• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.205-208
• /
• 2008

In this paper, we have measured and compared the optical and electrical characteristics of LED(light emitting diode) and CNT(carbon nano-tube) lightings. Especially, the IES format files are used for each of the luminaire LlD(luminous intensity distribution) analysis and light level simulation for analyze the maximum, minimum, and average light level. In the future, when CNT and the LED based lighting technology standards are writing, this data will be used in judging.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.12
• /
• pp.23-30
• /
• 2009

LEDs are increasingly used for many applications including automotive, aviation, display, transportation and special lighting applications. Generally, the RGB multichip LED luminaire applied to signboard, emotional lighting system and display device and the white LED luminaire applied to general lighting system. white LED spectra for general lighting should be designed for high luminous efficacy as well as good color rendering. This paper describes characteristics of LED luminaire white LED and RGB multichip LED. Two type of LED luminaire prototype used experiment physical, electrical and optic test and performance analyzed. RGB multi-chip and phosphor-type white LED luminaire were analyzed by experiment on their color characteristics and luminous efficacy of radiation, distribution curve, and electrical characteristics. Research work is in progress to develop an improved performance for optic and electrical works well for two type of LED luminaires.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2559-2564
• /
• 2010

The indoor and outdoor lighting industry has become the bigger and more systemized using the semiconductor LED with each control R(Red), G(Green), B(Blue). The communication standard DMX512(ANSI E1.11) protocol of it can control and perform max. 512 lightings, especially 170 lightings in 24 bit true color. As the performance of below 100 lightings is distinguished small-size, this paper proposes a bigger capacity lighting performance above 1,000 using connection to 1 master to 32 slaves. Also, this paper proposes the synchronization method in order to accomplish a designed performance. In proposed method, the master sends the synchronization signal to slaves every 400ms. Slaves receive this signal and use to initialize the timer becoming the basis of DMX512 output. The example of the developed products using proposed method and the operation is introduced.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.2
• /
• pp.185-196
• /
• 2020

Low-pressure sodium lamps, high-pressure sodium lamps and fluorescent lamps etc are mainly used tunnel lighting in Rep. of Korea. Power rates for tunnel lighting are known to account for the highest percentage in the tunnel maintenance costs. Therefore, tunnel lights are being replaced by LED that have advantages such as low power consumption and longevity. To analysis effect of replacement low pressure sodium lamp with LED, illumination and monthly power usage for a year are investigated for 8 tunnels. Power usage for tunnel lighting is decreased by 26.1% to 59.6%, and illumination is increased by 34.1% to 293% replacing low pressure sodium lamp with LED.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.4
• /
• pp.211-220
• /
• 2021

Low-pressure sodium lamps, high-pressure sodium lamps, and fluorescent lamps are mainly used for tunnel lighting in Rep. of Korea, which accounts for the highest percentage in the tunnel maintenance costs. Therefore, tunnel lights are being replaced by LED lamp that have advantages with respect to low power consumption and sustainability. To analyze the effect of replacement high pressure sodium lamp with LED lamp, illumination and monthly power usage per year have been investigated for 10 tunnels. The usage of LED lamp results in illumination improvement from 27.9% to 490% and power saving around average 47.1%.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.660-662
• /
• 2022

Due to the prolonged aftermath of COVID-19, the number of modern people suffering from stress and mental illness is increasing. Recently, various methods of color therapy are being studied using LED lighting to improve concentration, relieve stress, manage skin, and improve sleep quality. In this paper, pulse waves are measured and heart rate variability is extracted using a PPG (Photoplethysmogram) sensor to analyze a person's mental and physical state. Using RGBLED and Arduino, we propose a mood lighting system that automatically changes colors according to changes in mental and physical conditions by producing color lighting of various wavelengths, which are mainly used to stabilize the mental state.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.05a
• /
• pp.179-181
• /
• 2009

보안구역의 외곽울타리지역의 경비체제를 인적경비에서 과학화경비로 전환함에 따라 CCTV 카메라 및 모니터 기능이 보다 향상되고 있는 반면에 이에 따른 조명설비의 중요성이 인식되었다. 그러므로 본 논문에서는 보안구역 내 과학화된 보안시스템에 적합한 조명개선을 위하여 기존 시설된 고압나트륨과 시범 설치된 LED 광원 및 조명등주의 위치를 변경하면서 조도를 실측하였다. 또한 CCTV 감시 화면의 특성을 고려하여 정확한 물체를 확인 할 수 있는 명암을 유지하기 위한 조명 값을 구하기 위하여 시뮬레이션을 실시하여 조도 개선안을 제시하고자 한다.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05a
• /
• pp.27-29
• /
• 2010

본 논문은 DMX-512 프로토콜에서 모든 조명등을 직렬 연결하는 주소 자동할당(Address Auto-Allocation) 방안을 소개한다. 조명 산업의 통신 표준인 DMX512(ANSI E1.11) 프로토콜은 기본적으로 조명등을 구별할 수 있는 주소가 필요하다. 기존의 방식은 이 주소를 조명등에 어떠한 형태(DIP Switch, EEPROM에 저장)로든 할당하고 서로를 구별하여, DMX512 통신 데이터에서 자신의 색상 데이터를 얻을 수 있다. 또한, DMX512 프로토콜의 전기적인 특성상 조명등 32대 마다 분배기가 필요하다. 본 논문은 DMX512 프로토콜에서 모든 조명등을 직렬로 연결하여 주소 자동할당 기능을 갖게 함으로써 단말기 주소 부여에 대한 불편함을 해소하고, 분배기의 사용 또한 필요 없게 하였다. 본 논문에서 제안한 방안을 반도체 LED 조명등에 적용하여 ON-OFF제어, 디밍제어, 순차제어, 무지개제어 등이 동작하는 것을 확인하였다.

• Smart Media Journal
• /
• v.5 no.4
• /
• pp.103-110
• /
• 2016

This study aims to establish the standards to give the design weight in case when developing equipment designs, by classifying products with similar purposes in accordance with the morphological characteristics and also extracting the typicality. Limiting the sampling group for the extraction of the typicality to a pendant-type and a ceiling buried-type through the preceding case study and consultation with experts, the survey was conducted for majors and relevant workers in six cities, sampling products released in Korea and Japan before May 2016. The 1st survey was about the Morphological classification, and the 2nd times about the extraction of the typicality while the 3rd one was about the classification of the morphological attributes. By drawing the design attributes based on the functional/morphological classification and formative principles, it aimed to establish the base of the future research on the measurement of design weight. The results of this study aim to efficiently establish the roles of design technology in accordance with changes in the lighting fixture market caused by the substitution of light sources, and also to draw the development direction to rapidly cope with the accelerated changes in lighting design types and corporate R&D.