• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.10
• /
• pp.13-20
• /
• 2010

Until now, dimmable fluorescent luminaires has been widely used for dimming systems, and LED is currently attracting attentions as a alternative lamp due to environmental problem issues. LED, one of eco-friendly high efficiency lamp, has advantage that dimming is easy than fluorescent luminaire. But there have been not enough research on technical development and application for LED dimming. Therefore, to analyze luminous quantity of dimmable LED, the illuminance, color temperature, luminance, and current were measured in the whole range of dimming. In the results of this study, the dimmable LED of various types showed a similar trend in the changed luminous quantity by dimming.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.2
• /
• pp.24-31
• /
• 2011

The purpose of this study is to find an efficient way using dimmable LED lamps to describe specific target illuminance and color temperature. This study used 14 dimmable LED lamps as same or different color temperature. The method of study is to measure of electric power consumption using different color temperature of dimmable LED lamps that were combination of two or three dimmable LED lamps by simultaneously dimming. Through this method, the electric power consumption was compared with all combinations of the illuminance and color temperature.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.110-110
• /
• 2003

LED의 품위가 높아지고 고 광방출을 위한 전기적 출력이 높아질수록 LED 자체에서 발생하는 열이 아주 중요한 요소로 제출되고 있다. 본 실험에서는 여러 가지 LED 모델의 열적특성을 분석하여 가장 최적화된 모델을 생성하려고 한다 실험방법은 유한요소법을 사용하는 소프트웨어 ANSYS를 이용하여 여러 가지 LED 모델을 생성하고 입력조건과 경계조건을 집어넣고 해석한 후 결과를 분석하여 각종 모델의 최고 온도를 알 수 있다 그 다음 여러 가지 모델의 최고 온도를 비교하여 가장 최적화된 LED모델을 발견하고 또한 열적으로 영향 주는 요소들을 도출 해낼 수 있다. 이러한 분석은 금후 고휘도 LED램프생산성에 중요한 기반기술로 사료된다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.1
• /
• pp.1-8
• /
• 2011

In this paper, the method to calculate chromaticity coordinate from spectral power distribution of LED is presented. Also, inverse tri-stimulus algorithm to find mixed luminance of red, green, blue LED from targeted luminance and chromaticity coordinate is proposed. Besides, digital light color control system of LED lamp applied this algorithm has been developed. In experiments, each chromaticity coordinate of red, green, blue LED calculated from this algorithm has relative percentage error of few % to measured values. Digital code is drawn from inverse tri-stimulus algorithm, and measured values of luminance and chromaticity coordinate of LED lamp digitally controlled by this code also have relative percentage error within a few % to targeted luminance and chromaticity coordinate.

• Journal of Bio-Environment Control
• /
• v.22 no.4
• /
• pp.400-407
• /
• 2013

This study was performed to analyze the effect of light quality of discharge lamp on growth and phytochemicals contents of lettuce (Lactuca sativa L. cv. Jeokchima) grown under metal halide (MH) lamp, high-pressure sodium (HPS) lamp, and xenon (XE) lamp in a plant factory. Cool-white fluorescent (FL) lamp was used as the control. Photoperiod, air temperature, relative humidity, $CO_2$ concentration, and photosynthetic photon flux (PPF) in a plant factory were 16/8 h (day/night), $22/18^{\circ}C$, 70%, 400 ${\mu}mol{\cdot}mol^{-1}$, and 200 ${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, respectively. MH lamp had the greatest fraction of blue light (400-500 nm) of 23.0%. However, HPS lamp had the lowest fraction of 4.7% for blue light and the greatest fraction of 38.0% for red light (600-700 nm). At 11 and 21 days after transplanting, leaf length, leaf width, leaf area, shoot fresh weight, and shoot dry weight of lettuce as affected by the light quality of the discharge lamp were significantly different. The leaf area of lettuce grown under HPS, MH, and XE lamp increased by 45.7%, 16.3%, and 9.5%, respectively, as compared to the control. These results were similar for shoot fresh weight. Growth characteristics of lettuce grown under HPS lamp increased since HPS lamp had more fraction of red light. However, growth of lettuce grown under MH and XE lamp decreased since they had more fraction of blue light. As compared to the control, the ascorbic acid in lettuce leaves grown under discharge lamp decreased. The greatest anthocyanins accumulation of 0.70 mg/100 g was found at MH treatment. Anthocyanins content in lettuce leaves grown under XL and HPS lamp were 79.3% and 8.6%, respectively, compared with the control. Growth and phytochemicals contents of lettuce were highly affected by the different spectral distribution of the discharge lamp. These results indicate that the combination of discharge lamp or LED lamp for enhancing the light quality of discharge lamps is required to increase the growth and phytochemicals accumulation of lettuce in controlled environment such as plant factory.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2009.05a
• /
• pp.135-138
• /
• 2009

포토닉 의류는 의류에 다양한 광원과 광전달 소재를 적용하여 빛을 발현하는 디지털 기술을 적용하여 의류의 색채를 제어함으로써 착용자의 감성을 시각화할 수 있도록 하는 스마트 의류의 일종이다. 앞서 개발한 포토닉 의류의 중 LED램프와 광섬유의 조합으로 색광을 발현하는 기능은 특별히 RGB 색조합을 통해 의도하는 색채를 다양하게 구현할 수 있다는 특징이 있다. 현재 색채 발현 방법은 Red, Green, Blue의 3가지 색상의 LED의 적절한 조합을 통하여 색채를 발현하는 방식을 가지고 있으나 색체계 상의 기준 색상과 실제 발현되어 육안으로 확인되는 색채의 차이가 있어 의도와는 다른 색채가 나타나 디자이너의 색채 기획의도를 포토닉 의류에 적용하기 힘들며, 기존의 색체계에 의해 생산된 다른 텍스타일 색채와의 컬러 조합에 있어서 필요한 정확한 데이터를 얻기 어렵다. 따라서, 포토닉 의류에 의도하는 색채를 발현하기 위해서는 기존 색상과의 차이점 보정과 효과적인 데이터 베이스 구축이 필요하다. 본 연구에서는 포토닉 의류의 색채에 관한 보다 체계적인 연구를 통해 웹 컬러와 광섬유를 이용한 포토닉 컬러에서의 색채 이미지를 비교, 분석하고 RGB값과 색차값을 통한 차이점 보정을 참고하여 광섬유를 사용하여 제작되는 스마트 포토닉 의류의 제작 시 색채선정 기획에 있어서 기초적인 자료로 활용될 수 있도록 제시하고자 한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1038-1042
• /
• 2003

LED(Light Emitting Diodes)를 이용한 LCD 백라이트는 현재까지 모바일용의 $2{\sim}3$ 인치정도의 소형모델에서 상용화되고있다. 현재 동종분야에서 $5{\sim}7$ 인치 이상의 중대형에서는 아직 검토나 개발단계인 것으로 파악되고 있다. LED의 특징인 장수명, 고색순도, Robustness 등의 장점에도 불구하고 광효율이나 경제적측면에서 아직 형광램프 Type 에 비해 개선점이 남아있는 것도 개발지연 이유중의 하나다. 최근에 일부 광원업체에서 소비전력 5W로 높은 출광효율을 갖는 고휘도를 가진 LED가 개발되고있다. 고색재현성을 요구하는 TV등의 민수용 디스플레이시장이 커지는 현 추세에 한 방법으로 3색의 고휘도 LED광원을 사용한 백 라이트를 개발했다. R(Red), G(Green), B(Blue)의 3색 점광원 다수를 이중도광판 구조의 장변에 일정 간격으로 배열하여 최종 출사면에서 백색이 되도록 소정의 구성비로 설계하였다. 점광원간의 간격으로 인해 발생되는 혼색도를 보완하기위해 광원과 출사면까지의 광경로를 점광원이 아닌 튜브형의 형광광원 사용시보다 일정량 길게 설계해야 되는데, 이것으로 인해 출광효율이 형광램프구조에 비해 떨어지는 결과로 나타났다. 본 연구에서는 17인치 모니터구조의 백라이트에서 색재현성 105%와 소비전력 67W에서 표면휘도 $2000cd/m^2$ 정도를 달성하였다.

• Journal of IKEEE
• /
• v.21 no.4
• /
• pp.368-374
• /
• 2017

In this Paper, we developed a low power type LED security light using LED lighting that substitutes a 220[V] commercial power source for a solar cell module instead of a halogen or a sodium lamp. in addition, a PWM type drive control circuit is designed to minimize the heat generation problem and the drive current of the LED drive controller. in developed system, The light efficiency measurement value is 93.6[lm/W], and a high precision temperature sensor is used inside the controller to control the heat generation of the LED lamp. In order to eliminate the high heat generated from the LED lamp, it is designed to disperse quickly into the atmosphere through the metal insertion type heat sink. The heat control range of LED lighting was $50-55[^{\circ}C]$. The luminous flux and the lighting speed of the LED security lamp were 0.5[s], and the beam diffusion angle of the LED lamp was about $110[^{\circ}C]$ by the light distribution curve based on the height of 6[m].

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1484-1488
• /
• 2009

This thesis is about Heat-sink design which is considered as the biggest problems for commercialization of LED lighting and suggests how to solve the problems though analysis on heat-sink using COMSOL. The temperature difference after simulation value and modelling was $10^{\circ}C$by Transient analysis of Heat Transfer Module which is in the COMSOL Multiphysics. The result approximated the object which is close to actual lighting, when various elements are used according to temperature change of interior and exterior surroundings LED lighting is set up.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.1
• /
• pp.38-41
• /
• 2010

Compared to conventional molding technology, the color uniformity of light direction emitted from LED is improved with PCB type lead frame technology in which metal thin film is used and transfer molding technology which makes the density of phosphor uniform by manufacturing high density LED lamp. The light efficiency and the color uniformity of the LED are improved by molding the phosphor layer outside of chip and controlling the thickness of the phosphor layer. CIE x,y difference of LED in major axis is also improved uniformly from 0 to 90 degrees.