• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.698-700
• /
• 2003

LGP (Light-Guide Panel) of TFT-LCD Backligh/Frontlight is one of the major components which affect on the product quality of LCD. Since the brightness distribution of LGP is sensitive to the process error in manufacturing, the optical characteristics such as reflection and absorption of LGP pattern should be modeled including the process error. LGP is developed by using the fast and reliable design technology, which uses the concept of the inverse-design, makes the model on the characteristics of uncertainty in the manufacturing process, and designs the dispersion pattern analytically without try-and-error by using an artificial intelligence. The PEA(Process-Error-Adaptive) design gives the best solution in handling the process error. The offset of target in feedback system makes such the best pattern design possible that the brightness distribution is nearly same (more than 90%) with target in regardless of the miscellaneous errors in mass production. The present design method has been also applied to frontlight and multi-side-lamp(eg., four-side-four-lamp) backlight.

• 한국산학기술학회논문지
• /
• 제13권9호
• /
• pp.3815-3821
• /
• 2012

LCD 프레임은 중 대형 TFT-LCD BLU의 기본형상을 유지시켜주는 중요한 부분이다. 중 대형 LCD 프레임을 효율적으로 생산하기 위해 1 캐비티에서 2 캐비티 사출 공정으로의 개선이 필요하다. 2 캐비티 금형 구조는 콤팩트하게 되었고 핫 런너 존이 증가되었기 때문에 사출온도를 조절하기 어렵게 되었다. 본 연구에서는 2 캐비티 사출성형공정으로 생산된 프레임에 대한 품질을 평가하기 위해서 유한요소해석 프로그램을 사용하여 사출해석을 수행하였다. 1 캐비티와 2 캐비티 공정에서 계산된 사출압력과 최대 변형량은 각각 41.13 MPa과 1.62 mm, 40.49 MPa과 1.66 mm이다. 1 캐비티 프레임의 측정된 최대 굽힘 하중, 표면거칠기가 140 N, 0.13 ${\mu}m$, 인데 비하여 2 캐비티 중 좌, 우 프레임의 측정값들은 209 N, 0.08 ${\mu}m$와 193 N, 0.10 ${\mu}m$이다. 열화상은 2 캐비티 금형 중 좌 우 금형 온도의 최대 표준 편차값은 $1.23^{\circ}C$임을 나타내고 있다. 시뮬레이션과 측정은 전체적으로 2 캐비티 사출공정의 프레임 품질이 1 캐비티 품질보다 나쁘지 않다는 것을 보여주고 있다. 그러나 2 캐비티 공정에서 프레임의 최대 굽힘 하중값은 1 캐비티 공정의 하중값보다 매우 증가되었다.

• 한국정밀공학회지
• /
• 제25권12호
• /
• pp.27-32
• /
• 2008

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.975-977
• /
• 2004

According to thin and light form-factor and additional function of today's electronic devices, it is required to decrease the pattern pitch of FPC. The high density demand is more and more important trend especially, for small size LCD module. Based on this requirement, the manufacturing process is advancing from subtractive method to super subtractive method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.216-219
• /
• 2005

In recent, LCD becomes one of the main display devices and expected to have quite good market share during the next couple of years. The demand for low cost and high performance, however, is becoming severe as the competition among other display devices like PDP, OLED increases. To satisfy this demand from market, we need to optimize the parts or modules of the LCD, reduce the number of the assemble and enhance the process for the high brightness and uniformity of the LCD. The LCD consists mainly of LCD panel and Backlight unit(BLU). BLU, which takes big portion of the cost for LCD, consists of light source, light guide panel and many kinds of functional film. Recently light guide panel or film for BLU has micro patterns on its surface and consequently to reduce the number of parts and enhace the brightness and its uniformity. In this study, some methodologies for the fabrication of the master/stamper and molding the light quide panel are introduced for 50um pitch of prizm patterned substrate. Mechanical machining process is adapted and optimized to fabricate micro patterned stamper using the micro cutting tool. Injection molding technology is also developed to obtain uniformly replicated micro patterned products.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.95-98
• /
• 2006

LCD-BLU (Back Light Unit) is one of kernel parts of LCD unit. The fabrication method of a 3-D micro mold patterned with micro-lenses for the LGP (Light Guiding Plate), one of the most important parts of LCD-BLU, was presented. Instead of dot pattern made by etching, 3-D optical pattern design with $50{\mu}m$ micro-lens was applied in the present study. The micro-lens pattern fabricated by modified LiGA with thermal reflow process was applied to the optical design of LGP. The positive micro-lens patterned injection mold with different aspect ratios (i.e. 0.3 and 0.4) was fabricated with modified LiGA with thermal reflow process. The brightness of LCD-BLU increased as aspect ratio of micro-lens increased.

• 한국정밀공학회지
• /
• 제27권6호
• /
• pp.24-31
• /
• 2010

Laser carbonization of a polymer layer can be employed in various applications in the microelectronics industry, e.g repairing brightness pixels of an LCD panel. In this work, the process of thermal degradation of LCD color filter polymer by various laser sources with pulsewidths from CW to fs is studied. LCD pixels are irradiated by the lasers and the threshold irradiance of LCD color filter polymer carbonization is experimentally measured. In the numerical analysis, the transient temperature distribution is calculated and the number density of carbonization in the polymer layer is also estimated. It is shown that all the lasers can carbonize the polymer layers if the output power is adjusted to meet the thermal conditions for polymerization and that pulsed lasers can result in more uniform distribution of temperature and carbonization than the CW laser.

• 소성∙가공
• /
• 제11권4호
• /
• pp.332-340
• /
• 2002

The light guide plate of the TFT-LCD reflects the light originated from the light source, and guides the light to the front side of LCD so that we can see images vividly. This paper is concerned with tile injection molding of the light guide plate for the reflective typed LCD related to IMT-2000. The finite element analysis has been carried out based on the pine stress theory to predict both the thermal stresses of the products in the post-filling stage and the in-plane deformation behavior of the products after ejection process. Based on the simulation results, the mold for the light guide plate of a 2inch sized LCD has been designed.

• 한국정밀공학회지
• /
• 제24권10호
• /
• pp.99-108
• /
• 2007

As the structure of a mobile phone becomes thin to catch up with a slim product trend, the reliability of a LCD module is on the rise as a big issue for a product design. A drop test is the most basic and important verification method for a mechanical quality control but it requires much time and cost during a product development process. Thus many manufacturers have considered design guide lines using CAE and simulation for more effective usage of limited resources on the market. In this paper, the Maximum Principle Stress of a LCD glass panel is calculated on the basis of explicit FE Analyses method and input conditions are determined according to the general test standard. The design guideline for reliability improvements are suggested on the basis of the results of FE Analysis.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.914-917
• /
• 2002

We have obtained high performance and low voltage driving OCB panel by reducing the critical voltage and retardation matching between liquid crystal layer and compensation films. The critical voltage in the panel has been minimized by flattening color filter layer and optimizing a rubbing process. In addition, an appropriate retardation of the film and LC layer has scanned to achieve low driving voltage and high transmission. The proto-type 17" WXGA OCB panel has demonstrated with less than 5V drive and over 80 degree for all viewing direction except for rubbing direction with over 90% of TN light efficiency.