• Journal of Electrical Engineering and Technology
• /
• v.12 no.4
• /
• pp.1593-1599
• /
• 2017

This paper presents a multi-channel light-emitting diode (LED) driver IC with a current-mode current regulator. The proposed current regulator replaces resistors for current sensing with a sequentially controlled single current sensor and a single regulation loop for sensing and regulating all LED channel currents. This minimizes the current mismatch among the LED channels and increases voltage headroom or, equivalently, power efficiency. The proposed LED driver IC was fabricated in a $0.35-{\mu}m$ BCD 60-V high voltage process, and the chip area is $1.06mm^2$. The measured maximum power efficiency is 93.4 % from a 12-V input, and the inter-channel current error is smaller than as low as ${\pm}1.3%$ in overall operating region.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.91-92
• /
• 2011

본 논문에서는 옥내 LED 조명에 대하여 마이크로웨이브센서 기반의 조명 제어에 관한 연구이다. 실내에 설치된 LED 조명제어는 마이크로웨이브센서를 이용하여 옥내 사람의 움직임을 인식하고, 계측된 센서값을 이용하여 조명의 온·오프 및 dimming 제어를 수행하였다. 또한, 실내 환경 데이터를 계측하여 현재의 환경에 적합하도록 LED 조명을 제어하여 사람의 감성에 적합한 감성제어를 제시하고자 한다.

• Journal of Sensor Science and Technology
• /
• v.20 no.3
• /
• pp.193-198
• /
• 2011

In this paper, we used optoelectronic feedback to generate the carrier frequency for the ASK modulation of a lighting LED. A solar cell was used for photo-detector in the feedback circuit, and the LED light was ASK modulated by controlling the ON/OFF state of the switch that is installed in the feedback loop. The oscillation frequency of the optoelectronic feedback loop was about 50 kHz and the data rate of the ASK modulation was 9.6 kbps. In experiments, the optoelectronic feedback circuit was used for the ASK modulation of a lighting LED in the transponder of a visible light identification system, and data exchange between the transponder and the reader was successfully carried out.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.2295-2296
• /
• 2008

본 논문에서는 에너지 절감을 위하여 POWER LED 구동회로를 PIR(Pyroelectric Infrared Ray) 센서를 이용하여 ON/OFF 제어를 하였다. POWER LED의 전류 특성을 설명하였으며 설명된 전류 특성을 개선하고자 정전류 유지 회로를 구성하였다. 그리고 인체 감지 센서에서 발생되는 ON/OFF 신호를 증폭시키는 구동 회로를 설계하여 정전류 유지 회로에 직접 결합하는 방식을 제안하였다. 실험한 결과는 POWER LED의 ON 상태시 4Watt, OFF 상태시 0.5Watt를 소비하였으며, 정전류 유지 회로에 의해 POWER LED 구동 전류의 리플이 줄어들어 안정적인 동작을 하는 것으로 나타났다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4291-4295
• /
• 2010

This paper presents a LED lighting decoration system with a LED candle color control that can independently change its color. The proposed processing was applied to the control of a LED candle that is composed of red, green, blue(RGB) LEDs. In order to go our of use switching device, we developed the LED candle drived luminescence and we will comercialize the result.

• Journal of Sensor Science and Technology
• /
• v.15 no.3
• /
• pp.205-210
• /
• 2006

Hydrophobic polymer [ex. Poly(vinylidenfluoride)] layer was coated on polyaniline (PANi) sensor to reduce the contamination humidity. The differences in sensitivity to methanol gas detection in various humidity condition between pure-PANi sensor and sensor coated with poly(vinylidenfluoride) polymer (PVDF) (coated-PANi sensor) were investigated. Considering the relation between the density of pore, which was coated on the layer of the PANi sensor, and sensitivity was investigated. To fabricate the porous PVDF layer on PANi sensor, poly(vinylalcohol) (PVA), which is water-soluble polymer, was used. Coated-PANi sensor was less affected by humidity compared with pure-PANi sensor. And higher density of pore on PVDF layer led to higher sensitivity.

• Journal of Industrial Convergence
• /
• v.19 no.6
• /
• pp.67-72
• /
• 2021

The elevator installed in the building consists of an elevator call button and an input button for selection to the target floor. The elevator button is input only when the elevator user directly presses it. Such passenger input can be infected with an infectious disease due to contamination of the button. A non-contact button is required as a means for solving this problem, which detects the proximity of an object by applying a capacitive method. It implements a function of measuring the body's body temperature by attaching an infrared heat sensor, and provides a sterilization function of a button by attaching a UV-LED. A button was selected, a body temperature was measured through an infrared temperature measurement sensor, and UV-LED was turned on and sterilized when there was no user. The contactless elevator button is expected to be effective in preventing infectious diseases as it can prevent infection of viruses carrying infectious diseases and can detect body temperature to select positive patients of CIVID 19.

• Journal of Sensor Science and Technology
• /
• v.12 no.1
• /
• pp.44-50
• /
• 2003

A security system consisted of an infrared sensor and PLD(Programmable Logic Device) was fabricated to prevent an intruder. The fabricated system detect the intruder using infrared sensor and has password key pad to permit someone to enter the house and office. The control circuit of the system is designed by VHDL(Very high speed integrated Hardware Description Language). The system was demonstrated in various conditions and the output signals were displayed in LCD, LED, buzzer and so on. This designed system in this paper has a advantage to supplement additional function with ease.

• Journal of the Institute of Convergence Signal Processing
• /
• v.23 no.2
• /
• pp.50-61
• /
• 2022

This work demonstrates the design and evaluation of Aqua-Aware, a lightweight miniaturized light emitting diode (LED) based underwater compact sensor node which is used to obtain different characteristics of the underwater environment. Two optical sensor nodes have been designed, developed, and evaluated for a short and medium link range called as Aqua-Aware short range (AASR) and Aqua-Aware medium range (AAMR), respectively. The hardware and software implementation of proposed sensor node, algorithms, and trade-offs have been discussed in this paper. The underwater environment is emulated by introducing different turbulence effects such as air bubbles, waves and turbidity in a 4-m water tank. In clear water, the Aqua-Aware achieved a data rate of 0.2 Mbps at communication link up to 2-m. The Aqua-Aware was able to achieve 0.2 Mbps in a turbid water of 64 NTU in the presence of moderate water waves and air bubbles within the communication link range of 1.7-m. We have evaluated the luminous intensity, packet success rate and bit error rate performance of the proposed system obtained by varying the various medium characteristics.

• TTA Journal
• /
• s.161
• /
• pp.78-82
• /
• 2015