• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.381-384
• /
• 2005

Driver IC is one of the key components on the LCD monitor and LCD/TV. The function of the driver IC is to transfer and forward the input signals to LCD panel module. Inside driver IC, there are several operating units which process the input signals and generate the appropriate size and resolution to the LCD panel module. LCD panel module will display these input signals. However, there are some difficulties which driver IC designer, LCD monitor and LCD/TV maker will face. Thus, this article addresses the function and difficulties on driver IC.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.5
• /
• pp.571-577
• /
• 2004

The impact behavior of TFT-LCD module is very complicated because the module is assisted with three parts such as back light unit, LCD Panel and top chassis. Especially, the back light unit is constructed with several small and thin parts made by plastics or steels. The design of the back light unit is very important because the recent demand is more lighter, thinner and narrower module. The aim of the present study is the investigation of mechanical characteristics during impact loading. The back light unit must assist TFT-LCD Panel made by glass and guide qualification of handling environment. This paper focus on the dynamic behavior of module and carries out a series of computer simulation using LS-DYNA program. Comparing with test results previously performed, dynamic characteristics of TFT-LCD module are estimated.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.4
• /
• pp.249-256
• /
• 2007

AIn this paper, a new desist of LDI controller IC for general purpose is proposed for driving the LDI(LCD Driver Interface) controller in $4{\sim}9$ inches sized portable small-medium TFT-LCD(Thin Film Transistor addressed -Liquid Crystal Display) panel module. The designed LDI controller was verified on the FPGA(Reld Programmable Gate Array) test board, and was made the interactive operation with the commercial TFT-LCD panel successfully. The purpose of design is that it is standardized the LDI controller's operation by one LDI controller for driving all TFT-LCD panel without classifying the panel vendor, and size. The main advantage for new general-purpose LDI controller is the usage for the desist of all panel's SoG(System on a Glass) module because of the design for the standard operation. And in the previous method, it used each LDI controller for every LCD vendor, and panel size, but because a new one can drive all portable small-medium sized panel, it results in reduction of LDI controller supply price, and manufacturing cost of AV(Audio Video) board and panel. In the near future, the development of SoG IC(Integrated Circuit) for manufacturing more excellent functional TFT-LCD panel module is necessary. As a result of this research, the TFT-LCD panel can make more small size, and light weight, and it results in an upturn of domestic company's share in the world market. With the suggested theory in this paper, it expects to be made use of a basic data for developing and manufacturing for the SoG chip of TFT-LCD panel module.

• The Journal of the Korea Contents Association
• /
• v.10 no.5
• /
• pp.62-69
• /
• 2010

LCD panel need BLU(Back Light Unit) that is outside source of light because can not emit light voluntarily. BLU is used in LCD module and is used in tester that examine LCD panel's badness. Lately, BLU had changed from CCFL(Cold Cathode Fluorescent Lamp) to LED(Light-Emitting Diode) fast. CCFL need extra-high tension power and produce much heat and is difficult to keep fixed brightness. LED is few electric power wastage and keeps fixed brightness. But, BLU that is used to detector that examine the LCD module is using CCFL until recently. This paper develops LED BLU that can examine LCD panel's badness. Also, this manufactures LED BLU to 24 inch size to examine all LCD panels(12~24 inch), and develops so that LED BLU may operate according to LCD panel's size.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.3
• /
• pp.310-321
• /
• 2019

Objectives: The purpose of this study was to investigate types and characteristics of chemical substances used in LCD(Liquid crystal display) panel manufacturing process. Methods: The LCD panel manufacturing process is divided into the fabrication(fab) process and module process. The use of chemical substances by process was investigated at four fab processes and two module processes at two domestic TFT-LCD(Thin film transistor-Liquid crystal display) panel manufacturing sites. Results: LCD panels are manufactured through various unit processes such as sputtering, chemical vapor deposition(CVD), etching, and photolithography, and a range of chemicals are used in each process. Metal target materials including copper, aluminum, and indium tin oxide are used in the sputtering process, and gaseous materials such as phosphine, silane, and chlorine are used in CVD and dry etching processes. Inorganic acids such as hydrofluoric acid, nitric acid and sulfuric acid are used in wet etching process, and photoresist and developer are used in photolithography process. Chemical substances for the alignment of liquid crystal, such as polyimides, liquid crystals, and sealants are used in a liquid crystal process. Adhesives and hardeners for adhesion of driver IC and printed circuit board(PCB) to the LCD panel are used in the module process. Conclusions: LCD panels are produced through dozens of unit processes using various types of chemical substances in clean room facilities. Hazardous substances such as organic solvents, reactive gases, irritants, and toxic substances are used in the manufacturing processes, but periodic workplace monitoring applies only to certain chemical substances by law. Therefore, efforts should be made to minimize worker exposure to chemical substances used in LCD panel manufacturing process.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.7 s.184
• /
• pp.130-137
• /
• 2006

TFT-LCD(Thin Film Transistor Liquid Crystal Display) module is representative commercial product of FPD(Flat Panel Display). Thickness of TFT-LCD module is very thin. It is adopted for major display unit for IT devices such as Cellular Phone, Camcorder, Digital camera and etc. Due to the harsh user environment of mobile IT devices, it requires complicated structure and tight assembly. And user requirements for the mechanical functionalities of TFT-LCD module become more strict. However, TFT-LCD module is normally weak to high level transient mechanical shock. Since it uses thin crystallized panel. Therefore, anti-shock performance is classified as one of the most important design specifications. Traditionally, the product reliability against mechanical shock is confirmed by empirical method in the design-prototype-drop/impact test-redesign paradigm. The method is time-consuming and expensive process. It lacks scientific insight and quantitative evaluation. In this article, a systematic design evaluation of TFT-LCD module for mobile IT devices is presented with combinations of FEA and testing to support the optimal shock proof display design procedure.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.2
• /
• pp.140-145
• /
• 2001

The tape carrier package(TCD) is one of the most important components in a liquid crystal display(LCD) module. It has a role to transmit electrical signals from a printed circular board(PCB) to a display panel. If TCP is damaged under mechanical shock, the signals can not be transmitted to the panel and as a result, some dead lines are generated on the panel. This kind of phenomenon is commonly called as 'line defects'. In this paper, new structural design concepts of TCP are proposed to guarantee its reliability by using Taguchi's approach and dynamic FE-analysis. The line defects problem of TCP module is solved by replacing the original TCP with the newly designed one.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.12
• /
• pp.84-91
• /
• 2010

The bonding process of LCD panel is attaching an inner lead to an outer lead in the production line of LCD panel module. It is composed of an OLB process and a PCB bonding process. Since bonding tool assembly is one of the core parts of the bonding equipment that determines the durability and performance of the final product, much design efforts to enhance uniformity and efficiency of the process have been made. In this paper, FE analyses have been employed to determine the bonding tool size. Bonding tool of long bar shape has been simplified as a piece with same heater pitch, and appropriate boundary conditions such as convection and radiation are considered. Thermal analysis results by the FEM have been validated by the experiments. With the use of FE analysis varies design parameters and the corresponding effects have been evaluated. It was observed that the approach presented in this paper could be employed for the design of LCD module bonding tool.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.13-20
• /
• 2010

The development of the console for exterior advertizing LCD Panel(LCD Console) is the purpose of this study with regard to importance of display industry. In this study, the most important point is to develop the cooling system for LCD Console. It is developed by using systematic application techniques and statistical tests and analysis to integrate commercial components, cooling fan, heat sink, thermo electronic modules etc, of it. This study, at first, shows design/manufacturing process of the cooling system and the setting process of control factors to control through experimentation. Next, after constructing the complete console, 46 inch LCD Panel and the cooling system are built in, the performance test of it is shown through experimentation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.489-493
• /
• 2005

TFT-LCD(Thin Film Transistor Liquid Crystal Display) module is representative commercial product of FPD(Flat Panel Display). Thickness of TFT-LCD module is very thin. It is adopted for major display unit for IT devices such as Cellular Phone, Camcorder, Digital camera and etc. Due to the harsh user environment of mobile IT devices, it requires complicated structure and tight assembly. And user requirements for the mechanical functionalities of TFT-LCD module become more strict. However, TFT-LCD module is normally weak to high level transient mechanical shock. Since it uses thin crystallized panel. Therefore, anti-shock performance is classified as one of the most important design specifications. Traditionally, the product reliability against mechanical shock is confirmed by empirical method in the design-prototype-drop/impact testredesign paradigm. The method is time-consuming and expensive process. It lacks scientific insight and quantitative evaluation. In this article, a systematic design evaluation of TFT-LCD module for mobile IT devices is presented with combinations of FEA and testing to support the optimal shock proof display design procedure.