• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.12
• /
• pp.38-43
• /
• 2013

In this paper, the location measurement method for the reliable location data using ultrasonic sensors is proposed for the dimming control of the LED flat lamp. The measurement errors depending on the reflection angle of the object have to be considered to obtain the reliable location data in the ultrasonic sensors. In the experiment, the cause of the measurement errors depending on reflection angle is analyzed and velocity change of ultrasonic wave depending on reflection angle is measured. And the location measurement method depending on velocity change of ultrasonic wave is proposed. From the results, the average absolute deviation of the x-coordinates was 1.47cm when the location measurement method was considered, and it was closer to the true values than the average absolute deviation of the x-coordinates which was 5.89cm without regard to the reflection angle.

• Journal of the Korean Chemical Society
• /
• v.50 no.2
• /
• pp.137-140
• /
• 2006

In this report, Europium doped strontium barium gallium silicate ((Sr,Ba)2Ga2SiO7:Eu2+) phosphor has been synthesized by conventional solid-state method and investigated luminescent characteristic. Appropriate proportions of the raw materials were mixed in an agate mortar with acetone to obtain starting mixtures. Also, this phosphor was prepared by simple process under the reduction atmosphere (25% H2/75% N2). This phosphor can be applicated to the green phosphor for white LED because it has green emission band (513 nm), which emits efficiently under the 405nm excitation energy.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.10
• /
• pp.65-72
• /
• 2015

Recently, LED light has been increasingly adopted for vehicles in both domestic and foreign automotive markets, while a variety of LED lights have been developed to be used particularly for headlamps. In this paper, we propose an H-type resonant snubber circuit topology for high efficiency of vehicle LDM (LED Driver Module) and realized LDM functions for vehicle headlamp by designing high-efficiency convertors. In addition, this study reduced the financial burden by configuring the system to control the whole with micom except for the use of individual dedicated chips to drive LED for high and low beam. In order to verify the validity of the proposed H-type resonant snubber capable of soft switching, simulations were performed using PSIM. As a result, the validity was experimentally verified by creating a prototype. Moreover, in order to actually attach the headlamp, the performance of the proposed convertor was confirmed by designing LDM to the limited size. Communications between the headlamp and higher controller were realized using LIN(Local Interconnect Network).

• The Magazine of the IEIE
• /
• v.37 no.8
• /
• pp.86-94
• /
• 2010

본 논문에서는 전류 제어 방식을 갖는 DC-DC 변환기에 사용되는 기울기 보상회로에 있어서 가변적으로 동작하는 기울기 보상회로를 제안하였다. 시비율이 50% 이상으로 동작하는 DC-DC 변환기의 시스템의 안정도를 유지하기 위해서는, 램프 기울기 보상회로가 반드시 필요하다. 고정적인 기울기의 보상은 동작 범위를 제한하게 된다. 제안된 가변 기울기 보상회로는 넓은 범위의 입력 전압과 출력 전압에 적합하도록 설계 되었으며, LED 드라이버 응용분야에 적용하기 위한 DC-DC 변환기에 사용되었다. 동작을 검증하기 위하여, 0.35-um BDC 공정으로 회로를 제작하여 측정하였다.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.06a
• /
• pp.184-184
• /
• 2011

함정용 형광등기구는 설치되는 위치에 따라 매입형, 노출형, 램프 수에 따라 2등용과 3등용, 글로브형태에 따라 투명, 반투명으로 분류된다. 본 논문은 기존의 형광등기구를 LED로 교체하기 위한 기초 실험으로 이들 등 기구의 소비전력, 총광속, 색온도 및 빔각 등 전기 광학적 특성을 분석하였다.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1255-1255
• /
• 2015

HID 조명램프에 의해 방사되는 전자파를 1GHz에서 2.5GHz 대역에서 측정하였다. 이 대역의 전자파적합성 규격은 정해져 있지 않으나, 각종 전파기기의 장해요인으로 대두될 수있다. 본 측정 결과는 방전등의 특성으로 인해 시간별로 차이가 매우 크게 발생됨을 확인할 수 있었다.

• The Science & Technology
• /
• v.32 no.4 s.359
• /
• pp.78-79
• /
• 1999

삼익전자는 램프나 LED가 주종을 이루는 소자의 소재를 확대하고 에너지를 절약할 수 있는 12색상 플랩전광판을 개발해 연간 2백50억의 매출을 기록한 업계의 선두주자이다. 플랩방식은 가시각도가 ±85도로 훨씬 넓기 때문에 전광판의 옆쪽에서도 화면을 볼 수 있는 장점을 지니고 있다. 특히 삼익전자는 개발에서부터 생산, 시운전, 설치까지 전과정을 수행하는 일괄 생산체를 갖춰 미래가 밝은 기업으로 꼽힌다.

• Korean Chemical Engineering Research
• /
• v.58 no.3
• /
• pp.486-492
• /
• 2020

The method for preparing a perovskite-type bismuth ferrite (BFO) photocatalyst which reacts to visible LED light and the characteristics of visible light photocatalysis were investigated. BFO was prepared according to the sol-gel method. The prepared BFO consisted mainly of BiFeO₃ structure and formed a nano-sized crystal including Bi₂₄Fe₂O₃₉ structure. The BFO nano crystallines were identified from the UV-visible diffuse reflectance spectra to absorb UV and visible light up to about 600 nm. The bandgap of the BFO determined from the diffuse reflectance spectrum was about 2.2 eV. Formaldehyde was decomposed by the photoreaction of BFO photocatalysts with the visible light LED lamps with wavelengths of 585 nm and 613 nm. The narrow bandgap of BFO led to elicit BFO photocatalytic activity in visible LED light.

• Journal of computational fluids engineering
• /
• v.18 no.1
• /
• pp.63-68
• /
• 2013

The purpose of this study is to investigate the cooling performance of radial heat sink used for high power LED lightings by natural convection cooling with surrounding air. Experimental and numerical analyses are carried out together. Parametric studies are performed to compare the effects of geometric parameters in radial heat sink such as the number of fins, fin height, fin length, and thickness of fin base as well as the surface coatings of radial heat sink. In this study, the cooling of 60 W LED lamp is examined with radiative heat transfer considered as well as natural convection. Numerical results show the optimum condition when the number of fin is 40, heat sink height is 120 mm, fin length is 15 mm, and fin base thickness is 3 mm. The difference in temperature of the LED metal PCB is within $1^{\circ}C$ between numerical analyses and experimental results. Also, the CNT coating on the heat sink surface is found to increase the cooling performance significantly.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.129-132
• /
• 2009

공항내 설치된 보안등의 운용실태를 조사하고 인적경비에 맞춘 보안등 설계에서 첨단의 CCTV 카메라 및 주변기기를 이용한 과학화된 경비체제에 맞는 안정된 보안등 설계가 요구되어진다. 본 논문에서는 과학화된 보안시스템에 맞는 조명 설계을 위하여 단방향 투사용 LED 램프를 이용한 등기구와 2.5m 높이의 폴로 현장에 이동 배치하여 적용하였으며, 기존 시설된 고압나트륨과 시범 설치원 LED 광원의 조도 및 눈부심을 비교하여 최상의 CCTV 감시 화면의 특성파악 및 정확한 물체를 식별 할 수 있는 조도을 유지하여 안정된 보안등의 조명설비를 제시하고자 한다.