• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.63-64
• /
• 2011

조명용 전기 에너지의 효율적인 이용을 위해서는 사용 환경에 따라 조명 기구를 부분 조광(local dimming) 제어할 필요가 있다. 본 연구에서는 LED 면광원의 부분 디지털조광 시스템을 개발하고 부분 조광된 면광원의 발광영역 및 밝기와 조명 대상물의 조도 분포와의 관계를 측정하고 평가하였다. LED 면광원을 16개의 구역으로 나누고 FPGA와 FET 스위치를 이용하여 각 구역의 점등 및 광량을 디지털 제어하였다. 또한 실험용 암실을 만들어 암실 바닥면을 91등분하고 각 지점의 조도를 측정하여 부분 조광제어에 따른 조도 분포를 평가하였다.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.9
• /
• pp.64-71
• /
• 1997

A new etching technique of meltback was investigated for GaAs lensed optical devices with selective windows opending in the LPE (liquid phase epitaxy) system. In the meltback process, the etch depth and the etch shape were controlled by the degree of under-saturation, etch time and other parameters. A GaAs/AlGaAs DH layer was grown on the selectively etched hemispherical well for optical device application such as lensed surface emitting LED. The regrowth process were related with the coolin grate and the well to well spacing. A novel surface emitting LED with hemispherical AlGaAs lens was fabricated using the meltbakc and regrowth as the key process for AlaAs lens array. The light emitting efficiency of the LED was upto three times higher than the similar structure LED without lens. The meltback and regrowth technique was applicable to manufacture the optical device in LPE.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.510-512
• /
• 2009

A volumetric 3D display system based on a rotating two dimensional color LED array is set up. It has a cylinder display space ${\Phi}800{\times}640mm3$ which is composed of 256 slices of pictures in one 3D image with each slice $320{\times}256$ LED pixels. The volumetric image has 4 gray scales and 64 colors. The main structure and working principle of the system is described in detail.

• Korean Journal of Optics and Photonics
• /
• v.24 no.2
• /
• pp.64-70
• /
• 2013

In this paper, two white light emitting diodes(LEDs) were manufactured by using two kinds of yellow phosphor, YAG:Ce and $(Sr,Ba)_2SiO_4:Eu$, and their spectroscopic properties were compared and analyzed. We found that the asymmetric double sigmoidal function can be applied to both white LEDs to obtain the center wavelength, the half width, and the skewness parameters. According to this analysis, the half width of the emitting spectrum of silicate phosphor was smaller than that of YAG phosphor, indicating smaller color rendering index. However, the silicate phosphor exhibited better color stability depending on the driving current than the YAG phosphor. The current dependence of the luminous efficacy of both white LEDs was investigated, which showed that efficacy decreased monotonically with current. The efficacy of the silicate-based white LED was lower than that of the YAG-based LED by about 10~12 lm/W.

• Journal of Energy Engineering
• /
• v.26 no.2
• /
• pp.64-72
• /
• 2017

The performance analysis of the 70 W class LED lighting system suitable for the Middle East environment was performed using the lumped parameter model. The LED light is composed of a heating substrate, a heat pipe, and a heat sink. We divided the LED lights into four objects and applied energy equilibrium to each of them to establish four lumped nonlinear differential equations. The solution of the simultaneous equations was obtained by the Runge-Kutta method. Convective heat transfer coefficients of the lumped model were obtained by multidimensional CFD analysis. As a result of comparison with experiment, it was found that the heating substrate had an error of $1.5^{\circ}C$ and the upper heat sink had an error of $1.8^{\circ}C$ and the relative error was about 0.6 %. Using this model, temperature distribution analysis was performed for normal operating conditions with an ambient temperature of $55^{\circ}C$, with sunlight only, with abnormal operating conditions with sunlight, and without an upper heat sink.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.1
• /
• pp.64-68
• /
• 2014

This paper introduces the use of a crown-shaped (CR) lens to effectively diffuse the light from a light-emitting diode (LED) without any loss in the light intensity, in contrast to polymer-bulb-type diffusers. The diffusion lens was designed based on the Snell's law, which describes the physical path of a ray passing through the boundary between different media. CR lenses were fabricated by polydimethylsiloxane (PDMS) casting and UV-embossing processes, which used a pre-designed metal mold and UV-curable resin, respectively. Through experiments and optical evaluations, it was verified that the newly proposed CR lens not only decreased the vertical light strength and glare effect from an LED light source but also improved the diffusion characteristics while maintaining the quality of the LED's light intensity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.1
• /
• pp.64-69
• /
• 2008

In order that a mobile robot can perform tasks in unknown environment localization of a mobile robot is essential task. In this paper, a new localization method for a mobile robot using an active landmark is proposed, which is very simple to implement. The landmark has a LED which can be controlled by a mobile robot via wireless communication. CCD camera gets two images of the landmark, one of which is with LED off and the other is with LED on. Because the landmark can be detected by using the difference image of the two images, detection time can be minimized. By using the characteristic points of the landmark, localization can be performed simply. A series of experiments are performed to evaluate the proposed method and the experimental results show that the proposed method can be applicable to the localization of a mobile robot.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.2
• /
• pp.245-253
• /
• 2003

The degree of conversion of cross-linked polymer has great importance in determining the physical and mechanical properties, and biocompatibility. Therefore, this study examined the comparison of light-cured composite resin polymerization of various light-curing systems composed of plasma arc, halogen, LED curing units and pluse-delay curing with FTIR. From this experiment, The following results were obtained : 1. From FTIR, the degree of conversion(DC) of composite resin was 34.52-49.31%, DC of composite resin used in Flipo was $39.36{\pm}1.22%$, CrediII $45.64{\pm}1.34%$, XL3000 $43.48{\pm}1.34%$, VIP(mode 4) $44.31{\pm}0.72%$, LUXOMAX $49.31{\pm}2.37%$, Elipar Freelight $44.51{\pm}0.62%$ and $34.52{\pm}0.85%$ in pulse-delay curing. 2. The degree of conversion of composite resin in each light-curing unit was highest DC of the LUXOMAX system, lowest DC of the pulse-delay curing. 3. Compared with other curing system, Flipo, LUXOMAX, and pulse-delay curing were significant difference(p<0.05). 4. In same curing method group, the differences of each light-curing unit were no significace in halogen(conventional) curing method(p>0.05), but significance in plasma arc curing and LED curing method(p<0.05).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.64-71
• /
• 2020

This study evaluated the effects of the culture media and light sources on the growth of microalgae Haematococuus pluvialis. Limited ingredient medium, Modified Bold's Basic Medium (MBBM), commercial liquid fertilizer medium Neo, and seven different light sources with different wavelengths were used to incubate H. pluvialis for 39 days, and the growth rates were compared. As a result, the growth of H. pluvialis, a limited ingredient medium, produced the highest cell growth in the fluorescent light source while cell growth was the lowest in the blue+red LED. The growth of H. pluvialis in commercial medium Neo was highest in the fluorescent light source, and cell growth was lowest in the blue LED. In this study, the MBBM culture medium showed better results than the Neo culture medium. Microalgae grown in the fluorescent light source using the MBBM culture medium showed the best cell growth result in this study. The results were optimized for the culture medium, light source, and light quantity in H. pluvialis culture for the production of secondary metabolites and provide basic data for the mass culture of microalgae.

• Journal of Plant Biotechnology
• /
• v.48 no.1
• /
• pp.62-70
• /
• 2021

We analyzed the growth and quality characteristics of barley sprouts grown under artificial light sources consisting of a fluorescent lamp or light-emitting diode (LED) in an aquaculture system (grown with water only, without nutrients). At the end of the observation period, the shoots grown under the fluorescent lamp treatment were the longest, followed by the LED treatment and natural light-treatment. It was also observed that growth was faster for sprouts subjected to a non-sterilizing treatment than those subjected to a 70% ethanol treatment. As the seed sowing rate for planting trays increased, the yield of harvested barley sprouts increased; among light treatments, the natural light treatment resulted in the lowest yield, while the fluorescent light treatment resulted in the highest. The total phenol and total flavonoid contents of extracts of the barley sprouts were highest for the natural light treatment, but TEAC and FRAP were both highest for the fluorescent lamp treatment. The essential amino acid content ranged from 41.64 to 45.93 mg/g and was relatively higher for the natural light treatment than the other two treatments, while the content of non-essential amino acids was highest for the LED treatment. The total amino acid content was highest for the LED treatment at 97.47 ± 6.30 mg/g, for which the content of non-essential amino acids (53.17%) was higher than that of essential amino acids (46.83%).