• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.546-547
• /
• 2010

최근 고출력 LED의 기술적 진보에 따라 여러 분야에서 LED의 적용 시도가 확산되고 있다. 그 중 LED 무대조명은 조도 제어범위가 넓어 매우 낮은 전력에서 LED를 정전류로 구동할 필요가 있다. 본 논문에서는 200Watt급 RGBW Moving Light를 매우 낮은 전력까지 구동하기 위하여 DC 전류제어 디밍 방식을 적용하였으며, 이를 위한 회로를 설계하여 이를 실험적으로 검증하였다.

• Journal of Power Electronics
• /
• v.11 no.3
• /
• pp.271-278
• /
• 2011

This paper presents a LLC resonant controller IC for secondary side control without external active devices to achieve low profile and low cost LED back light units. A gate driving transformer is adopted to isolate the primary side and the secondary side instead of an opto-coupler. A new integrated dimming circuitry is proposed to improve the dynamic current control characteristic and the current density of a LED for the brightness modulation of a large screen LCD. A dual-slope clock generator is proposed to overcome the frequency error due to the under shoot in conventional approaches. This chip is fabricated using 0.35 ${\mu}m$ BCD technology and the die size is $2{\times}2\;mm^2$. The frequency range of the clock generator is from 50 kHz to 500 kHz and the range of the dead time is from 50 ns to 2.2 ${\mu}s$. The efficiency of the LED driving circuit is 97 % and the current consumption is 40 mA for a 100 kHz operation frequency from a 15 V supply voltage.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.1
• /
• pp.104-110
• /
• 2011

High-brightness LED control is required for stable operation, thus the driver and control system must be designed to deliver a constant current to optimize reliability and ensure consistent luminous flux. In this paper, the sliding mode current controller is designed to adjust the illumination density of power LEDs. The controller design model of power LEDs, including its driving circuit, is proposed to realize the dimming control of power LEDs. A buck converter is introduced to drive the power LEDs and reduce the input voltage to a lower level. The sliding mode software controller is implemented to adjust the dimming of power LEDs. The proposed strategy for driving power LEDs is investigated and comparatively studied by experiments.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1185-1186
• /
• 2011

LED는 반도체 기술 향상에 따라 현대에 이르러 실내 외 조명으로 사용되기 이르렀다. 하지만 장수명을 갖는 구동회로의 전해 커패시터 수명이 짧기 때문에 LED 조명 자체 수명이 저감되어 질 수 있다. 수명이 짧은 전해 커패시터를 반영구적인 필름 커패시터나 마일러 커패시터로 대치하기 위해 구동회로에 커패시터 용량 저감 기법을 적용되어야 한다. 본 논문은 LED 구동회로의 PFC Bulk 커패시터 용량을 감소시키기 위해 3고조파를 입력전류에 주입하는 방법을 논의하였으며, 이를 시뮬레이션을 통하여 분석하였다.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.906-909
• /
• 2004

Status of high intensity LED, one of the recent issue in industry is reviewed. In a system view, various power supply methods for multiple array construction are introduced rather than one for single LED. Custom IC for driving LED and different circuit for applications are also considered.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3075-3077
• /
• 2000

이동통신단말기 등의 표시소자로 사용되는 LCD(Liquid Crystal Diode)나 LED(Light Emitting Diode)의 표현의 한계를 극복하고 보다 많은 정보를 표시할 수 있는 가상의 화면을 구성하기 위한 400dpi급 LED array 칩과 이를 구동하기 위한 driver 칩을 패키징하는 방법에 대하여 연구하였다. 연성 인쇄회로기판(flexible Printed Circuit) 기판 위에 칩을 실장하여 제품의 소형화와 경량화 그리고 전선을 대체하여 신뢰성을 높일 수 있도록 설계하였고 알루미늄 wire bonding법으로 각각의 칩을 연결하는데 있어 고려해야할 패키지의 조건에 대하여 연구하였다. 본 연구의 목적은 휴대용 이동통신단말기의 경박단 소화를 위한 패키징 기술을 확보하는데 있다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.6
• /
• pp.959-964
• /
• 2009

This paper dealt with the disinfection performance by Ultra-Violet Light Emitting Diode (UV LED) for a phytoplankton as a basic study for the development of a low-energy consumption ballast water treatment system. UV LEDs having peak wavelength of 255nm, 265nm and 280nm were used in the experiment. UV LED modules with driving circuit were fabricated, and optical and electrical characteristics of them were analyzed. The disinfection performance for phytoplankton depending on the UV wavelength was evaluated by comparing the number of phytoplankton before and after the UV treatments. The experimental result showed that the highest disinfection wavelength for the phytoplankton was 265nm.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2835-2838
• /
• 2003

We study the characteristics of oscillating in non-autonomous condition and the conducted noise generation in a RL-photocoupler circuit. This circuit may be shown a period-doubling and a chaos dynamics under any specific conditions of input circuit. But, the relationship between input signals and output signals is different according to the amplitude of driving input voltage. Then, the oscillation noise was analyzed with respect to both the frequency and the amplitude of an external ac signal and do values. The results show that the noise-induced oscillations for falling and rising cycles induced by kick-back effect in an inductor, nonlinear capacitance, nonlinear resistance and charge storage time in a diode and an LED. We also compared the simulation with the experimental results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4489-4493
• /
• 2014

LED light driving device has problems in efficiency and heating at higher than 150W. In addition, there is inconvenience in replacing the lighting device to another when W is not the same as the previous one. In this paper, a multi-channel LED light driver, driver embedded driver circuit in a multi-channel structure with a power system in the driver-interlocking structure was designed. With the auto control converter structure with a power efficiency above 93% and power factor above 0.98, the weight of the high efficiency LED lighting-actuating device in driver-interlocking structure, a driver in self-calibrating self-optimization structure. In this paper, at below 10% THD, the existing converter contrast weight was reduced by 40% or more.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.491-499
• /
• 2019

Recently, there has been increasing demand for power quality in power supply devices. The IEC 61000-3-2 standard requires that the AC / DC power supply for lighting meet the specifications for the power factor (PF) and total waveform distortion (THD). In addition, advanced countries in Europe are regulating the ripple rate as 15 ~ 30% for the flicker phenomenon caused by the change in the amount of foot energy due to the change in current of the output terminal. Therefore, domestic standards and regulations are being updated. This study adopted the Flyback converter to satisfy the PFC standard, and has the circuit first and second insulation function. To reduce the low frequency ripple of the LED current, Flyback, Coupled Inductor, LC parallel resonance filter, LLC resonance filter, and Cuk were simulated by PSIM to mimic each LED driving circuit. A coupled LC resonant circuit with a coupled inductor on the primary side and LC resonance on the secondary side was also proposed for output side ripple reduction.