• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.1
• /
• pp.35-43
• /
• 2008

Aviation obstacle lights including controller for the safe night aviation service have applied to high voltage transmission line of which height is from $60{\sim}180 m$, Fresnel lens made by Augustine Fresnel have been applied to light houses, These Fresnel lens were applied to aviation obstacle lights and have been universally used, It was reported that Fresnel lens for aviation obstacle light was used in the first place in Korea in 1987, LEDs have recently been applied to aviation obstacle lights, So, the optimum physical design is essential to the design of aviation obstacle light. In this study, optical and three dimensional modeling of LED module and globe lens were performed, And thermal analysis due to LED thermal source and service thermal condition in high voltage transmission line was performed and was analyzed comparing with experiments, The optimum design process of medium intensity LED aviation obstacle lights was constructed with three dimensional modeling, thermal analysis, and thermal experimental technique.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.560-563
• /
• 2006

LED is promising for the application of specialty illumination. Thiscolor management system, V-core, with LED light sources and the structure of V-core for LCoS projector has been proposed to improve the primary saturation, uniformity and contrast. We designed the high efficient LED modules for high brightness requirement. The LED module can operate in narrow-direction indicator, $12^{\circ}$.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.137-138
• /
• 2015

본 논문은 알루미늄 재질로 된 방열판을 LED조명기구에 적용해서 열 해석을 한 것으로서, PCB에 25[W]급 LED를 배치하여 COMSOL Multi-physics로 시뮬레이션 하였다. 그 결과 LED와 PCB 경계면의 온도는 $69^{\circ}C$이고, PCB바닥면의 온도는 $28^{\circ}C$로 실제작한 FR-4 재질의 LED Module과 근접한 온도임을 확인 할 수 있었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1086-1089
• /
• 2006

We have developed 2.4" QVGA wide color gamut LCD module using RGB-LED backlight. The color gamut is achieved 100% of NTSC compared to 70% of NTSC when used with White-LED backlight. But RGB LED backlight is difficult to maintain its color balance since RGB LED is gradually degraded by the change of ambient temperature and a long term aging characteristic, etc. This paper describes a feasibility study of our optical feedback system developed for preventing such a color shift.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.120-122
• /
• 2008

This paper presents a color control algorithm for LED lights with independently changable illuminance. The proposed algorithm adjusts the light intensity to obtain a desired color with alterable illuminance To verify the validity of the proposed algorithm, it was applied to control of a RGBW LED module. The achieved color temperature range of the module was from 3000K to 7500K, and the illumination one was from 500 lux to 1500 lux.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.522-524
• /
• 2005

The LED light source has many excellent advantages for the application of LCD backlight module. As we know, the operational temperature can significantly influence the characteristics of LEDs. Heat can damage the LED 's quality, and decrease its lifetime and output light intensity. In this paper, we perform computer software, Flomerics CFD (Computational Fluid Dynamics), to simulate heat distribution of the 20.1" LED backlight module we designing, and realize how the different heat sinks can solve the serious heat problem in practice.

• Proceedings of the KAIS Fall Conference
• /
• 2000.10a
• /
• pp.99-103
• /
• 2000

최근 많은 분야에서 사용피고 있는 소형 전광판을 이용하여 원거리에서도 메시지 전달이 가능한 광고용 전광판을 제작하였다. FSK Modem과 RF-Module을 이용하여 실시간으로 광고의 내용을 바꾸는 것을 원칙으로 구현하였다.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2011.11a
• /
• pp.54-55
• /
• 2011

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.3
• /
• pp.485-490
• /
• 2012

In this paper, driver circuit of LED lights for ships is designed and implemented to replace conventional lights with filament which have short life time due to vibration of ships. The driver of LED module is switching circuit without transformer to reduce volume and cost. As switch circuit controls input 220 VAC with PWM, LED module is reliably driven. Power factor is improved by using valley-fill PFC compensation circuit which is handled to pulse current of switching circuit. Serial-parallel LED circuit is applied to reduce change period of lights of long-term navigation ships. Array of serial-parallel can operate even if some of LEDs is damaged. It is suitable for ships that power consumption and power factor of lights including developed drive circuit have 39Watt and 0.925 respectively.

• Journal of Advanced Navigation Technology
• /
• v.20 no.1
• /
• pp.99-106
• /
• 2016

Wearable display market is a consistently growing field to handle a smart device with ease. Wearable display is an efficient device that can show the information to the user. In this paper, propose the scheme of a wearable display using LED and implement it including controlling remotely with BLE. Traditional outdoor LED display requires the dedicated controller and its software. Therefore, to control those LED display, it should implement a driver and its own way of communication. The proposed method is to ensure the independence and extensibility by separating driver module and communication module for controlling LED display. In addition, by adopting a short-range communication with Bluetooth 4.0 and a LED driver with low-power technology, it can be showed to control system configuration and display with a smart device.