• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.2
• /
• pp.7-12
• /
• 2007

A SPICE-based 3-dimensional circuit model of LED(Light-Emitting Diode) was developed for the design optimization and analysis of high-brightness LEDs. An LED is represented as an array of pixel LEDs with small preassigned areas, and each of the pixel LEDs is composed of circuit networks representing the thin-film layers(n-metal, n- and p-type semiconductor layers, and p-metal), ohmic contacts, and pn-junctions. Each of the thin-film layers and contact resistances is modeled by a resistance network, and the pn-junction is modeled by a conventional pn-junction diode. It has been found that the simulation results using the model and the corresponding parameters precisely fit the measured LED characteristics.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.1
• /
• pp.85-92
• /
• 2018

In this paper, we designed a 150W LED lighting SMPS circuit operating at $-40^{\circ}C$. We designed a 150W LED lighting constant current circuit for the characteristics of the SMPS and fabricated and measured. The operating temperature range for a 150W LED lighting SMPS circuit is -40 to $70^{\circ}C$ and SMPS predicted life was 1.29-2.25 years based on 24 hours. The high acceleration life test and EMI test confirmed no abnormality.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.5
• /
• pp.643-648
• /
• 2011

In this study, SMPS driven LED traffic signal light for Large-scale traffic such as railroad and airport was designed and its electrical and EMI characteristics were measured. The output current of the LED module driven by SMPS was 1.67A for AC and DC input voltage over 10V. The conducted emission measured over 0.15~30MHz frequency range was lower than the allowed quasi-peak and average level, and the radiated noise measured over 30~1000MHz frequency range showed $23.96dB{\mu}V/m$ at 59.96MHz.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.61-65
• /
• 2011

Recently, LCD (liquid crystal display) industry is needed to goods of high reliability and wide range temperature condition and it is interested in products for extremely cold condition without failure of light-up. In this experiment, we made the LED backlight unit for Automotive-navigation under the extremely cold condition. And for making this backlight unit, we used to eight side emitting type white LEDs with 3W high power LED. We could know that this backlight unit releases to 18,000 nit in 24W power consumption and start up voltage time is under the 1ms in the ambient temperature at -40.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.191-198
• /
• 2015

The purpose of this study is to develope a current variation control system appropriate to the various LED(Light Emitting Diode) lamps using current control system equipped with microcontroller based voltage regulator of power driving circuit. For this, we will suggest a stable control system of current variation to enable a stable power-supply and current-control, consisting of circuit to minimize the affects on the LED forward voltage using variable resistance and compensating resistance. The method of constant current circuit and energy savings using microcontroller based voltage regulator suggested in this study can be applied to various a big capacity LED lamp to minimize the unnecessay heat generation and to control resistace delicately. Ultimately, we expect the results of this study will upgrade the reliability of LED lamp by supplying the current stably.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.11
• /
• pp.6-17
• /
• 2015

In this paper, colors of broadcast lightings composed of Red, Green, and Blue LED(Light Emitted Diode) can be linearly and quantitatively controlled in low illuminance. Because LED cannot emit uniform illuminance in low illuminance, the colors of RGB LED are unmixable. Furthermore, the illuminances are nonlinear with the dimming values of the RGB LED due to the nonlinearity of the output illuminance with the current through the LED. This nonlinearity generated errors of the target colors and illuminances. The proposed algorithm set up the target colors, which is expressed by the color coordinates in CIE 1931 color space, and the target illuminances. Then the illuminances of RGB LED were calculated using color mixing theory. The calculated illuminances determined the dimming values of the RGB LED for transmission via DMX512 communication. After the broadcasting lighting received the dimming values of the RGB LED via DMX512 communication,.RGB LED can emit target color and illuminance, and be controlled by calculating the PWM(Pulse Width Modulation) duty ratio of the hybrid LED driver which be considered the nonlinearity for the illuminances of the LED. As a result, the proposed algorithm can linearly and quantitatively control the colors and illuminances in full range of illuminance. Then we verify experimentally that the errors of the emitted color coordination x, y and illuminance are 2.27%, 3.6% and 1.5%, respectively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.2
• /
• pp.73-79
• /
• 2014

Visible light communication is a communication method using an LED having a high-speed ON / OFF rate data to be transmitted, it is used as a wireless high speed data transmission. VLC system evolves, the problem of basic research is intended to improve performance and ensure reliability of the communication. The nature of the visible light communication, communication is performed only in the reach of the light, which indicates a big difference by the emission angle of the light. Therefore, in this paper, in the case of indoor environments generally, with the attributes of the multiple LED is equipped, was applied to a MIMO (Multiple Input Multiple Output) communication system. and analyzed SNR performance and total power can be obtained on the reception side by changing the emission angle of the transmitter. As a result of the simulation was run against this, it was confirmed that there is a significant impact on the performance of BER and SNR performance by the emission angle of the transmitter.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.5
• /
• pp.961-966
• /
• 2012

In this paper, we analyze a main patent positioning to analyze data based on patent application as stage of data collection to organize knowledge map of LED through patent application. We also analyze the present condition of patent application for technology sector. We propose basic data to make knowledge map through the analysis of technical distribution for applicant by each country.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.323-324
• /
• 2008

This study implemented the LED lighting control system using Zigbee Communication. We designed a desk lamp using LEDs. The PWM signals control LEDs using LED drivers. A desk lamp received PWM signals using Zigbee protocol to control LED Color, Color temperature and brightness. Zigbee protocol that have such several advantages to existent Home network system can upgrade more interface dimension.

• Journal of the Optical Society of Korea
• /
• v.19 no.6
• /
• pp.586-591
• /
• 2015

In recent years, along with the rapid development of LED technology, indoor positioning systems based on visible light communication (VLC) have been researched. In this paper, we propose an accurate indoor positioning method using white-light LEDs and a dual image sensor. Indoor LED lights are located at the ceiling in a room and broadcast information on their positions using VLC technology. A mobile device with a dual image sensor receives LED position information by VLC and estimates its position and azimuth angle. Simulation and experimental results are given to show the performance of the proposed indoor positioning system.