• Photonics industry news
• /
• s.63
• /
• pp.18-19
• /
• 2011

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4489-4493
• /
• 2014

LED light driving device has problems in efficiency and heating at higher than 150W. In addition, there is inconvenience in replacing the lighting device to another when W is not the same as the previous one. In this paper, a multi-channel LED light driver, driver embedded driver circuit in a multi-channel structure with a power system in the driver-interlocking structure was designed. With the auto control converter structure with a power efficiency above 93% and power factor above 0.98, the weight of the high efficiency LED lighting-actuating device in driver-interlocking structure, a driver in self-calibrating self-optimization structure. In this paper, at below 10% THD, the existing converter contrast weight was reduced by 40% or more.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.10
• /
• pp.983-988
• /
• 2016

Internet of Things Iranian people and things, things and things are connected through the Cloud. It can significantly save energy through a combination of LED lighting as a new ICT technologies and industry-to provide a human-centric, eco-friendly, and the content is embedded multifunction solutions that meet your needs, environment, implementation time according to user requirements, technology It can be systematized as converged next-generation lighting. In this paper, we have developed regarding whether the building in relation to the LED lighting control system using smart devices and Cloud-based user as a human connection through the board to the Arduino Yun lit LED lighting, wireless smart device or to the Cloud or off. After the Arduino Yun is connected to the Internet, taking the current date and time information from the Linux shell command used the way coming across the bridge (BRIDGE) its value.

• The Optical Journal
• /
• s.145
• /
• pp.36-40
• /
• 2013

LED(light emitting diode)는 반도체의 P-N 접합 다이오드의 일종으로, 순방향으로 전압이 걸릴 때 단파장 광이 방출 되는 현상인 전기발광 효과를 이용한 화합물 반도체 소자의 일종으로 발광 다이오드라고도 한다. LED는 화합물 반도체의 화합물의 종류 및 조성비를 조절하여 적외선, 자외선과 빨강에서 보라에 이르는 모든 가시광선이 구현 가능하고, 소비전력이 기존의 광원에 비해 우수한 특성을 가지고 있어, 일반 조명, 산업용 조명, 전광판, TV의 BLU 등 여러 분야에 걸쳐 다양하게 이용되고 있다.

• The Optical Journal
• /
• s.149
• /
• pp.18-25
• /
• 2014

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.3
• /
• pp.1-7
• /
• 2015

Korea's electricity supply and demand policy has focusing on electricity demand side management instead of the expanding supply and a lot of effort for LED(Light Emitting Diode) at the time. This paper calculated the optimal subsidy for LED spread. For this purpose, it analyzed the impact on spread of the lighting appliances each subsidy level from BDM(Bass Diffusion Model) and predicted the number of lighting appliances according to subsidy level in the future. The case study is calculated susidy for satisfaction of LED target using the suggested model in the future and verified availability.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.1
• /
• pp.66-74
• /
• 2013

• Journal of IKEEE
• /
• v.16 no.3
• /
• pp.274-282
• /
• 2012

In this paper, we propose the design of lighting control algorithm for intelligent LED lighting system. The proposed lighting control algorithm transmitted to MCU through a data bus the environmental information detected from respectively sensor node. The MCU control software was designed to determine the level maintained to depending on the set control method by comparing the results that calculated the dimming level using a signal value. Also, it was designed to be lighting by cross-performed periodically the rotation and reverse method by created fully symmetrical pattern using the control algorithm to LED lighting device. In this paper, the proposed lighting control algorithm improved the reliability of the data sent by designed the system that can be controlled lighting to stable, and it was maintained the event delivery ratio of 91%. Also, the lighting device was decreased the luminous intensity of 32%, the power consumption of 49%, and heat generation of 32%. As a result, it were could be improved the energy efficiency that the life-cycle of LED has been increased 50%.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.12
• /
• pp.54-59
• /
• 2011

LED lightings typically do not fail catastrophically during use. However, over time the light output will gradually depreciate. Even if there are same LED lighting, they are so different at all. because of dissimilar the use and environment of each LED lighting. In this paper, we make a description of reliability analysis procedures for the degradation data using collected field data. Reliability analysis procedures are consisted of estimating degradation models and failure time, verification of distribution and parameters of the distribution, and reliability measures estimation. At some point in time, the light emitted from an LED lightings depreciates to a level where it is no longer considered adequate for a specific application.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.81-83
• /
• 2005

반도체 기술의 발전으로 기존에 전자회로 부품으로 사용되던 LED(Light Emitting Diode)는 차세대 조명용 광원으로 대두되고 있다. LED는 소비전력이 작아 에너지를 절약할 수 있을 뿐만 아니라 수명이 길어 유지보수 비용이 획기적으로 줄어든다. 현재 신호등과 같은 지시용 조명기기를 대체할 광원으로 다양한 시도가 이루어지고 있다. LED는 자체적인 발열은 적지만 주변온도에 민감하게 광도가 변화한다는 단점을 가지고 있다. 높은 온도는 LED의 수명에도 영향을 미쳐 열화를 빨리 가져오게 된다. 따라서 정전류제어를 통해 LED의 전류를 일정하게 하고 온도변화에 영향을 받지 않고 광도를 일정하게 유지하여야 한다. 본 논문에서는 정전류 구동회로에 열화로 인한 LED의 수명의 연장하기 위해 온도변화에 따라 LED의 구동전류와 일정한 광출력을 유지하기 위한 제어회로를 제안하였다. 제안한 제어회로는 시뮬레이션을 통해 타당성을 검증하였다.