• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.419-423
• /
• 2004

This paper shows a new concept of digital power meter based on the optical sensing technique. The digital power meter with isolate IC so called Photocoupler is designed and implemented. The system composed of power and analong interface circuits, micro-controller and LCD display circuits. The most errors in power meter happen on measurement and calculation process for load voltages and currents. The suggested method on this paper is to use no noise sensor and PIC microprocessor. The results of simple test for power meter prototype are showed a nearly similar date to commercial product.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.510-514
• /
• 1997

The thin film that is electrically conductive and optically transparent is called conductive transparent thin film. ITO(Indium-Tin Oxide) which is a kind of conductive transparent thin film has been widely used in solar cell, transparent electrical heater, selective optical filter, FDP(Flat Display Panel) such as LCD(Liquid Crystal Display), PDP(Plasma Display Panel) and so on. Especially in PDP, ITO films is used as a transparent electrode in order to maintain discharge and decrease consumption power through the improvement of cell structure. In this study, we prepared ITO by reactive r.f. sputtering with indium-tin(Sn 10wt%) alloy target instead of indium-tin oxide target. The ITO films deposited at low temperature 15$0^{\circ}C$ and 8% $O_2$. Partial pressure showed about 3.6 Ω/$\square$. At the end of firing, the resistance of ITO was decreased, the optical transparence was improved above 90%.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.11
• /
• pp.15-17
• /
• 1996

In this paper, the therapy radiation dose measurement system has been implemented by using a microcomputer after radiation was irradiated on diodes from the MM22 microtron accelerator. We have displayed 7-channel diode output values on the LCD after processing those in the 80196 MCU(Micro Computer Unit). Signal processing has been performed in the pulse mode because we can process the signal fast and use it to perform portal image by increasing a number of diode channels in the future. In order to verify the microcomputer based radiation measurement system of diodes, diode output values were compared with that of semiconductor.

• IE interfaces
• /
• v.24 no.1
• /
• pp.71-77
• /
• 2011

Design works consist of essential works and subsidiary works. Essential design works means designing creative ideas and productive ideas, while subsidiary design works means helping essential works those are making data tables and specification sheets, checking CAD data's integrity. Subsidiary design works forms the bulk of the whole design process and affects the time limit of delivery. Therefore we propose the automatic data matching system for CAD data's integrity. Proposed system is automatic system supporting subsidiary design works. The data matching system consists of three parts; 1) automatic generation of data tables 2) supporting module for checking CAD data's integrity between Drawings 3) automatic generation of spec. sheets. Developed system was tested in LCD equipment manufacture company and was found to be useful system.

• Proceedings of the KAIS Fall Conference
• /
• 2004.06a
• /
• pp.221-223
• /
• 2004

본 논문에서는 RF 플라즈마를 사용하는 공정장비의 임피던스 정합 특성 개선을 위해 RF Match 제어단의 제어 알고리즘과 하드웨어의 디지털화 방안에 대한 연구를 수행하였다. 개발된 제어단은 최적의 동작성능을 위하여 멀티 프리셋, 이득제어 기능 등 부가기능을 갖도록 설계/제작하였고, 또한 LCD 모듈의 설치를 통하여 RF Match의 실시간 상태 파악이 가능하도록 하였다. 개발된 제어단에 대한 실험결과로부터 RF 전력의 over/under shoot, 플라즈마 플리커 등의 현상이 제거되었고, 정합시간이 크게 단축되었음을 알 수 있었다.

• Proceedings of the KIEE Conference
• /
• 2004.05a
• /
• pp.147-149
• /
• 2004

Although most of the people have studied English for a long time, their English conversation capability is low. When we provide them portable conversational-type English learners by the application of computer and information process technology, such portable learners can be used to enhance their English conversation capability by their conventional conversation exercises. The core technology to develop such learner is the development of a voice recognition and synthesis module under an embedded environment. This paper deals with voice recognition and synthesis, prototype of the learner module using a DSP(Digital Signal Processing) chip for voice processing, voice playback function, flash memory file system, PC download function using USB ports, English conversation text function by the use of SMC(Smart Media Card) flash memory, LCD display function, MP3 music listening function, etc. Application areas of the prototype equipped with such various functions are vast, i.e. portable language learners, amusement devices, kids toy, control by voice, security by the use of voice, etc.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.414-415
• /
• 2007

PMMA light guiding plate with nano pattern was fabricated by nano imprinting technology. Silicon mold was fabricated by conventional photolithography. A nickel stamper was fabricated by electroplating process using silicon mold. Nano imprinting was performed on PMMA plate at $140^{\circ}C$ under pressure of 20kN. The nano pattern on PMMA plate was investigated using FE-SEM.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.4
• /
• pp.62-68
• /
• 2019

The optoelectronic display units such as TFT-LCD or OLED require many thin optical plastic films and their mass manufacturing processes employ CO2 laser cutting of those thin films in a large quantity. However, laser film cutting could generate fume particles through melt shearing, vaporization, and chemical degradation and those particles could be of great concern for film surface contamination. In order to appreciate the fume particle dispersion behaviors in laser film cutting, this study relies on random particle simulations by probabilistic distributions of particle size, ejection velocity and angles coupled with Basset-Boussinesq-Oseen model of particle trajectory in low Reynolds number flows. Here, up to one million particles of random sampling have been tested to effectively show fume particles dispersed on the film surface. The computational results could show that particular range of fume particle size could easily disperse into the pixel region of processed optical films.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.4
• /
• pp.130-134
• /
• 2020

This paper proposes a new method for the digit recognition on a 7-segment display. The proposed method uses morphological processing that dilates segments of digits and connects them into strokes. The digits are extracted by connected component analysis and finally, template matching method recognizes the extracted digits. The proposed method is implemented using C language in Raspberry Pi 4 system with a camera module for a real-time image processing. Experiments were conducted by using various 7-segment LED displays and 7-segment mono LCD displays. The results show that the proposed method is successful for the digit recognition on the 7-segment displays.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.1
• /
• pp.46-49
• /
• 1986

A 32x32 liquid crystal (LC) flat panel display using two-dimensional array of PMOS switches and capacitors is designed and fabricated. Standard PMOS process was followed to fabricate the switch and capacitor array on silicon wafer, on the top of which guest-host effect liquid crystal was wmployed as an electro-optical material for optical switching and liquid crystal display(LCD) with its external drive circuitry was basically successful. Remaining problems to be solved are improvement of contrast ratio, good surface alignment and uniformity.