• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.148-149
• /
• 2012

This paper reports doping of carbon atoms in GaN layer, which based on dimethylhydrazine (DMHy) and growth temperature. It is well known that dislocations can act as non-radiative recombination center in light emitting diode (LED). Recently, many researchers have tried to reduce the dislocation density by using various techniques such as lateral epitaxial overgrowth (LEO) [1] and patterned sapphire substrate (PSS) [2], and etc. However, LEO and PSS techniques require additional complicated steps to make masks or patterns on the substrate. Some reports also showed insertion of carbon doped layer may have good effect on crystal quality of GaN layer [3]. Here we report the growth of GaN epitaxial layer by inserting carbon doped GaN layer into GaN epitaxial layer. GaN:C layer growth was performed in metal-organic chemical vapor deposition (MOCVD) reactor, and DMHy was used as a carbon doping source. We elucidated the role of DMHy in various GaN:C growth temperature. When growth temperature of GaN decreases, the concentration of carbon increases. Hence, we also checked the carbon concentration with DMHy depending on growth temperature. Carbon concentration of conventional GaN is $1.15{\times}1016$. Carbon concentration can be achieved up to $4.68{\times}1,018$. GaN epilayer quality measured by XRD rocking curve get better with GaN:C layer insertion. FWHM of (002) was decreased from 245 arcsec to 234 arcsec and FWHM of (102) decreased from 338 arcsec to 302 arcsec. By comparing the quality of GaN:C layer inserted GaN with conventional GaN, we confirmed that GaN:C interlayer can block dislocations.

• 한국분말재료학회지
• /
• 제21권3호
• /
• pp.215-221
• /
• 2014

Translucent alumina is a potential candidate for high temperature application as a replacement of the glass or polymer. Recently, due to the increasing demand of high power light emitting diode (LED), there is a growing interest in the translucent alumina. Since the translucent property is very sensitive to the internal defect, such as voids inside or abnormal grain growth of sintered alumina, it is important to fabricate the defect-free product through the fabrication process. Powder injection molding (PIM) has been commonly applied for the fabrication of complex shaped products. Among the many parameters of PIM, the flowability of powder/binder mixture becomes more significant especially for the shape of the cavity with thin thickness. Two different positions of the gate were applied during PIM using the disc type of die. The binder was removed by solvent extraction method and the brown compact was sintered at $1750^{\circ}C$ for 3 hours in a vacuum. The flowability was also simulated using moldflow (MPI 6.0) with two different types of gate. The effect of the flowability of powder/binder mixture on the microstructure of the sintered specimen was studied with the analysis of the simulation result.

• 한국염색가공학회지
• /
• 제28권3호
• /
• pp.208-218
• /
• 2016

This study investigated the effects of the working mechanisms of proteins, mordants, and dyes, as well as the mordanting order, on dye uptake by silk fabric pre-treated with proteins and dyed with freeze-dried sappan wood water extract. Soybean protein and sodium caseinate were used as the proteins. 1. When Al mordants were not used, the dyeability of the fabrics increased upon protein pre-treatment as compared to the case without treatment. 2. Dyeing with protein pre-treatment, followed by mordanting, led to the highest dye uptake, and the optimal protein concentration was 5%. 3. The K/S values slightly decreased with an increase in the dyeing temperature, and the fabric turned dark red in color when dyeing was carried out at increasing temperature. Fabrics showed the highest dye uptake at $40^{\circ}C$. 4. Regarding the effect of time, the K/S values of the fabrics with and without protein treatment showed almost no increase after the initial dyeing time of 10min; further, there was hardly any difference in the cases with and without protein pre-treatment. 5. In case of protein pre-treatment fabrics, the washing fastness was level 2. The dry cleaning fastness showed very excellent result with level 4-5. The rubbing fastness was better in dry rubbing than in wet rubbing of the fabrics. For the light fastness, all dyed fabrics showed low fastness.

• 패션비즈니스
• /
• 제4권4호
• /
• pp.1-16
• /
• 2000

The purpose of this study is to investigate the formative beauty, changes in fashion and aesthetical sense that can be seen in the bias drapings of Madeleine Vionnet and her influences on modern fashion since she used draping as a new fashion means to represent the new feminine images which modernism of the early 20th century and social changes from the two great World War's generated, and to provide proper data to encourage designers' creativity that is wanting in the circle of Korea fashion. Bias draping led women to respect worship their body from the heart with seductive modernism enriching the material's texture to the utmost through geometrical patterns of triangle, quartered plane and quardrants and simple cylindrical cuts and with an attribute adapting itself to the wearer's body. Bias draped wear consisted of light and transparent materials and overall surface decoration revealed women's movements and sought the extension of environmental movements and demonstrated its eroticism. On the other hand, biased daywear gained anonymity through cutting true to body line and psychological protective quality as of cape, and this went well with the independent femininity accepting difference as well as pursuing revolution from the inside. The great inflation and the 2nd World War gave birth to escape from reality like surrealistic artistic tendencies and Hollywood films and increased romanticism. Bias draping once underwent unpopularity except in expensive clothes due to knit wear boom and the utilization of new elastic materials, however, it began to receive lights again from pluralization waves and retro tendencies and to be introduced in many designers' collections. A young genius of England, John Galliano improved functions of Haute Couture through creation of new styles and fantastic shows to promote profits in the fashion markets. Bias draping fitted in human body line provides us comfort and aesthetic qualities through careful choice of material and elegance by delicate cutting.

• Korean Journal of Acupuncture
• /
• 제23권2호
• /
• pp.19-27
• /
• 2006

Objectives: Although Korean Acupuncture (KA) in Korean Medicine (KM) shares its origins with Traditional Chinese Medicine (TCM), it has made its own contribution to the field of acupuncture and general medicine. This study reviews characteristics of KA. Methods: Representative theories of KA were reviewed in light of a constitutionally individualized and practically integrated approach. Individualized approach in KA is based on constitutional energy traits recognized in Saam, Taegeuk, and Eight Constitution acupuncture theories. New practically integrated therapeutic modalities, such as herbal, and bee venom acupunctures, have also been developed in KA. Results: As a form of natural medicine, KA along with KM put emphasis on the vitality and self-correcting mechanism of an individual, which led to the refinement of constitutional approach. KA along with KM theories features a summarized understanding and practical application of integrated therapeutics, which produced creative development of new modalities. Conclusions: KA is expected to make significant contributions to the individualized and practical medicine, based on basic research and clinical trials.

• 동굴
• /
• 제76호
• /
• pp.37-42
• /
• 2006

The Dielectric Barrier Discharge (DBD) is a nonequilibrium gas discharge that is generated in the space between two electrodes, which are separated by an insulating dielectric layer. The dielectric layer can be put on either of the two electrodes or be inserted in the space between two electrodes. If an AC or pulse high voltage is applied to the electrodes that is operated at applied frequency from 50Hz to several MHz and applied voltages from a few to a few tens of kilovolts rms, the breakdown can occur in working gas, resulting in large numbers of micro-discharges across the gap, the gas discharge is the so called DBD. Compared with most other means for nonequilibrium discharges, the main advantage of the DBD is that active species for chemical reaction can be produced at low temperature and atmospheric pressure without the vacuum set up, it also presents many unique physical and chemical process including light, heat, sound and electricity. This has led to a number of important applications such as ozone synthesizing, UV lamp house, CO2 lasers, et al. In recent years, due to its potential applications in plasma chemistry, semiconductor etching, pollution control, nanometer material and large area flat plasma display panels, DBD has received intensive attention from many researchers and is becoming a hot topic in the field of non-thermal plasma.

• Restorative Dentistry and Endodontics
• /
• 제40권4호
• /
• pp.262-269
• /
• 2015

Objectives: The aim of this study was to evaluate the mechanical and physical properties of a newly developed fiber reinforced dental composite. Materials and Methods: Fiber reinforced composite EverX Posterior (EXP, GC EUROPE), and other commercially available bulk fill composites, including Filtek Bulk Fill (FB, 3M ESPE), SonicFill (SF, Kerr Corp.), SureFil (SDR, Dentsply), Venus Bulk Fill (VB, HerausKultzer), Tetric evoceram bulk fill (TECB, Ivoclar Vivadent), and Xtra Base (XB, Voco) were characterized. Composite samples light-cured with a LED device were evaluated in terms of flexural strength, flexural modulus (ISO 4049, n = 6), fracture toughness (n = 6), and Vickers hardness (0, 2, and 4 mm in depth at 24 hr, n = 5). The EXP samples and the fracture surface were observed under a scanning electron microscopy. Data were statistically analyzed using one-way ANOVA and unpaired t-test. Results: EXP, FB, and VB had significantly higher fracture toughness value compared to all the other bulk composite types. SF, EXP, and XB were not statistically different, and had significantly higher flexural strength values compared to other tested composite materials. EXP had the highest flexural modulus, VB had the lowest values. Vickers hardness values revealed SF, EXP, TECB, and XB were not statistically different, and had significantly higher values compared to other tested composite materials. SEM observations show well dispersed fibers working as a reinforcing phase. Conclusions: The addition of fibers to methacrylate-based matrix results in composites with either comparable or superior mechanical properties compared to the other bulk fill materials tested.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2002년도 강연요지집
• /
• pp.59-62
• /
• 2002

Wavelength selection and prediction algorithm for determining hematocrit are investigated. A model based on the difference in optical density induced by the pulsation of heart beat is developed by taking approximation of Twersky's theory on the assumption that the variation of blood vessel size is small during arterial pulsing[1]. A device is constructed with a five-wavelength LED array as light source. The selected wavelengths are two isobestic points and three in compensation for tissue scattering. Data are collected from 549 out-patients who are randomly grouped as calibration and prediction sets. The range of percent hematocrit was 19.3∼51.8. The ratio of the variations of optical density between systole and diastole at two different wavelengths is used as a variable. We selected several such variables that show high reproducibility among all variables. Multiple linear regression analysis is made. The relative percent error is 8% and the standard deviation is 3.67 for the calibration set. The relative % error and standard deviation of the prediction set are 8.2% and 3.69 respectively. We successfully demonstrate the possibility of non-invasive hematocrit measurement, particularly, using the wavelengths below 1000nm.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.144-144
• /
• 2008

Blue light emitting diode structures consisting of the InGaN/GaN multiple quantum wells were grown by metalorganic chemical vapor deposition at different growth temperatures for the p-GaN contact layers and the influence of growth temperature on the emission and microstructural properties was investigated. The I-V and electroluminescence measurements showed that the sample with a p-GaN layer grown at $1084^{\circ}C$ had a lower electrical turn-on voltage and series resistance, andenhanced output power despite the low photoluminescence intensity. Transmission electron microscopy (TEM) revealed that the intense electro luminescence was due to the formation of a p-GaN layer with an even distribution of Mg dopants, which was confirmed by TEM image contrast and strain evaluations. These results suggest that the growth temperature should be optimized carefully to ensurethe homogeneous distribution of Mg as well as the total Mg contents in the growth of the p-type layer.

• 한국통신학회논문지
• /
• 제37권4C호
• /
• pp.329-337
• /
• 2012

캡슐 내시경은 인체 내부의 소화기관 병변을 조사할 수 있는 캡슐 모양의 전자장치로서 인체 내에 케이블을 삽입하는 기존 푸시 타입(push-type)내시경과는 달리 환자에게 공포와 고통을 주지 않는 시술로 인식되고 있어, 최근 환자와 의사 모두에게 큰 관심을 끌고 있다. 이 기술은 바이오 기술(BT), 정보통신 기술(IT), 나노 기술(NT) 등의 성숙과 융합으로 2000년에 들어와 처음으로 가능하게 되었으며, LED를 포함한 광학계와 이미지 센서, 통신 모듈, 파워 모듈 등으로 구성되어 있다. 캡슐 내시경은 첨단 기술의 총체로 유비쿼터스 시대에 다양한 기술 분야의 핵심 기술을 필요로 한다. 따라서 본 논문에서는 캡슐 내시경의 구성에 관해 소개하고, 현재 데이터 전송을 위해 사용되고 있는 대표적인 RF 무선 통신 방식 및 인체 통신 시스템 방식에 대해 비교하였다. 아울러 현재 상용된 캡슐 내시경의 사양을 비교 분석하고, 미래의 캡슐 내시경의 진화 방향과 기술적 도전 과제를 제시하였다.