• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.208-208
• /
• 2009

We used Brewster's Law to examine the mechanism of liquid crystal (LC) alignment on an organic insulation layer when subjected to ion-beam irradiation. Brewster's Law implies that the maximum rate polarized ray on a slanted insulation layers on the substrate and it illustrates the dependence of polarization and themechanical structure on the ion beam irradiation process. The pretilt angle of nematic LCs on the organic insulation surface was about $1.13^{\circ}$ for an ion beam exposure of $45^{\circ}$ for 1 minute at 1800eV. This shows the dependence of LC alignment on the polarization ratio in a slanted organic insulation layer.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.126-131
• /
• 2004

The popularity of flat-panel display(FPD), including plasma display panel(PDP) and liquid-crystal display(LCD), has given rise to the need to streamline their production. In these days, PDP is one of the most popular display devices because of its expansion of manufacturing process and simplicity. Bus electrodes, sustain electrodes, barrier ribs and RGB phosphors are patterned on PDP panel to display an image. Since a minute damage on the pattern can cause a serious defect to display, it is important to inspect the pattern precisely. In this paper, an automatic inspection system of repeated pattern in PDP panel has been introduced to find the defect, such as open, short, dirt, island, and so on. And the inspection system has been operated in the mass production line of PDP.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1233-1235
• /
• 2004

We have designed High Performance Prism LGP in 17 inch TFT-LCD. In test result to embody high brightness BLU in case of LGP of base and upper surface with 17 inch, thickness 8mm adding prism construct, it is superior brightness improvement than previous that of printing form about some 20% and in this course to embody actual material it succeeded prism LGP production by 17 inch injection form process.

• 전자공학회논문지D
• /
• 제35D권8호
• /
• pp.76-81
• /
• 1998

This paper presents a new method to synthesize a digital hologram that meets the resolution of a currently manufactured LCD while capable of displaying a 3-D object. That is accomplished by segmenting a hologram, resulting in relaxed sampling constraint. We show that the segmentation of a hologram enables us to utilize the planewave approximation and, unlike in a holographic stereogram, it does not require projection process, but directly takes fourier transform of horizontally sliced 2-D images that constitute a 3-D object, which makes it possible to reconstruct a higher resolution image with depth information. We also show that proposed hologram contains data significantly smaller than the conventional hologram does, which is quite useful for constructing wide-viewing hologram. Finally, simulation results obtained by both methods are compared.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
• /
• pp.23-23
• /
• 2003

PCB 회로기판용 전해동박은 드럼형태의 음극 표면에 연속적으로 전기 도금한 후 벗겨내어 권취하는 원박 제조공정과 접착성, 내열성, 내화학성, 방청성을 부여하기 위한 후처리 공정으로 나눈다. 이 후처리 공정 중 동박과 수지와의 접착성을 부여하기 위해 일반적으로 전기도금을 통해 조화(Nodule)처리를 실시하는데, 최근 LCD, PDP 등의 평판 디스플레이 장치의 구동칩이 실장되는 TCP용 동박의 경우 2$\mu\textrm{m}$이하의 낮은 조도(Rz)와 함께 높은 접착강도(Peel Strength)가 요구되고 있다. 그러나, Reel to Reel 형태의 연속도금공정으로 진행되는 조화처리에 있어 일반 비이커 실험결과는 실제 양산공정과의 재현성에 있어서 상당한 제한성이 노출된 바 있다. 이에 본 연구에서는 Reel to Reel 형태의 연속도금공정을 모사 할 수 있는 실험장치를 설계, 제작하여 동박표면의 노듈형성에 있어 주요인자를 정량적으로 분석하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.608-613
• /
• 2007

Fine pitch microprobe arrays are microneedle-like probes for inspecting the pixel of LCD panel. They are usually made of multilayers of metallic, nonmetallic, or combination of the two. In this study, the microprobe arrays were fabricated using the process applied for MEMS fabrication technology and they consist of BeCu, BeNi, or Si. Their contacting probing force and deflection were measured using the laser equipment. The design requirement are 5gf of a minimum contact force and $150{\mu}m$ of a maximum deflection. A lot of microprobe shape are possible satisfying the requirement. A double cantilever-type microprobe having needles on both ends were applied for this study. Several candidate were chosen using the topology and shape optimization technique subjected to the design requirements. Finite element results and experimental results were compared and both gave good correlation.

• International Journal of Precision Engineering and Manufacturing
• /
• 제1권1호
• /
• pp.56-61
• /
• 2000

We present a fast inspection method of machine vision for in-line quality assurance of liquid crystal displays(LCD) and plasma display panels(PDP). The method incorporates an optical spatial filter in the Fourier plane of the imaging optics to block the normal periodic pattern, extracting only defects real time without relying on intensive software image process. Special emphasis is on designing a collimated white light source to provide high degree of spatial coherence for effective real time Fourier transform. At the same time, a low level of temporal coherence is attained to improve defect detection capabilities by avoiding undesirable coherent noises. Experimental results show that the proposed inspection method offers a detection accuracy of 15% tolerance, which is sufficient for industrial applications.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1269-1271
• /
• 2008

We find some array mura are caused by S/D bridge or channel open in 4 mask process. The gray tone PR thickness non-uniformity is the main reason of these defects. By the adjustment of exposure and dry etch parameters, S/D bridge and channel open ratio drops by 10.87%.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.695-698
• /
• 2006

The photosensitive poly-siloxane material used as the passivation layers for the conventional back channel etched (BCE) thin film transistors (TFTs) has been investigated. Through the organic material, the TFT array fabrication process can be reduced and higher aperture ratio can be achieved for higher LCD panel performance. The interface between the organic passivation layer and the back channel of the amorphous active region has been improved by the back channel oxygen treatment and the devices exhibits lower leakage current than the conventional silicon nitride passivation layer of BCE TFTs. The leakage currents between Indium-tin-oxide (ITO) pixels and the TFT devices and its mechanism have also been investigated in this paper.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1676-1681
• /
• 2006

We report on Organic Vapor Phase Deposition $(OVPD^{(R)})$ an innovative deposition technology for organic light emitting device (OLED) and organic semiconductor manufacturing. The combination of $OVPD^{(R)}$ with Close Coupled Showerhead (CCS) technology results in manufacturing equipment with vast potential for cost effective manufacturing of OLED displays commercially competitive to LCD. The actual $OVPD^{(R)}$ equipment concept and design is discussed: Computational Fluid Dynamic (CFD) modeling is compared with experimental results proving the excellent controllability of the deposition process. Further other production relevant deposition properties are being reviewed e.g. high deposition rates and high organic material utilization efficiency of the $OVPD^{(R)}$ - Technology. Data from devices made by $OVPD^{(R)}$ show comparable/ superior performance to those fabricated with conventional vacuum thermal evaporation (VTE) techniques. An outlook on further potentials of $OVPD^{(R)}$ with respect to enabling advanced organic device structures is given.