• 폴리머
• /
• 제36권6호
• /
• pp.761-767
• /
• 2012

본 연구에서는 압출 컴파운딩 공정 및 압축 성형 공정을 이용하여 직하형 LED backlight unit(BLU)용 PC계 확산판을 제조하였다. 광 확산제로 무기 실리카 다공체의 적용을 시도하였으며, 제조된 확산판의 광학 및 열적, 기계적 물성의 변화를 조사하였다. 모폴로지 관찰을 통하여 광 확산제가 압출 공정 중 발생된 높은 전단응력에 의하여 PC 매트릭스 상에서 응집 현상 없이 균일하게 분산되었음을 확인하였다. 실리카 다공체를 보조 확산제로 첨가한 경우 확산판의 위치 및 시야각에 따른 휘도 균일도가 순수 아크릴 비드만을 첨가한 경우에 비해 뚜렷하게 향상되었으며, 반면에 절대휘도의 감소 정도는 매우 낮은 것으로 나타났다. 또한 첨가된 실리카 다공체는 확산판의 열 및 기계적 성질의 개선에도 기여하였다.

• 한국조명전기설비학회지:조명전기설비
• /
• 제19권1호
• /
• pp.15-21
• /
• 2005

이제까지 주로 LCD가 대화면화가 진행될 때 CCFL의 기술 개발 동향을 살펴 보았다. CCFL lamp는 LCD module의 BLU에서 광원으로 중요한 자리를 차지해 왔고, 원가 절감 및 성능향상이라는 목표로 지속적으로 기술 개발이 되어 왔다. 하지만 현재 LCD TV가 FPD 시장의 주도적인 역할을 하기 위해서 혁신적인 기술 개발이 요구되어서 EEFL, FFL, LED 광원, CNT 광원 등의 다양한 형태의 광원이 CCFL의 자리를 넘보고 있는 실정이다. 이에 CCFL 메이커들 또한 다른 광원들의 장점을 CCFL 내에서 구현하고, 자신만이 가지고 있는 기술로 주력광원으로서의 자리를 잃지 않기 위해 기술 개발이 더욱 빠르게 이루어져 가고 있다.

• 세라미스트
• /
• 제21권1호
• /
• pp.55-63
• /
• 2018

Recently, display technology has been focused in regard with with color reproduction, contrast ratio, image resolution and color bit. Among these technologies, the color reproducibliity of White, Red, Green, and Blue is associated with the TV plaform and is expressed as a major technology. Major TV platforms are divided into three categories since 2015, including LCD-based phosphor coverted LED BLU technology, QD sheet technology using nano-sized quantum dots, and OLED technology. In this paper, we describe the color reproducibility definition and background, luminescent materials with wide color gamut, color reproducibility of TV display performance, and discuss about next luminescent materials.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2010년도 춘계학술발표대회
• /
• pp.482-485
• /
• 2010

LED 기술의 발전을 통해 이를 이용한 LCD 에서의 local-dimming 기술이 명암 비 향상, 소비 전력 절감을 위해 많이 연구되었다. 이러한 local-dimming 을 구현할 때 기존의 방법들은 주변(인접) 블록들로부터의 밝기 영향을 고려하지 않아 과도한 밝기 제어가 됨으로써 부정확하다. 하지만 local-dimming 을 이용하더라도 백라이트 유닛(BLU)의 제어 가능 범위의 제한으로 인해 제어의 효율은 개선할 여지가 많이 남아있다. 본 연구에서는 정확한 백라이트 제어를 위하여 주변 밝기를 고려하는 Cooperative Dimming 방법을 제안하며 본 제안 기술을 통해 픽셀의 최대 밝기를 최대한 만족하여 오류를 최소화 가능한 최소전력 소비를 하는 제어방법을 보인다.

• 한국생산제조학회지
• /
• 제22권2호
• /
• pp.263-267
• /
• 2013

The continuing demand for increasingly slimmer and brighter liquid crystal display (LCD) panels has led to an increased focus on the role of light guide panels (LGPs) or optical films that are used to obtain diffuse, uniform light from the backlight unit (BLU). The most basic process in the production of such BLU components is the micromachining of V-shaped grooves. Thus, given the current trend, micromachining of V-shaped grooves is expected to play increasingly important roles in today's manufacturing technology. LCD BLUs comprise various optical elements such as a LGP, diffuser sheet, prism sheet, and protector sheet with V-shaped grooves. High-aspect-ratio patterns are required to reduce the number of sheets and enhance light efficiency, but there is a limit to the aspect ratio achievable for a given material and cutting tool. Therefore, this study comprised a series of experimental evaluations conducted to determine the machining limit in microcutting V-shaped grooves on electroless nickel plated die materials when using single-crystal diamond tools with point angles of $20^{\circ}-80^{\circ}$. Cutting performance was evaluated at various cutting speeds and depths of cut using different machining methods and machine tools. The experimental results are that V-shaped patterns with angles of $80^{\circ}$ or up can be realized regardless of the machining conditions and equipment. Moreover, the feed rate has little effect on machinability, and it is thought that the fly-cut method is more efficient for shallow patterns.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.115-116
• /
• 2012

The demand for flexible electronic systems such as wearable computers, E-paper, and flexible displays has increased due to their advantages of excellent portability, conformal contact with curved surfaces, light weight, and human friendly interfaces over present rigid electronic systems. This seminar introduces three recent progresses that can extend the application of high performance flexible inorganic electronics. The first part of this seminar will introduce a RRAM with a one transistor-one memristor (1T-1M) arrays on flexible substrates. Flexible memory is an essential part of electronics for data processing, storage, and radio frequency (RF) communication and thus a key element to realize such flexible electronic systems. Although several emerging memory technologies, including resistive switching memory, have been proposed, the cell-to-cell interference issue has to be overcome for flexible and high performance nonvolatile memory applications. The cell-to-cell interference between neighbouring memory cells occurs due to leakage current paths through adjacent low resistance state cells and induces not only unnecessary power consumption but also a misreading problem, a fatal obstacle in memory operation. To fabricate a fully functional flexible memory and prevent these unwanted effects, we integrated high performance flexible single crystal silicon transistors with an amorphous titanium oxide (a-TiO2) based memristor to control the logic state of memory. The $8{\times}8$ NOR type 1T-1M RRAM demonstrated the first random access memory operation on flexible substrates by controlling each memory unit cell independently. The second part of the seminar will discuss the flexible GaN LED on LCP substrates for implantable biosensor. Inorganic III-V light emitting diodes (LEDs) have superior characteristics, such as long-term stability, high efficiency, and strong brightness compared to conventional incandescent lamps and OLED. However, due to the brittle property of bulk inorganic semiconductor materials, III-V LED limits its applications in the field of high performance flexible electronics. This seminar introduces the first flexible and implantable GaN LED on plastic substrates that is transferred from bulk GaN on Si substrates. The superb properties of the flexible GaN thin film in terms of its wide band gap and high efficiency enable the dramatic extension of not only consumer electronic applications but also the biosensing scale. The flexible white LEDs are demonstrated for the feasibility of using a white light source for future flexible BLU devices. Finally a water-resist and a biocompatible PTFE-coated flexible LED biosensor can detect PSA at a detection limit of 1 ng/mL. These results show that the nitride-based flexible LED can be used as the future flexible display technology and a type of implantable LED biosensor for a therapy tool. The final part of this seminar will introduce a highly efficient and printable BaTiO3 thin film nanogenerator on plastic substrates. Energy harvesting technologies converting external biomechanical energy sources (such as heart beat, blood flow, muscle stretching and animal movements) into electrical energy is recently a highly demanding issue in the materials science community. Herein, we describe procedure suitable for generating and printing a lead-free microstructured BaTiO3 thin film nanogenerator on plastic substrates to overcome limitations appeared in conventional flexible ferroelectric devices. Flexible BaTiO3 thin film nanogenerator was fabricated and the piezoelectric properties and mechanically stability of ferroelectric devices were characterized. From the results, we demonstrate the highly efficient and stable performance of BaTiO3 thin film nanogenerator.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.99-102
• /
• 2009

The recent LCD TV market has made efforts to produce thinner, brighter, and clearer products, and experienced the rapid light source replacement from a line source of light CCFL to a point source of light LED. In particular, LGP(Light Guiding Panel) among key parts composing BLU(Back Light Unit) has limits of the injection molding technology as well as the mold design, its processing and manufacturing technology so that it is hard to produce large LGP over 40 inch. To produce large light-guide panels over 40 inch under the injection molding process, a mold 3D model was developed in the design process before manufacturing a mold and structure unification was processed through CAE analysis. As a result, it was possible to construct the mold design process, and it is expected to manufacture the optimized mold by applying the mold design and manufacturing process of large-scale rapid injection-compression molding that will be produced in the future.

• 조명전기설비학회논문지
• /
• 제26권6호
• /
• pp.87-93
• /
• 2012

In this paper, we propose an analog-to-digital converter to set the address of a I2C slave chip. The proposed scheme converts a fixed voltage between 0 and VDD to the digital value which can be used as the address of the slave chip. The rising time and the falling time are measured with digital counter in a serially connected RC circuit, while the circuit is being charged and discharged with the voltage to be measured. The ratio of the two measured values is used to get the corresponding digital value. This scheme gives a strong point which is to be implementable all the parts except comparator using digital logic. Although the method utilizes RC circuit, it has no relation with the RC value if the quantization error is disregarded. Experimental result shows that the proposed scheme gives 32-level resolution thus it can be used to configure the address of the I2C slave chip.

• 한국분말재료학회지
• /
• 제22권3호
• /
• pp.169-174
• /
• 2015

The optical film for light luminance improvement of BLU that is used in LCD/LED and retro-reflective film is used as luminous sign consist of square and triangular pyramid structure pattern based on V-shape micro prism pattern. In this study, we analyzed machining characteristics of Cu-plated flat mold by shaping with diamond tool. First, cutting conditions were optimizing as V-groove machining for the experiment of micro prism structure mold machining with prism pattern shape, cutting force and roughness. Second, the micro prism structure such as square and triangular pyramid pattern were machined by cross machining method with optimizing cutting conditions. Burr and chip shape were discussed with material properties and machining method.

• 한국산학기술학회논문지
• /
• 제18권8호
• /
• pp.41-47
• /
• 2017

새로운 기술의 도입과 정교함이 더해진 최근의 지상무기가 지능형 포탄의 발달로 이어졌으며 주요 선진국의 관심을 이끌었다. 본 연구에서는 회전운동을 하는 비행체에 대한 공력 데이터를 확보하기 위해 BLU-103 모델을 통한 전산유체역학해석을 수행하였다. 먼저 회전하는 비행체의 정상해석 기법을 모사하기 위해 동체는 고정시키고 주변의 공기를 회전시켜 동체가 회전 하는 것과 같은 원리를 이용하였다. 회전운동 하는 비행체의 공력 타당성을 검토하기 위해 단순형상에 대해 받음각 0도에서 90도, 옆 미끄럼각 0도에서 90도까지 각각 30도 간격으로 고려하여 해석을 수행하였다. Drag book에 제시되어 있는 항력 값을 통해 단순모델에 대한 항력계수가 1.0 ~ 1.2의 정량적 결과를 만족한다는 사실을 확인하였다. 단순형상에서의 해석조건을 통해 검증 된 유효한 입력 값을 동일하게 실제형상에 적용하여 회전 유무에 따른 공력데이터베이스를 구축하였고 경향성을 분석하였다. 분석 결과 단순모델 뿐 아니라 실제 모델의 회전 시 축력계수, 수직력 계수, 측력 계수가 증가한다는 사실을 확인 하였고 특히 수직력 계수의 영향이 크게 작용되어 비행에 유리할 것이라 판단하였다.