• 제목/요약/키워드: LED light

검색결과 2,619건 처리시간 0.031초

굴절의 법칙의 수학적 증명과 그 교수학적 의의 (The mathematical proofs of refraction law and its didactical significances)

  • 강흥규
    • 한국수학사학회지
    • /
    • 제19권1호
    • /
    • pp.65-78
    • /
    • 2006
  • 물리학에서 Snell의 법칙으로 불리는 굴절의 법칙은 수학사적으로 매우 중요한 의미를 가진다. Snell이 많은 관찰 자료를 바탕으로 굴절의 법칙 $\frac{v_1}{sin{\theta}_1}=\frac{v_2}{sin{\theta}_2$를 발견한 이후 많은 수학자들은 '최소 시간의 원리'를 사용하여 이 식을 수학적으로 증명하려 시도하였으며 이러한 노력은 미분의 발명을 촉진한 주요한 동력 중의 하나였다. format는 자신만의 방법을 개발하여 이 문제를 최초로 해결하였으며, 이때 Format가 사용한 극대$cdot$극소 방법은 현대의 미분을 통한 방법과 유사한 것으로 이후 Leibniz의 무한소 방법의 기원이 되었다. 역사적으로 수학과 물리학은 밀접하게 상호작용하면서 과학의 발전을 이끌었다. 굴절의 법칙은 이러한 수학과 물리학의 관계를 잘 보여준다. 물리학은 수학에 질문을 제기하고 수학은 보편적인 원리로 그것을 해결함으로써 처음의 현상보다 더 넓은 현상까지 포괄적으로 설명한다. 수학교육의 목적은 완성된 수학을 배우는 것뿐만 아니라 수학을 응용할 줄 아는 능력이라는 Freudenthal의 말을 생각할 때, 굴절의 법칙은 고등학교의 우수한 학생이나 대학의 수학 교육과정에 적합한 소재이다. 대학의 수학이나 물리학 전공과정에서는, 미분을 통한 현대적인 방법뿐만 아니라 format의 방법(미분을 명시적으로 사용하지는 않았지만 원시적인 미분의 방법을 쓰고 있는)을 동시에 다루면서 양자를 비교하는 기회를 가지는 것은 교육적으로 가치 있는 일이라 생각된다.

  • PDF

주민참여형 커뮤니티정원 조성 가이드라인 마련을 위한 국외 사례 비교 연구 (Case Study on the Overseas Locally-Led Community Design Guidelines)

  • 이애란;박재민
    • 한국조경학회지
    • /
    • 제46권3호
    • /
    • pp.117-129
    • /
    • 2018
  • 최근 도시농업, 텃밭 가꾸기 등에 대한 관심과 활동에서 공동체가 함께 만들어가는 아름다운 커뮤니티정원에 대한 사회적 수요가 증가하고 있다. 하지만 국내의 경우, 개인단위의 생산중심 텃밭가꾸기 활동은 익숙한 반면, 공동체가 함께 아름다운 정원으로 가꾸는 것에 대한 측면은 여전히 경험이 적고 정보 또한 부족한 실정이다. 이에 본 연구에서는 국외 커뮤니티정원 조성 가이드라인을 분석하여, 국내 도입되어야 할 가이드라인의 특성과 시사점을 도출하고자 하였다. 연구방법은 국외 커뮤니티정원 가이드라인 6개를 비교분석하였다. 연구결과, 국외에서 커뮤니티정원 관련 가이드라인은 일반인을 대상으로 하여, 비교적 적은 분량(100쪽 이내)으로 제작되었으며, 자료에 대한 온라인 접근이 용이한 편이었다. 일부에서는 편집에 대한 허용을 하고 있었다. 가이드라인의 구성은 초보자가 처음부터 따라할 수 있도록 개요, 기획, 대상지 선정 및 설계, 시공, 유지관리로 구성되어 있었다. 다만 초보자들을 위하여 첫 미팅의 논의사항부터 커뮤니티를 어떻게 형성해 나아가야 하는지에 관한 자세한 내용을 담고 있었다. 개요에서는 개념 정의, 목적, 효과, 성공요인 등을 담아 처음 접하는 사람들의 이해를 돕고 있었다. 대상지 선정에서는 대상지의 햇빛, 급수, 토양오염 등을 체크리스트 등을 활용하여 확인할 수 있도록 하였다. 하지만 설계와 관련해서는 구체적 도면, 이미지 보다는 설명중심으로 다루고 있어 초보자의 이해를 돕기에는 어려움이 있었다. 시공에서는 기반조성, 구조물설치, 식재부분을 다루었으며, 특히 정원 조성 시 노동력의 확보 방법을 구체적으로 포함하였다. 유지관리는 자세히 다루며, 시설물, 회원, 자금에서부터, 병충해, 반달리즘, 유기농 재배, 생물다양성 등까지 확장하여 설명하였다. 부록은 다양한 체크리스트, 행정 서식, 가이드라인, 도면, 연락처 등을 포함하여 초보자들의 이해를 돕고 있었다. 본 연구는 국외 커뮤니티정원의 조성 경향과 특성을 이해하는 데 도움을 주며, 더 나아가 향후 도입 예정인 커뮤니티정원 조성 가이드라인의 기본 방향을 제시해 준다는데 의의가 있다.

Efficiency Improvement in InGaN-Based Solar Cells by Indium Tin Oxide Nano Dots Covered with ITO Films

  • Seo, Dong-Ju;Choi, Sang-Bae;Kang, Chang-Mo;Seo, Tae Hoon;Suh, Eun-Kyung;Lee, Dong-Seon
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
    • /
    • pp.345-346
    • /
    • 2013
  • InGaN material is being studied increasingly as a prospective material for solar cells. One of the merits for solar cell applications is that the band gap energy can be engineered from 0.7 eV for InN to 3.4 eV for GaN by varying of indium composition, which covers almost of solar spectrum from UV to IR. It is essential for better cell efficiency to improve not only the crystalline quality of the epitaxial layers but also fabrication of the solar cells. Fabrication includes transparent top electrodes and surface texturing which will improve the carrier extraction. Surface texturing is one of the most employed methods to enhance the extraction efficiency in LED fabrication and can be formed on a p-GaN surface, on an N-face of GaN, and even on an indium tin oxide (ITO) layer. Surface texturing method has also been adopted in InGaN-based solar cells and proved to enhance the efficiency. Since the texturing by direct etching of p-GaN, however, was known to induce the damage and result in degraded electrical properties, texturing has been studied widely on ITO layers. However, it is important to optimize the ITO thickness in Solar Cells applications since the reflectance is fluctuated by ITO thickness variation resulting in reduced light extraction at target wavelength. ITO texturing made by wet etching or dry etching was also revealed to increased series resistance in ITO film. In this work, we report a new way of texturing by deposition of thickness-optimized ITO films on ITO nano dots, which can further reduce the reflectance as well as electrical degradation originated from the ITO etching process.

  • PDF

일부지역 임산부의 구강건강관리에 대한 조사연구 (A study on the oral health care of pregnant women in a region)

  • 이가연;원복연
    • 한국치위생학회지
    • /
    • 제9권1호
    • /
    • pp.1-14
    • /
    • 2009
  • The purpose of this study was to examine the oral health care aware-ness of pregnant women and their actual oral health care in an effort to provide information on how to assist pregnant women to have the right knowledge on oral health and improve their oral health care. The subjects in this study were pregnant women who used obstetrics and gynecology hospitals or participated in pregnancy/child-rearing programs in the region of P. After a self-administered survey was conducted in July and August 2008, the following findings were given: 1. As for the best case of oral health care, the largest number(77.2%) of the pregnant women investigated brushed all the teeth, gums and tongue when they did toothbrushing. The smallest number of the women(6.8%) spent three minutes or more brushing their teeth. 2. As to dental treatment experience during pregnancy by age, 27.0 percent of the age 26-30 group had ever received dental treatment during pregnancy, which was higher than the rates of the other age groups with the same experience. 3. Regarding the necessity of oral health education geared toward pregnant women, 94.1 percent of the age 26-30 group and 96.3 percent of the group of age 31 and up felt the need for that, which were significantly higher than 72.7 percent of the age 20-25 group who agreed to the necessity of that education. 4. As to connections between oral health status and oral health care, the women who were in good oral health got 6.60 on oral health care. They scored significantly higher than those who were in a moderate state of oral health and who were in bad oral health, as the latter two groups respectively got 5. There was a significant correlation between oral health state and oral health care and between oral health knowledge and oral health care. The better oral health status led to better oral health knowledge, and the better oral health knowledge was followed by better oral health care. 6. As for factors affecting oral health care, oral health knowledge had the largest impact on that, followed by age, oral health status, experience of receiving oral health education for pregnant woman, dental treatment experience during pregnancy, monthly income and stress caused by oral diseases. Given the findings of the study, oral health education should be provided in light of the special physical and mental state of pregnant women. They should be encouraged to receive possible dental treatment during pregnancy if necessary, and they should learn about how to cope with a dental disease in case of develop it.

  • PDF

20세기 디자인교육의 기하학적인 형태에 대한 탐구 - 프뢰벨 유치원 교육과의 연관성을 중심으로 - (Research on Geometric Shape in the 20th Century Design Education - Focused on the relation of $Fr{\ddot{o}}bel$ Kindergarten Education -)

  • 방경란
    • 디자인학연구
    • /
    • 제18권2호
    • /
    • pp.325-334
    • /
    • 2005
  • 본 연구는 20세기 디자인교육에 있어서 기하학적인 형태에 나타난 조형원리의 근원을 탐색하는 것이다. 디자인 교육에 등장한 기하학적인 형태는 19세기 독일을 중심으로 일어난 유치원 운동에서 도입된 교육사상에서부터 출발한다. 19세기 독일의 유아교육자 프뢰벨(Friedrich $Fr{\ddot{o}}bel$)에 의하여 탄생된 프뢰벨교구(Spielgaben)의 인기는 학교에서의 미술교과목에서 도구를 사용하게 되는 계기를 마련하게 된다. 과학적이고 수학적인 원리에 의하여 만들어진 프뢰벨교구는 최소한의 색채와 형태를 채택한 어린이를 위한 교육프로그램이었다. 19세기 기하형태의 블록놀이를 중심으로 개발된 '슈필가벤(Spielgaben)'과 '작업($Bech{\ddot{a}}ftigungsmaterial$)'이란 이름으로 진행된 놀이프로그램은 초기모더니스트들에 의해 기하형태에 대한 선택으로 이어지게 된다. 또한 20세기 현대디자인교육의 시작이 되었던 바우하우스의 기초교육프로그램에서도 적용된다. 이러한 사실에서 20세기 디자인교육에서 나타난 점선면의 원리와 기하학적 형태의 선택에 대한 근원적 배경을 찾을 수 있다. 따라서 본 연구는 유치원운동과 근대디자인교육과의 기하학적인 형태라는 동일한 범주 속에서의 연관성에 대한 논의이다. 즉, 이러한 연관성에 대하여 문헌조사를 통하여 탐색하고 서로의 관계에 대하여 분석하고 비교하여 연구하였다.

  • PDF

라만 분광법을 이용한 지질생산 미세조류 Scenedesmus obliquus 성장 평가 (Growth Evaluation of Lipid Production Microalgae Scenedesmus obliquus using Raman Spectroscopy)

  • 유용진;이건우;백동현;김진우;김호섭
    • 한국산학기술학회논문지
    • /
    • 제21권5호
    • /
    • pp.223-229
    • /
    • 2020
  • 최근 3세대 바이오매스라고 알려진 미세조류를 이용하여 생산되는 바이오디젤은 기존의 교통수단에 사용되는 화석연료를 대체할 수 있는 유일한 재생에너지로 알려져 있다. 미세조류 중에서도 Scenedesmus obliquus는 다른 미세조류 대비 성장이 빠르고 건조세포무게 대비 지질을 40-50 % 축적이 가능하여 바이오디젤 생산에 있어 야외 및 대규모 재배에 적합한 지질생산 우수 종으로 알려져 있다. 미세조류를 이용한 바이오디젤 생산을 위해서는 높은 바이오매스 생산량 확보가 선행되어야 하며 배양공정의 제어를 위해 효과적인 세포 질량 측정 및 분석이 필요하다. 본 연구는 S. obliquus를 75일 동안 배양하며 흡광도, 현미경 이미지, 라만 분광법 등으로 미세조류의 성장 변화를 측정하고, 측정된 값들에 대한 상관관계를 관찰하였다. 배양 60일과 배양 75일 기간에, 흡광도의 변화량이 3 % 미만인 반면, 현미경으로 관찰한 미세조류의 숫자는 3배 이상 증가하였다. 또한, 라만 분광법으로 측정된 결과에서는 β-카로틴에 해당하는 997 cm-1, 1148 cm-1, 1515 cm-1의 강한 피크값이 측정되었으며, 배양 기간 동안 β-카로틴의 피크값은 초기보다 3배 이상 증가하는 것이 관찰되었다. 따라서 라만 분광법을 이용하면 미세조류 배양에서 세포 내 성장 물질과 성장 정도를 알아내어 높은 바이오매스를 생산할 수 있을 것이다.

롤러신발과 일반신발의 착용 후 보행 시 하지근의 근전도 비교 (The Effects of Wearing Roller Shoes on Muscle Activity in The Lower Extremity During Walking)

  • 채원식;임영태;이민형;김정자;김연정;장재익;박원균;진재흥
    • 한국운동역학회지
    • /
    • 제16권3호
    • /
    • pp.137-148
    • /
    • 2006
  • The purpose of this study was to compare muscle activity in the lower extremity during walking wearing jogging and roller shoes. Twelve male middle school students (age: 15.0 yrs, height 173.7 cm, weight 587.7 N) who have no known musculoskeletal disorders were recruited as the subjects. Seven pairs of surface electrodes (QEMG8, Laxtha Korea, gain = 1,000, input impedance >$1012{\Omega}$, CMMR >100 dB) were attached to the right-hand side of the body to monitor the rectus femoris (RF), vastus medialis (VM), vastus lateralis (VL), biceps femoris (BF), tibialis anterior (TA), and medial (GM) and lateral gastrocnemius (GL) while subjects walked wearing roller and jogging shoes in random order at a speed of 1.1 m/s. An event sync unit with a bright LED light was used to synchronize the video and EMG recordings. EMG data were filtered using a 10 Hz to 350 Hz Butterworth band-passdigital filter and further normalized to the respective maximum voluntary isometric contraction EMG levels. For each trial being analyzed, five critical instants and four phases were identified from the recording. Averaged IEMG and peak IEMG were determined for each trial. For each dependent variable, paired t-test was performed to test if significant difference existed between shoe conditions (p<.05). The VM, TA, BF, and GM activities during the initial double limb stance and the initial single limb stance reduced significantly when going from jogging shoe to roller shoe condition. The decrease in EMG levels in those muscles indicated that the subjects locked the ankle and knee joints in an awkward fashion to compensate for the imbalance. Muscle activity in the GM for the roller shoe condition was significantly greater than the corresponding value for the jogging shoe condition during the terminal double limb stance and the terminal single limb stance. Because the subjects tried to keep their upper body weight in front of the hip to prevent falling backward, the GM activity for the roller shoe condition increased. It seems that there are differences in muscle activity between roller shoe and jogging shoe conditions. The differences in EMG pattern may be caused primarily by the altered position of ankle, knee, and center of mass throughout the walking cycle. Future studies should examine joint kinematics during walking with roller shoes.

New Liquid Crystal-Embedded PVdF-co-HFP-Based Polymer Electrolytes for Dye-Sensitized Solar Cell Applications

  • Vijayakumar, G.;Lee, Meyoung-Jin;Song, Myung-Kwan;Jin, Sung-Ho;Lee, Jae-Wook;Lee, Chan-Woo;Gal, Yeong-Soon;Shim, Hyo-Jin;Kang, Yong-Ku;Lee, Gi-Won;Kim, Kyung-Kon;Park, Nam-Gyu;Kim, Suhk-Mann
    • Macromolecular Research
    • /
    • 제17권12호
    • /
    • pp.963-968
    • /
    • 2009
  • Liquid crystal (LC; E7 and/or ML-0249)-embedded, poly(vinylidenefluoride-co-hexafluoropropylene) (PVdF-co-HFP)-based, polymer electrolytes were prepared for use in dye-sensitized solar cells (DSSCs). The electrolytes contained 1-methyl-3-propylimidazolium iodide (PMII), tetrabutylammonium iodide (TBAI), and iodine ($I_2$), which participate in the $I_3^-/I^-$ redox couple. The incorporation of photochemically stable PVdF-co-HFP in the DSSCs created a stable polymer electrolyte that resisted leakage and volatilization. DSSCs, with liquid crystal(LC)-embedded PVdF-co-HFP-based polymer electrolytes between the amphiphilic ruthenium dye N719 absorbed to the nanocrystalline $TiO_2$ photoanode and the Pt counter electrode, were fabricated. These DSSCs displayed enhanced redox couple reduction and reduced charge recombination in comparison to that fabricated from the conventional PVdF-co-HFP-based polymer electrolyte. The behavior of the polymer electrolyte was improved by the addition of optimized amounts of plasticizers, such as ethylene carbonate (EC) and propylene carbonate (PC). The significantly increased short-circuit current density ($J_{sc}$, $14.60\;mA/cm^2$) and open-circuit voltage ($V_{oc}$, 0.68 V) of these DSSCs led to a high power conversion efficiency (PCE) of 6.42% and a fill factor of 0.65 under a standard light intensity of $100\;mW/cm^2$ irradiation of AM 1.5 sunlight. A DSSC fabricated by using E7-embedded PVdF-co-HFP-based polymer electrolyte exhibited a maximum incident photon-to-current conversion efficiency (IPCE) of 50%.

문화.생태를 이용한 도시마케팅 사례 연구 (Culture and Ecology-Oriented City Marketing: A Case Study of Gangneung City)

  • 허중욱
    • 산학경영연구
    • /
    • 제22권2호
    • /
    • pp.157-179
    • /
    • 2009
  • 이 연구는 2009년 대한민국의 저탄소 녹색시범도시로 선정된 강릉시의 녹색성장정책 사업의 사례를 조사하여 도시성장정책의 생태사업, 문화사업, 신재생에너지사업, 녹색교통사업 등 4개 부문에서 다음과 같은 시사점을 확인할 수 있었다. 첫째, 강릉시의 생태적 복원사업으로 위대한 친환경 생태복원사업은 경포해안의 불량숙박업소 철거와 이 구역에 해안송림을 재생시킨 사업이다. 둘째, 강릉시의 세계적인 문화자원은 녹색기술과 환경보전 중심의 녹색성장 정책에 대하여 문화적 다양성을 자각시키는 동인으로 작용하고 있다는 것을 확인할 수 있었다. 셋째, 강릉시는 해안을 연접하고 있고 해양이미지가 강하므로 향후 해양에너지로서 조력, 풍력, 심층수 등 다양한 사업접근이 가능하다. 넷째, 녹색교통사업으로 친환경 전력 활용, 그린카 이용 등의 사업이 추진 및 예정되어 있다. 결론적으로 강릉시의 녹색성장정책은 EcoCulture와 매우 부합하고 있다는 것을 확인할 수 있었다. 강릉시의 대다수 정책중 생태사업과 문화사업이 복합적으로 추진되고 있다는 것을 사례를 통하여 확인할 수 있었다. 이것은 강릉시와 유사한 전국의 중소도시들이 지향해야 할 저탄소 녹색도시 정책이 생태와 문화가 결합하여 시도해야 한다는 것을 의미한다. 그래서 각 도시정부는 생태적 지속성, 문화적 다양성, 경제적 유효성을 확보하도록 매진해야만 할 것이다.

  • PDF

이온선 혼합법이 도재-금속 계면 변화에 미치는 영향에 관한 실험적 연구 (AN EXPERIMENTAL STUDY ON THE ALTERATIONS OF ION-BEAM-ENHANCED ADHESIONS ON A VARIETY OF CERAMIC-METAL INTERFACES)

  • 정극모;박남수;우이형
    • 대한치과보철학회지
    • /
    • 제30권2호
    • /
    • pp.135-154
    • /
    • 1992
  • This study was performed to analyze bond strength, the alterations of the interfaces between metal films which are populary used and considered to contribute to the chemical reaction with porcelain, according to constant ion- beam- mixing, and the relation between interfacial chemical reactions and bond strength in metal/porcelain specimens. For this study, three seperate metals : selected-gold, indium and tin were chosen ; each to be bonded to a seperate body porcelain. Bonding occurs when the metal is deposited to the body porcelain using a vacuum evaporator. The vacuum evaporator used $10^{-5}\sim10^{-6}$ Torr vacuum states for the evaporation of various metals (Au, Sn, In). Ion-beam-mixing of the porcelain/metal interfaces caused reactions when the Ar+ was implanted into thin films using a 80 KeV accelerator. These ion-beam-mixed specimens were then compared with an unmixed control group. An analysis of bond strength and ionic changes between the the metal and porcelain was performed by electron spectroscopy of chemical analysis (ESCA) and scratch test. The finding led to the following conclusions : 1. Light microscopic views of the scratch test : The ion-beam-mixed Au/porcelain specimen showed narrower scratched streams than the unmixed specimen. However, the Sn/porcelain, In/porcelain specimens showed no differences in the two conditions. 2. Acoustic emissions in scratch tests : The ion-mixed Au/porcelain, In/porcelain specimens showed signals closer to the metal/porcelain interfaces than unmixed specimens. Conversely, the ion-mixed Sn/porcelain specimen showed more critical signals in superficial portions than unmixed specimens. 3. After ion- beam-mixing, the Au/porcelain specimen showed apparently increased bond strength, and the In/porcelain specimen showed very slightly increased bond strength. However, the Sn/porcelain specimen showed no differences between ion mixed specimen and the unmixed one. 4. ESCA analysis : The ion-beam-mixed Au/porcelain specimen showed a higher peak separated value (4.3eV) than that of the unmixed specimen(3.65eV), the ion-beam-mixed In/porcelain specimen showed a higher peak separated value (9.43eV) than that of the unmixed specimen(7.6eV) and the ion-beam-mixed Sn/porcelain specimen showed a higher peak separated value (8.79eV) than that of the unmixed specimen(8.5eV). 5. Interfacial changes were observed in the ion-mixed Au/porcelain, In/porcelain and Sn/porcelain specimens. Especially, significant interfacial changes were measured in the ion- mixed Sn/porcelain specimen. Tin dioxide(SnO2) and a combination of pure tin and tin dioxide (Sn+SnO2) were produced. 6. In the Au/porcelain specimen, the interfacial chemical reaction showed increased bond strength between gold and porcelain substrate. But, in the In/porcelain, Sn/porcelain specimens, interfacial chemical reactions did not affected the bond strength between metal and porcelain substrate. Especially, bonding strength on the ion mixed Sn/porcelain specimen showed the least amount of difference.

  • PDF