• 반도체디스플레이기술학회지
• /
• 제20권3호
• /
• pp.167-171
• /
• 2021

The core-shell InGaN/GaN Multi Quantum Well-Nanowires (MQW-NWs) that were selectively grown on oxide templates with perfectly circular hole patterns were highly crystalline and were shaped as high-aspect-ratio pyramids with semi-polar facets, indicating hexagonal symmetry. The formation of the InGaN active layer was characterized at its various locations for two types of the substrates, one containing defect-free MQW-NWs with GQDs and the other containing MQW-NWs with defects by using HRTEM. The TEM of the defect-free NW showed a typical diode behavior, much larger than that of the NW with defects, resulting in stronger EL from the former device, which holds promise for the realization of high-performance nonpolar core-shell InGaN/GaN MQW-NW substrates. These results suggest that well-defined nonpolar InGaN/GaN MQW-NWs can be utilized for the realization of high-performance LEDs.

• 소성∙가공
• /
• 제21권2호
• /
• pp.131-137
• /
• 2012

With the advantages of power savings, increased life expectancy and fast response time over traditional incandescent bulb, LEDs are increasingly used for many applications including automotive, aviation, display, and special lighting applications. Since the high heat generation of LED chips can reduce service life, degrade luminous efficiency, and cause variation of color temperature, many studies have been carried out on the optimization of LED packaging and heat sinks. In this study, a fin expansion type cooling device using heat pipe, instead of a solid aluminum heat sink, was designed for LED security lightings based on thermal resistance analysis. Numerical analysis and experimental validation were carried out to evaluate its cooling performance.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권9호
• /
• pp.4541-4554
• /
• 2019

This paper proposes a planar projection DV-hop location algorithm (PTCDV-hop) based on the LED semi-angle at half power (SAHP, which accounts for LED SAHP characteristics in visible light communication (VLC)) and uses the DV-hop algorithm for range-free localization. Distances between source nodes and nodes positioned in three-dimensional indoor space are projected onto a two-dimensional plane to reduce complexity. Circles are structured by assigning source nodes (projected onto the horizontal plane of the assigned nodes) to be centers and the projection distances as radii. The proposed PTCDV-hop algorithm then determines the position of node location coordinates using the trilateral-weighted-centroid algorithm. Simulation results show localization errors of the proposed algorithm are on the order of magnitude of a millimeter when three sources are used. The PTCDV-hop algorithm has higher positioning accuracy and stronger dominance than the traditional DV-hop algorithm.

• Journal of Power Electronics
• /
• 제14권2호
• /
• pp.257-264
• /
• 2014

A novel converter-free AC LED driver that is highly resistant to the fluctuation of AC voltage is proposed in this study. By removing large passive components, such as the bulky capacitor and the large-value inductor, the integration of the driver circuit is enhanced while the driving current remains stable. The proposed circuit provides LED lamps with a driving current that can follow the sinusoid waveform to obtain a very high power factor (PF) and low total harmonic distortion (THD). The LED input current produced by this driving current is insensitive to fluctuations in the AC voltage. Users will thus not feel that LED lamps are flashing during the fluctuation. Experiment results indicate that the proposed system can obtain PF of 0.999 and THD as low as 3.3% for a five-string 6 W LED load under 220 V at 50 Hz.

• 한국위성정보통신학회논문지
• /
• 제7권3호
• /
• pp.41-46
• /
• 2012

LED 기반 가시광 통신 시스템은 RF통신과 달리 인체에 무해하며, 주파수 허가를 받을 필요가 없고, 보안 특성이 우수하며, 넓은 가시광 대역을 사용할 수 있는 시스템이다. 하지만 LED 발광을 조명과 광 데이터 전송으로 동시에 사용하기 위해 깜박거림 방지와 밝기 조절 기능의 구현이 요구되는데 이때 code rate의 열화가 발생한다. 따라서 고속 멀티미디어 데이터 전송을 위해 본 논문에서 가시광 통신 시스템에서 적용 가능한 line coding기법 Symbolic-PPM(Pulse Position Modulation)을 제안하고 기존의 VPPM(Variable Pulse Position Modulation) 기법과 비교하여 깜박거림 방지 및 밝기 조절 기능을 구현 한 상태에서 고속 데이터 전송을 위한 전송 효율 증가 효과를 모의실험을 통하여 검증하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.953-956
• /
• 2006

Sulfate resistance of mortar specimens with or without alkali-free accelerator exposed to sulfate solutions for 360 days was investigated. Test results confirms a negative effect of alkali-free accelerator on the sulfate deterioration, irrespective of attacking sources. Based on the ASTM C1012 expansion test, the experimental findings demonstrated that higher $C_3A$ content in cement led to the higher expansion, especially in the mortar specimens with alkali-free accelerator.

• 원예과학기술지
• /
• 제35권4호
• /
• pp.490-498
• /
• 2017

고구마 바이러스 무병주의 기내 소식물체 생장에 미치는 LED의 영향을 조사하기 위하여, '맛나미', '신천미', '연황미'의 소식물체에서 10mm 크기의 마디를 잘라 $0.2mg{\cdot}L^{-1}$ BA를 첨가한 MS배지에 배양하였다. 광질은 형광등을 대조구로 하여, 적색(660nm), 청색(460nm), 백색, 적:청(8:2), 적:청(7:3) LED를 20cm 거리에서 $150{\pm}5{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ 광합성유효광량자속(PPF)을 유지하였으며, 일장은 16/8(day/night)시간, 배양온도는 $25^{\circ}C$로 조절하였다. LED 광질에 대한 품종간 반응은 적색 LED에서 같은 방법으로 10품종의 마디배양을 하여 소식물체 생장을 조사하였다. 배양 3주 후에 줄기신장은 적색 LED에서 형광등보다 유의하게 증가하였으며, 청색광에서 가장 낮았다. 줄기두께는 적:청(7:3)과 백색 LED에서 증가하였다. 생체중 및 건물중도 적색광에서 가장 높았다. 또한 적색 LED에서 신초생육은 유의한 품종간 차이를 보였다. 줄기길이, 생체중 및 건물중 등은 '신천미', '맛나미', '신황미' 등에서 컸다. 따라서 LED 광원을 이용한 고구마 마디배양은 적색 LED에서 3주간 배양하여 5cm 이상 키운 소식물체를 토양이식하는 것이 대조구인 형광등보다 배양기간을 1주 이상 단축할 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권1호
• /
• pp.102-107
• /
• 2011

에너지 절감을 위한 백색 LED 기반 조명은 자유공간상의 광 무선통신 분야를 개척하는 기회를 제공하였다. 가시광 통신을 위한 트랜시버는 LED와 포토다이오드로 구성되므로 높은 대역폭과 신뢰성, 저 전력 등의 장점이 있어 기존의 무선통신과 양립할 수 있는 기술로 주목받고 있다. 그러나 기존의 건축물이나 배와 자동차와 같은 구조물에 조명을 이용한 통신 네트워크를 설치한다는 것은 쉬운 일이 아니다. 본 연구에서는 자동차 또는 선박의 통신망으로 갖춰진 CAN 기반의 LED 통신시스템을 제안한다. 실내무선 네트워크를 위한 CAN 인터페이스 모듈과 트랜시버를 조명 시스템에 적용 가능함을 보였다.

• 센서학회지
• /
• 제22권6호
• /
• pp.421-427
• /
• 2013

In this paper, we introduce a new synchronous visible light communication system in which the synchronizing pulse and the data bits are simultaneously transmitted using a 3-level light signal. In the transmitter, the synchronizing pulse and the data bits modulate independently two identical visible LEDs, whose output lights add in free space, make 3-level optical signal. In the receiver, a photodiode detects the light and generates a 3-level output voltage, whose positive and negative part correspond to the synchronizing pulse and the data bits, respectively. The two signals are easily separated and recovered by a simple diode circuit. This configuration provides two independent VLC channels without any multiplexing technique, simplifies the circuit design and construction of synchronous VLC systems.

• 소성∙가공
• /
• 제21권2호
• /
• pp.101-106
• /
• 2012

Generally, rapid cure reaction of LED encapsulation silicone resin causes serious defects in cured resin products such as warpage, residual bubbles, and reduced wettablility. In order to prevent residual bubbles in silicone resin, the step cure process was examined in the present paper. Three kinds of step cure processes were applied, and bubble-free phenomenon was observed. Most of the bubbles were removed under $70^{\circ}C$, the minimum temperature for activating cure reaction. In addition, degree of cure(DOC) and temperature distribution were predicted by using FEM analysis of heat transfer. It was concluded that maintaining cure temperature which provide a DOC under 0.5~0.6 effectively reduces residual bubbles.