• 반도체디스플레이기술학회지
• /
• 제12권4호
• /
• pp.45-48
• /
• 2013

The electronic device, such as flat panel display (FPD), is very important in our life as a means of communication between humans. Liquid crystal display (LCD), which is categorized as a flat panel display, has been used in many display products, especially in TV industry. An LED TV is composed of several electrical components, such as liquid critical module (LCM), analog to digital convertor (AD), power supplier, and inverter board. These modules are very vulnerable to particulate contamination, and causing malfunction or visibility degradation. In this study, we developed a test method for prediction of LCM's lifetime. The test system consists of carbon particle generation flame, dilution system, test chamber, and particle concentration monitoring instrument. Since the carbon particles are the most abundant in the atmosphere and easily absorb light, soot particles are used as a challenging material for this test. The concentration of generated soot particles is set around 4,000,000 #/cc, which is 400 times higher than that of usual atmospheric particles. Through this experiment, we deduced the relationship between the dust concentration and life time of the test specimen.

• 음성과학
• /
• 제15권2호
• /
• pp.67-77
• /
• 2008

In this paper, we implemented a robust speech recognizer using the TMS320VC33 DSP. For this implementation, we had built speech and noise database suitable for the recognizer using spectral subtraction method for noise removal. The recognizer has an explicit structure in aspect that a speech signal is enhanced through spectral subtraction before endpoints detection and feature extraction. This helps make the operation of the recognizer clear and build HMM models which give minimum model-mismatch. Since the recognizer was developed for the purpose of controlling car facilities and voice dialing, it has two recognition engines, speaker independent one for controlling car facilities and speaker dependent one for voice dialing. We adopted a conventional DTW algorithm for the latter and a continuous HMM for the former. Though various off-line recognition test, we made a selection of optimal conditions of several recognition parameters for a resource-limited embedded recognizer, which led to HMM models of the three mixtures per state. The car noise added speech database is enhanced using spectral subtraction before HMM parameter estimation for reducing model-mismatch caused by nonlinear distortion from spectral subtraction. The hardware module developed includes a microcontroller for host interface which processes the protocol between the DSP and a host.

• 한국태양에너지학회 논문집
• /
• 제32권4호
• /
• pp.51-58
• /
• 2012

This study aims to analyze characteristics of Cell surface temperature and generated power performance for improving PV(Photovoltaic) system condition according to the cell opening ratio of transparent crystal PV system at Spandrel of curtain-wall. For this purpose, alternatives were classified for eight different cases that opening ratio of transparent crystal PV system varied from 0% to 70%, which was used by simulation tool, EnergyPlus. As results, it turned out that increasing opening ratio of transparent crystal PV system led higher PV surface temperature, back-sheet type was thus the most advantageous for decreasing surface temperature, annual generating efficiency, and annual accumulated generating power. Consequently, blocking off air space from outside insolation can advantageously keep to be better condition for generated power performance.

• Current Optics and Photonics
• /
• 제1권2호
• /
• pp.90-94
• /
• 2017

Visible light identification (VLID) is a user identification system for a door lock application using smartphone that adopts visible light communication (VLC) technology with the objective of high security, small form factor, and cost effectiveness. The user is verified by the identification application program of a smartphone via fingerprint recognition or password entry. If the authentication succeeds, the corresponding encoded visible light signals are transmitted by a light emitting diode (LED) camera flash. Then, only a small size and low cost photodiode as an outdoor interface converts the light signal to the digital data along with a comparator, and runs the authentication process, and releases the lock. VLID can utilize powerful state-of-the-art hardware and software of smartphones. Furthermore, the door lock system is allowed to be easily upgraded with advanced technologies without its modification and replacement. It can be upgraded by just update the software of smartphone application or replacing the smartphone with the latest one. Additionally, wireless connection between a smartphone and a smart home hub is established automatically via Bluetooth for updating the password and controlling the home devices. In this paper, we demonstrate a prototype VLID door lock system that is built up with LEGO blocks, a photodiode, a comparator circuit, Bluetooth module, and FPGA board.

• 건축역사연구
• /
• 제21권5호
• /
• pp.57-68
• /
• 2012

The purpose of this study is to identify the characteristics of the use of the western building system with the change of the architectural design in the Japanese colonial period focused on the facility built by Joseon Government-General in 1910s. Through the 131 cases of governmental building, the tendency of the use of western building system. After 1910, Japanese Imperialism adopted the western wooden building system which main structure was made with combination of small pieces of timber for building the modern governmental facility because of the political and financial intention. So, all facilities were designed similarly by the structural module and the facade was finished by the feather boarding in the same with the 'sitamitakei-giyohu' in Japan. the functional requirements of each facility was not revealed. Such an western wooden building system was used until 1920s with the change of the facade by the mortar coating. But, in 1920s-1930s, the building system have begun to change. The use of the brick system caused some changes although the planing concept was still lasted. On the other hand, the use of the reinforced concrete led to more changes on the overall scheme.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권6호
• /
• pp.939-950
• /
• 2015

Wave-induced Longshore Sediment Transport (LST) play an important role in the dynamics of the Dhanushkodi sandspit located southeast of Rameshwaram. The LST along the Dhanushkodi coast is studied based on data collected simultaneously in Gulf of Mannar (GoM) and Palk Bay (PB) using directional waverider buoys. The numerical model REF/DIF1 was used to calculate the nearshore waves and the LST rate was estimated using three different formulae. The model validation was done based on the measured nearshore waves using InterOcean S4DW. Numerical model LITPACK was also used for simulating non-cohesive sediment transport and the LITLINE module was used to study the shoreline evolution over 5 years. Low net annual LST along PB (${\sim}0.01{\times}10^6m^3$) compared to the GoM region ($0.3{\times}10^6m^3$) were due to the weak waves. Accretion in the region led to growth of the Dhanushkodi sandspit by 65 m during the period 2010-2015.

• 한국지구과학회지
• /
• 제42권5호
• /
• pp.588-603
• /
• 2021

This study details a researcher's self-study journey in advancing from a computational thinking (CT) novice to an expert. The researcher went through a four-stage process, with a preliminary literature review preceding the four stages. From the literature review, the computational thinking analysis (CT_AT) tool was developed for use in stage one to analyze science, technology, engineering, art, and mathematic (STEAM) modules. Although no discernable patterns were found in analyzing the five science and five engineering-based modules, the analysis revealed which CT practices were missing or weakly exposed. In stage two activities were suggested to promote these missing or weakly exposed practices. Stage three required the researcher to develop his own STEAM module from the viewpoint of exposing students to CT. The fourth stage was to validate the CT_AT through interviews with pre-service and in-service teachers. These interviews led to changes in the CT_AT tool and, as a result, the researcher produced a guidebook that could be used by teachers in their own CT studies. This guidebook can be used by teachers to develop and become competent in CT skills.

• Nuclear Engineering and Technology
• /
• 제54권4호
• /
• pp.1508-1515
• /
• 2022

In the present study, the cavity module of the MELCOR code is used for the simulation of molten corium concrete interaction (MCCI) during the late phase of postulated large break loss of coolant (LB-LOCA) accident in the APR1400 reactor design. Using the molten corium composition data from previous MELCOR Simulation of APR1400 under LB-LOCA accident, the ex-vessel phases of the accident sequences with long-term MCCI are recalculated with stand-alone cavity package of the MELCOR code to investigate the impact of water ingression and melt eruption models which were hitherto absent in MELCOR code. Significant changes in the MCCI behaviors in terms of the heat transfer rates, amount of gases released, and maximum cavity ablation depths are observed and reported in this study. Most especially, the incorporation of these models in the new release of MELCOR code has led to the reduction of the maximum ablation depth in radial and axial directions by ~38% and ~32%, respectively. These impacts are substantial enough to change the conclusions earlier reached by researchers who had used the older versions of the MELCOR code for their studies. and it could also impact the estimated cost of the severe accident mitigation system in the APR1400 reactor.

• 센서학회지
• /
• 제32권2호
• /
• pp.118-123
• /
• 2023

This study presents sensor system for autonomous mobile robot capable of floor-to-floor self-navigation. The robot was modified using the Turtlebot3 hardware platform and ROS2 (robot operating system 2). The robot utilized the Navigation2 package to estimate and calibrate the moving path acquiring a map with SLAM (simultaneous localization and mapping). For elevator boarding, ultrasonic sensor data and threshold distance are compared to determine whether the elevator door is open. The current floor information of the elevator is determined using image processing results of the ceiling-fixed camera capturing the elevator LCD (liquid crystal display)/LED (light emitting diode). To realize seamless communication at any spot in the building, the LoRa (long-range) communication module was installed on the self-navigating autonomous mobile robot to support the robot in deciding if the elevator door is open, when to get off the elevator, and how to reach at the destination.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권9호
• /
• pp.842-846
• /
• 2016

물속의 용존산소를 이용하면 물고기가 아가미를 이용하여 호흡하듯이 사람이 수중에서 호흡이 가능하지만, 물속에 포함된 용존산소의 양이 적기 때문에 필요한 산소량을 확보하는 문제가 해결되어야 한다. 우선 물의 유량을 증가시켜 분리되는 산소량을 증가하는 것이 가능하지만, 필요한 펌프와 멤브레인 그리고 주변기기의 용량 증가로 분리장치의 부피와 무게 그리고 소요비용도 함께 증가하게 된다. 이러한 문제를 효과적으로 해결하기 위해 많은 양의 산소를 포함하는 날숨의 특성을 이용하면 필요한 산소량을 효과적으로 확보할 수 있다. 일반적으로 날숨에 포함된 산소량은 공기보다 낮고, 이산화탄소 량은 공기보다 많은 것으로 알려져 있다. 본 연구에서는 용존기체 분리장치의 입력 단에 날숨을 혼합한 후, 용존기체 분리장치에서 산소를 포함하는 용존기체를 재분리하는 과정을 거치며, 이때, 입력단에 설치된 수중펌프의 동작으로 수압이 증가하므로, 이러한 수압을 갖는 물에 날숨을 혼합하기 위해서는 압축기가 요구되므로 분리장치의 무게와 부피 그리고 소비 전력이 증가하게 된다. 본 연구에서는 입력단의 압력을 감소시킴으로써 압축기를 사용하지 않고도 날숨을 물에 혼합하는 구조를 갖는 것이 특징이다. 실험을 통해 압축기를 사용하지 않고 날숨이 입력단의 물에 혼합되는 것이 가능함을 제시하였으며, 날숨이 입력단에 공급된 후 분리장치를 통해 분리된 기체의 분리특성을 제시하였다. 날숨을 사용함으로써 용존기체의 분리량이 크게 증가하였으며, 공급되는 날숨의 유량이 증가하면 분리되는 용존 기체의 양도 증가하였다.