• 한국정보기술학회 영문논문지
• /
• 제9권2호
• /
• pp.75-87
• /
• 2019

This paper presents a fully digital controlled power supply unit for the wireless controlled dimmable LED lighting system. The proposed power supply designed using a fly-back converter, which is directly controlled by a microprocessor. Although the proposed circuit does not sense the AC input current and has not AC input voltage feed-forward, it can achieve a high power factor. The proposed power supply directly regulates the output power for LED loads using the PWM and PFM control of the fly-back converter without additional regulator. For a wireless remote control function, the Zigbee modem is equipped in the proposed power supply. A prototype set-up has been built and tested. Through the experiment with a prototype set-up, the usefulness of the proposed power supply is verified.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.980-981
• /
• 2015

A quasi-resonant flyback converter using a simple 8-bit microcontroller for a LED lighting is proposed in this paper. The proposed converter is easily and precisely controlled by the simple controller using a low-cost 8-bit microcontroller. Also, in order to operate the 8-bit microcontroller, the proposed converter system does not require any additional power supply for the controller. A prototype power supply is developed to supply a 270[W] LED lighting with the wide input voltage ranges ($175[V_{ac}]-265[V_{ac}]$). Experimental results will be show the practicality and validity of the proposed circuit.

• 조명전기설비학회논문지
• /
• 제27권10호
• /
• pp.15-20
• /
• 2013

In this paper, wireless power transfer system using the magnetic resonance was designed and applied to LED lighting for implementation of wireless lighting. This lighting was made by the converted DC driving type and the direct AC driving type. In the former, transferred AC power was rectified into DC and regulated to the specified voltage value, which leads to produce the loss at the rectifying and regulating circuit. In the latter, wireless-transferred AC power was directly applied to LED, which get rid of the loss derived from the additional circuit. For the efficiency-comparison between the former and the latter, the power at each stage was measured when the same optical output radiated from LED lighting part. The result revealed that the direct AC driving type had 18% higher efficiency than the DC driving type and confirmed that LED lighting using magnetic resonance wireless power transfer system can be efficient by direct AC power supply. And the direct AC driving type had the simple circuit structure and the simple LED lighting formation, so this can leads to various application.

• 한국전기전자재료학회논문지
• /
• 제26권8호
• /
• pp.629-634
• /
• 2013

The rectified voltage supplied to LED lamp is used in load and then the surplus voltage can be produced in LED lighting. In this case, LED lighting is proposed that can recyclable the excess voltage to supply power to the controller.

• 한국산학기술학회논문지
• /
• 제11권9호
• /
• pp.3446-3450
• /
• 2010

본 논문은 친환경적이며 차세대 광원인 LED 광원을 이용한 감성조명 LED 형광등을 개발하여 학생들의 학교생활 공간인 교실에 필요한 안정성과 활동성을 주는 교실조명을 만들어 보고자 하는데 목적이 있다. 감성조명 LED 형광등의 설계는 색상변환용 제어 컨트롤러, LED램프에 안정한 전원을 공급하기 위한 구동시스템, LED램프 및 램프를 구성하기 위한 PCB판, 케이스 등으로 구성하여 설계하였다. 설계된 감성조명용 LED 형광등의 시제품을 개발하였으며, 실험을 통하여 개발된 시스템의 동작과 필요한 색상을 얻을 수 있음을 증명하였다.

• 제어로봇시스템학회논문지
• /
• 제20권9호
• /
• pp.984-993
• /
• 2014

In this paper, we propose a design for an efficient hybrid LED street lighting management system using standalone solar photovoltaic. The proposed efficient hybrid LED street lighting management system was composed of hybrid power conditioning system, gateways, LED street lights and a monitoring server. The hybrid power conditioning system was designed to charge produced power by solar photovoltaic panels in day time, and supply power to the LED street lights in night time. If there is insufficient power, the system was designed to operate using firm power, because the system utilizes photovoltaic power. A system control algorithm allied to the lighting management system, and experimented by being configured to the functions that are able to perform real-time monitoring and remote control through the lighting management system even when absent. In the result of the efficiency analysis of the hybrid lighting management system proposed in this paper, we were able to increase the energy efficiency compared to existing lighting control systems by reducing power consumption and electricity costs.

• 한국전기전자재료학회논문지
• /
• 제35권5호
• /
• pp.466-470
• /
• 2022

In order to widely disseminate LED lighting, LED lighting technology that directly uses AC commercial power has been recently introduced. AC powered LED lighting technology has a problem in that the light brightness of the LED changes because the voltage applied to the LED and the current flowing through the LED continuously change. In this study, when the LED current is greater than the design current, the current control signal generated by the controller is supplied to the current source to supply only the design current to the LED by increasing the voltage drop at the current source. If it is smaller than the design current, the controller is adjusted so that the current is supplied only to the LED without a voltage drop in the current source. It can be seen that the higher the maximum rectified voltage, the faster the lighting time of the LED light emitting block is, so that the power factor of the LED lighting is improved. The LED lighting technology proposed in this study enables LED lighting with constant light brightness, reduced power consumption, and long lifetime.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 춘계학술대회
• /
• pp.555-558
• /
• 2017

본 논문은 서로 다른 크기의 교류 전원을 인가하더라도 균일한 소비 전력과 광 효율을 나타낼 수 있는 이종 전원 지원 AC LED 구동 장치를 설계 하였다. 서로 다른 크기의 입력 전압과 편차를 설정하여, 두 입력전압에서 전기적 광 특성이 동일함을 확인 하였다. 또한 교류 전원의 피크전압에 따라 특정 LED 구간에서 발생하는 미 점등을 개선하여, 모든 상용 교류 입력 전압에서 전 구간 LED 점등을 구현하였다.

• Journal of information and communication convergence engineering
• /
• 제19권4호
• /
• pp.214-220
• /
• 2021

In this study, we constructed several scenarios that are required for LED lighting, and we designed and implemented an LED lighting control system to operate these scenarios to confirm their behavior. An LED lighting control system is a hybrid control board that is designed by combining LED controllers and SMPS, consisting of an AC/DC power supply part that converts AC 220 V into DC 12 V, and a drive and control part that controls the scenario and color of the LED module. Conventional LED light controllers have an input power of DC 12 V, so when using the input AC 220 V, the SMPS must be connected to the LED light controller. To eliminate this inconvenience, a hybrid LED lighting control system was configured to combine LED lighting controllers and SMPS into one control system. Furthermore, we designed a control system to represent the most appropriate color according to the input of the distance and illumination using a fuzzy control system to conduct computer simulations.

• 융복합기술연구소 논문집
• /
• 제3권1호
• /
• pp.37-40
• /
• 2013

Plant factory industry as a new agriculture is in the spotlight. In this paper, we experimented plant factory applied photovoltaic system and LED lighting. For growing the plant, red, blue and white LED were placed into 1:4:3. Electric power generated by the photovoltaic system was supplied on DC power supply instead of AC. The designed and experimented power generation amount per day of photovoltaic system were 2,860 Wh and 2,272 Wh respectively. Plant has not been grown at the dead space of LED lighting so it is required to array LED lighting.