• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.01a
• /
• pp.163-164
• /
• 2020

교통 신호등 자동 제어시스템 기술은 교통 체증 현상을 방지하고 횡단 보도를 건너는 보행자들의 안전을 목적으로 시작되었다. 이는 1가구당 2차량에 가까운 보급률을 보이고 있는 현대 사회에 불가피하게 생기는 문제인데 본 연구에서는 이러한 문제로 인한 교통 신호등 자동 제어시스템 기술을 적용하고자 한다. 사거리에서 운전을 하다 보면 차량이 많이 지나가는 차선이 있는 반면 비교적 차량이 많이 지나가지 않는 차선들을 볼 수 있다. 이런 경우 차량이 많은 차선은 신호시간 내 차량이 모두 지나가지 못해서 교통체증이 발생하게 된다. 교통 체증을 최소화하기 위해서 압력 센서를 설치하여 차량이 많이 정체 되고 있는 차선에 신호의 시간을 증가시켜주고 차량이 많이 없는 차선은 기본 신호의 시간을 주어 차량이 많이 있는 차선의 차들의 교통 체증을 해소시켜 준다. 그리고 차량이 많이 지고 스마트폰의 보급이 많아지다 보니 횡단 보도에서 스마트폰을 보고있다 횡단 보도에서 사고를 당하는 경우 증가하고 있다. 이러한 보행자들을 위해 횡단 보도의 신호가 초록불이 되었을 때 간단한 음악이 나오고 발 밑에 횡단 보도 신호등과 같은 색깔이 나오게 하는 LED를 설치한다. 이렇게 하여 초록불이 들어왔다는 것을 보행자들에 인식시켜 보행자들의 안전을 지킬 수 있다.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.2
• /
• pp.101-107
• /
• 2014

This study is proposed the novel PPG sensor device and the signal processing method to replace the acceleration sensor that is used to reject motion artifacts contained in photoplethysmography(PPG). The proposed method is to reject motion artifacts by an adaptive filter based on the estimated motion artifact by using a blue LED light. To evaluate the performance of the proposed method experimentally, We did design a novel sensor consisted of blue/red LEDs and photo-sensor and implemented, and then rejected the motion artifacts by using an adaptive filter and the implemented sensor. In the results of the experiments, it is shown that the proposed sensor device and signal processing can reconstruct the PPG signal despite the occurrence of motion artifacts, and also that the SNR was 4.5 times of moving average filter. According to the experimental results, the proposed method can be applied to design a low-cost device.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.5
• /
• pp.587-592
• /
• 2015

According to increase in the use of the LED, the demand for low power consumption LED display design of the controller block has increased. In this paper, the low power LED controller block was designed through the power source supply that leads adiabatic operation from constant current source circuit operated by digital signal control. The proposed circuit was implemented using a 0.35um CMOS process. and it demonstrated linear operation of the circuit. From the simulation result, the proposed circuit was evaluated with about 82% power consumption reduction effect in comparison with conventional LED controller block. This research is expected to be helpful for the low power operation and the solution for heat problem of LED display.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7B
• /
• pp.606-612
• /
• 2012

Visible light communications (VLC) uses modern solid-state LEDs to broadcast information. Emerging white-light LEDs allows the combination of lighting and optical wireless communication in one optical source. In this paper, a new LED lighting using one-chip-type white LED is proposed for efficient illumination and optical wireless communications. Performance analysis such as horizontal illuminance, 3-dB cut-off frequency, inter-symbol interference, signal-to-noise ratio and bit-error rate shows the effects of the shapes of LED lighting. Performance of the proposed LED lighting under the existence of obstacles is superior to that of the existing LED lighting in illumination and optical wireless communication.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.205-210
• /
• 2014

This is concerned with the technology to display the design on Porcelain and adjust malfunction for moving effect and light intensity by curator. More precisely, the technology makes it possible that the porcelain is connected to Light module which is the device for controlling light emission and rotating rolling plate, etc that are connected to LED light module, optical fiber and controller that is for scenario from the given storytelling. In addition, with a WiFi portable device (Smart-phone, other mobile device). equipped with a scenario programs, information for operation, failure and malfunction can be obtained and analyzed in real-time, and menu color and alarm is alerted when the displaying design is in abnormal status, which makes the early reactions to the status. Furthermore, the collected data can be sent through WiFi network to the device and PC managed by the curator specialized in managing the design on the Porcelain, thus the technology could help the curator who have less knowledge about moving pattern on the Porcelain. There is always a possibility of malfunction due to various condition that are caused by wring-harness when modules are wired-connected. In this research, in order to overcome this problem, we propose a system configuration that can do monitoring and diagnosis with a device for collecting data from LED control module, Light emission sensor and a personal WiFi device. Also, we performed connection between optical Fiber and LED and interlock for the system defined by the definition for information and storytelling scenario.

• Journal of Satellite, Information and Communications
• /
• v.9 no.4
• /
• pp.69-72
• /
• 2014

Recently, lighting systems using audio signal of audible frequency and frequency spectrum of visible lighting are studied. And various related products are being sold and released commercially. Also demands of emotional matching algorithm and system which includes effective and methodical designs are being increased. And the importance related with this scheme has increased. In this Paper, we configures a system for digital sound source based LED color control. And we develop algorithm to control LED color for the system configuration. Also we demonstrated the usefulness of the algorithm through experiment with simulation using LED color control system. We expected to be useful in a variety of fields and applications using proposed digital music based LED color control system.

• The Korean Fashion and Textile Research Journal
• /
• v.20 no.1
• /
• pp.101-107
• /
• 2018

The purpose of this study is to develop the electroconductive textiles based on polyurethane(PU) nanoweb and to explore that it is applicable to smart clothing. The electroconductive textiles developed by coating 2.0 wt% aqueous dispersed non-oxidized graphene paste on the surface of PU nanoweb. The fabricated electroconductive nanoweb was applied as a transmission line to connect the LED lamp, and the brightness of the LED lamp was measured to confirm its performance. The nanoweb transmission line was fixed by two methods(seam sealing tape, embroidering) to connect the LED lamp and AA batteries. The results as follows, the brightness of the LED lamp fixed with seam sealing tape was about 82 lux, and which fixed with embroidering was about 57 lux. It represents that the nanoweb transmission line which fixed with the seam sealing tape has better electrical signal transmitting because the lux value higher than the one fixed by embroidering. In order to compare the performance of the nanoweb transmission line and the metal wire, we connected the LED lamp with copper wire. The brightness of copper wire connected LED lamp was about 193 lux. Although the electrical signal strength of the nanoweb transmission line was weaker than the copper wire, it was reachable to operate LED lamp. The results of this study will provide a basic data to develop the textile based electronic devices, and conducting wire for smart clothing.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.63-68
• /
• 2017

In this paper, Distance recognition measurement using distance calculation correction algorithm, was realization through LED dimming control. The calculation values for the RSSI average filtering and the RSSI feedback filtering were calculated and applied to reduce the error of the RSSI value measured from a long distance. It was confirmed that the RSSI values through the average filtering and the RSSI values measured by setting the coefficient value of the feedback filtering to 0.5 were ranged from -61 dBm to - 52.5 dBm, which shows irregular and high values decrease slightly as much as about -2 dBm to -6 dBm as compared to general measurements. A distance calculation correction algorithm to improve the accuracy was applied, which confirmed that as the distance increases, the range of errors decreases. In conclusion, unstable signals were corrected using the RSSI measurement result filtering, and the distance calculation correction algorithm was applied and performed to reduce the range of errors. In addition, RGB colors were implemented by LED to indicate the distance determination and the signal stability.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1298-1299
• /
• 2015

이동 로봇의 자기 위치 인식 방법으로 GPS를 많이 이용하지만 건물 내부공간에서는 위성신호 수신 장애가 있기 때문에 GPS 사용이 어렵다. 이에 대한 대안으로 다양한 형태의 실내 측위 기술에 관한 연구가 진행되어왔다. 최근에는 WiFi를 이용한 방법이 일부 상용화 되고 있으나 정밀도가 3~5m라는 한계가 있으며, LED 조명을 이용한 방법은 실용화 단계에 이르지는 못했지만 많은 연구가 진행되고 있다. 당 연구실에서도 LED조명을 기반으로 한 실내위치 인식 시스템을 개발하였으며, 지난 연구에서는 이를 이용한 이동로봇의 자율주행을 연구하였다. 본 연구에서는 지난 연구에 덧붙여 두개의 수신부를 이용하여 로봇의 방향인식오류 개선 및 이동 로봇의 자율주행을 보여주고자 한다. 제시된 시스템은 이동로봇, 조명제어장치 그리고 컴퓨터로 구성된다. 이동로봇은 상용화된 마이크로 마우스에 탑재된 조명신호 수신장치를 통하여 자신의 위치와 방향을 감지하며, 컴퓨터와의 Wi-Fi 통신으로 자신의 위치를 컴퓨터에 전송하거나 위치 명령을 수신한다. 컴퓨터에서는 수신 받은 이동로봇의 위치를 실시간으로 화면에 표시하며, 이동로봇에 전달할 위치명령을 사용자가 입력하는 기능을 제공한다. 사용자가 이동경로를 설정한 후 이동로봇으로 명령을 보내면 로봇은 자신의 위치와 목적지를 비교하며 자율주행을 하게 된다. 실험을 통하여 확인한 결과 지난연구의 방향인식의 문제점이 해결되어 제시된 시스템으로 실내공간에서도 이동로봇의 자율주행이 원만히 이루어짐을 확인하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.8
• /
• pp.700-705
• /
• 2013

If LED lighting is to be used in home networking, a home gateway and power line communication are needed in delivering data. In addition, an appropriate multiple access scheme reflecting LED's property is required. In this paper, a home networking system that can serve wide in-building area by integrating PLC and VLC, is proposed and implemented, then its performance is measured. A binary CDMA is used in the multiple access since this scheme is good for nonlinear device like LED, while infrared is used in the upstream transmission.