing simulated acoustic power levels with acoustic power levels measured.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.92-92
• /
• 2021

체외수정을 기반으로 이루어지는 성게의 수정 과정은 성게 주변에서 형성되는 복잡한 난류 흐름의 영향을 받게 된다. 성게 몸체의 하류부에 형성되는 재순환 영역 (recirculation zone) 내에는 다양한 난류 와류 흐름이 존재하며, 이들은 성게 몸체에서 방출된 정자와 난자의 충돌을 일으키고 수정 과정에 지대한 영향을 미친다. 즉, 성게의 수정 과정을 이해하기 위해서는 성게 주변의 흐름에 대한 유체역학적 관점에서의 분석이 수행되어야 한다. 본 연구의 목적은 성게 몸체에 의해 발생한 난류 흐름이 성게의 체외 수정에 미치는 영향에 대해 조사하는 것이다. 이를 위해 본 연구에서는 상용 프로그램인 오픈폼 (OpenFaom)을 활용하여 수치 모의를 수행하였다. 성게 주변의 유동장은 LES (Large Eddy Simulation)을 기반으로 모의하였고, 정자와 난자의 확산 궤적은 라그랑지안 입자 추적 (Lagrangian Particle Tracking) 알고리즘을 통해 구현하였다. 총 5개의 유속 조건 (0.025 - 0.20 m/s) 에 대해 모의를 수행하였으며 정자와 난자 사이의 거리를 바탕으로 수정률을 산정하였다. 정자와 난자의 뭉쳐있거나 퍼져있는 공간적인 분포 형태는 Standardized Morisita 지수를 통해 수치적으로 표현하였으며 이들과 수정률과의 관계를 규명하였다. 연구 결과에 따르면 성게 수정은 유속 조건이 0.1 m/s일 때 가장 빈번하게 발생하였으며, 성게 수정의 성공 여부는 크게 2가지 조건에 의해 결정되었다. 첫 번째로, Standardized Morisita 지수가 높을수록 다시 말해 생식세포들이 공간적으로 뭉쳐있어야 하며 두 번째는, 생식세포들을 충돌시킬 수 있는 원동력인 작은 와류가 존재해야 한다. 와류의 크기가 너무 크게 되면 생식세포들은 충돌하지 않고 확산만 되기 때문에 오히려 수정률이 감소하였다. 영역별로 분석한 결과에 따르면, 성게 몸체에 의해 형성된 재순환 영역이 수정과정에 있어 가장 지배적인 영역임을 확인하였다.

• Journal of Korea Water Resources Association
• /
• v.45 no.6
• /
• pp.545-555
• /
• 2012

A numerical modeling has become increasingly popular and more important to the study of water waves with a rapid advancement of computer technology. However, different types of problems are induced during simulating wave motion. One of the key problems is re-reflection to a computation domain at the incident boundary. The internal wave generating-absorbing boundary conditions have been commonly used in numerical wave models to prevent re-reflection. For the Navier-Stokes equations model, the internal wave maker using a mass source function of the continuity equation has been used to generate various types of waves. Nonetheless, almost every numerical experiment is performed in two dimensions and only a few tests have been expanded to three dimensions. More recently, a momentum source function of the Boussinesq equations is applied to generate essentially directional waves in the three dimensional Navier-Stokes equations model. In this study, the internal wave maker using a momentum source function is employed to generate targeted linear waves in the three-dimensional LES model.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.1
• /
• pp.55-68
• /
• 2020

In order to investigate the hydraulic characteristics of a boundary layer streaming over the beach cusps appeared in swells prevailing mild seas, we numerically simulated the shoaling process of Edge waves over the beach cusp. Synchronous Edge waves known to sustain the beach cusps could successfully be duplicated by generating two obliquely colliding Edge waves in front of beach cusps. The amplitude A_B and length L_B of Beach Cusp were elected to be 1.25 m and 18 m, respectively based on the measured data along the Mang-Bang beach. Numerical results show that boundary layer streaming was formed at every phase of shoaling process without exception, and the maximum boundary layer streaming was observed to occur at the crest of sand bar. In RUN 1 where the shortest waves were deployed, the maximum boundary layer streaming was observed to be around 0.32 m/s, which far exceeds the amplitude of free stream by two times. It is also noted that the maximum boundary layer streaming mentioned above greatly differs from the analytical solution by Longuet-Higgins (1957) based on wave Reynolds stress. In doing so, we also identify the recovery procedure of natural beaches in swells prevailing mild seas, which can be summarized such as: as the infra-gravity waves formed in swells by the resonance wave-wave interaction arrives near the breaking line, the sediments ascending near the free surface by the Phase II waves orbital motion were carried toward the pinnacle of foreshore by the shoreward flow commenced at the steep front of breaking waves, and were deposited near the pinnacle of foreshore due to the infiltration.

• Wind and Structures
• /
• v.34 no.1
• /
• pp.127-136
• /
• 2022

In this work a multi-fidelity non-intrusive polynomial chaos (MF-NIPC) has been applied to a structural wind engineering problem in architectural design for the first time. In architectural design it is important to design structures that are safe in a range of wind directions and speeds. For this reason, the computational models used to design buildings and bridges must account for the uncertainties associated with the interaction between the structure and wind. In order to use the numerical simulations for the design, the numerical models must be validated by experi-mental data, and uncertainties contained in the experiments should also be taken into account. Uncertainty Quantifi-cation has been increasingly used for CFD simulations to consider such uncertainties. Typically, CFD simulations are computationally expensive, motivating the increased interest in multi-fidelity methods due to their ability to lev-erage limited data sets of high-fidelity data with evaluations of more computationally inexpensive models. Previous-ly, the multi-fidelity framework has been applied to CFD simulations for the purposes of optimization, rather than for the statistical assessment of candidate design. In this paper MF-NIPC method is applied to flow around a rectan-gular 5:1 cylinder, which has been thoroughly investigated for architectural design. The purpose of UQ is validation of numerical simulation results with experimental data, therefore the radius of curvature of the rectangular cylinder corners and the angle of attack are considered to be random variables, which are known to contain uncertainties when wind tunnel tests are carried out. Computational Fluid Dynamics (CFD) simulations are solved by a solver that employs the Finite Element Method (FEM) for two turbulence modeling approaches of the incompressible Navier-Stokes equations: Unsteady Reynolds Averaged Navier Stokes (URANS) and the Large Eddy simulation (LES). The results of the uncertainty analysis with CFD are compared to experimental data in terms of time-averaged pressure coefficients and bulk parameters. In addition, the accuracy and efficiency of the multi-fidelity framework is demonstrated through a comparison with the results of the high-fidelity model.