• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.6
• /
• pp.281-285
• /
• 2010

We propose new identification method of LED location in indoor environment. It can transmit and receive position information and additional data, as applying OOK-SS watermarking method for LED transmission signal. Especially, we use a unipolar form code for watermarking spread code, because LED signal has unipolar characteristic. we analysis LED signal influence and interference with watermarking code, demonstrate usefulness of LED-ID using OOK-SS Watermarking.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.5
• /
• pp.933-940
• /
• 2017

This thesis shows the emotional light that stabilizes various human heart rates through the three elements of LED. This experiments confirm the change of heart rates when subjects see the static LED, fluid LED That was controlled by the guitar chord and beat in a given music and without light Consequently, the experiment proved that the bpm slope of test subject during specific time in liquid LED, -12.85, was steeper than -12.05 in static LED and -11.05 without light, which showed that fluid LED is more effective to stabilize heart rate than other conditions.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.5
• /
• pp.587-592
• /
• 2015

According to increase in the use of the LED, the demand for low power consumption LED display design of the controller block has increased. In this paper, the low power LED controller block was designed through the power source supply that leads adiabatic operation from constant current source circuit operated by digital signal control. The proposed circuit was implemented using a 0.35um CMOS process. and it demonstrated linear operation of the circuit. From the simulation result, the proposed circuit was evaluated with about 82% power consumption reduction effect in comparison with conventional LED controller block. This research is expected to be helpful for the low power operation and the solution for heat problem of LED display.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.235-242
• /
• 2014

LED lighting control technique is one of the ongoing research areas for efficient management of LED lighting. In this paper, we design and implementation of LED street lighting remote control system which have a wired and wireless communication function for LED street lighting remote control. The implemented system can automatically dimming and individual(or consolidated) LED street lighting via RS-485/422 or Wi-Fi. In experimental results, the implemented remote control system was satisfactory for all of the desired functions.

• Proceedings of the IEEK Conference
• /
• 2000.06e
• /
• pp.89-92
• /
• 2000

A wire communication module for PLC controller was developed. This system consists of RF module interface part, RS232 serial communication control part, LED display part and control S/W with GUI interface. RF communication frequency is controlled by PLL controlling and communication rate is also controlled as 1200 and 4800 bps. Communication and control status are displayed on LED. As a S/W part, graphic user interface on Window 95 O.S. was developed. To show the validity of the developed system, severial communication and control of PLC system were experemented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.11
• /
• pp.755-762
• /
• 2014

In recent year, along with the rapid development of LED technology, many applications using LEDs with Visible Light Communication(VLC) have been researched. Since it is easy to provide LOS communication environment along with cheap deployment cost, the indoor positioning system based on VLC has been actively studied. In this paper, we propose an accurate indoor positioning algorithm using a stereo image sensor and white-light LEDs with the visible light communication. Indoor white-light LEDs are located at the ceiling of a room and broadcast their position information by VLC technology. Mobile receiver with stereo image sensor receives LED position information by VLC and estimates its position and angle information. Simulation results are given to show the efficiency of proposed indoor positioning algorithm.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.5
• /
• pp.415-425
• /
• 2016

This paper presents the results of a study on the control system for an underwater manipulator controlled by a master arm through LED communication. The underwater manipulator was designed to be actuated by electric motors with six degrees of freedom for operation in various underwater environments. The master arm, which can remotely control the manipulator, was designed with a structure similar to the manipulator for convenient control. An underwater LED communication system was developed to communicate between the master arm and underwater manipulator. An integrated control program was developed that included data conversion, monitoring, datalogging, and filtering. Some experiments were performed to verify the performance of the developed control system of the master arm, manipulator, and LED communication system, and the results are presented.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.1
• /
• pp.62-67
• /
• 2016

In this paper, the IES file was measured by applying a secondary optical lens to a 21 W LED engine, and the lighting calculation software RELUX was used to perform simulations with the data file of this measurement. For two-lane (two way) concrete paved roads, six LED engine are applied to each streetlight and simulation results show that Uo (uniformity) 0.56, UI (longitudinal uniformity) 0.86 and TI (threshold iIncrement) 9% which satisfies the required standards. RELUX was also used to LED streetlights by designing them in three dimensions, that is ${\pm}25%$ of the arm length of 2.8 m standardized by the road lighting standards of the Korea Expressway Corporation. Comparative analysis was carried out on adjustments were made in increments of 0.1 m that Uo, UI, and TI values in the range of arm lengths from 2.1 m~3.5 m. For the arm length range of 2.1 m~2.4 m, Uo was high, whereas UI was low. Therefore, we present the optimal light distribution values designed for an arm length of 2.5 m.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.10
• /
• pp.759-765
• /
• 2012

In this paper, a temperature control for LED (light emitting diode) lamp using a cooling fan is studied. An efficient temperature control scheme for the LED lamp using the fan wind at the lowest sound noise is studied. For the study, after measurement of the minimum sound noise of the fan and related temperature of the LED lamp through tests, experiments on temperature control of the LED lamp using the fan with various size of heat sinks was performed. To reduce the fan sound noise, a method of reducing the operation time with optimal size of the heat sink was studied. Also, a control of LED lamps using RF communication was studied.

• Journal of Advanced Navigation Technology
• /
• v.20 no.1
• /
• pp.99-106
• /
• 2016

Wearable display market is a consistently growing field to handle a smart device with ease. Wearable display is an efficient device that can show the information to the user. In this paper, propose the scheme of a wearable display using LED and implement it including controlling remotely with BLE. Traditional outdoor LED display requires the dedicated controller and its software. Therefore, to control those LED display, it should implement a driver and its own way of communication. The proposed method is to ensure the independence and extensibility by separating driver module and communication module for controlling LED display. In addition, by adopting a short-range communication with Bluetooth 4.0 and a LED driver with low-power technology, it can be showed to control system configuration and display with a smart device.