• 기술발표회
• /
• 통권2006호
• /
• pp.279-291
• /
• 2006

This study shows decision-making process for selection of cutoff wall on a wastewater treatment project. There are 10 different cut-off wall methods So, we examine the site to gather information for find appropriate methods. After using that information, 10 cutoff wall methods are reviewed for analysis. Through brainstorming, four alternatives are selected for design VE item. Following the standard VE process, we established performance criteria and evaluated function score(F) using questionnaire. The questionnaires, brainstorming and AHP method for weighting on performance criteria and evaluate function score increased the reliability of this selection process. Water Jet method, one of four methods, has the best function score(F=92.71) and the lease construction cost(as cost index 1,000). The value score also highest as 92.7, so we select the method. The result is value innovation type In addition, the authors try to calculate the environmental burden in selection process using LCA. We cannot conduct the full LCA as defined ISO, so perform Simple LCA In LCA result, the cut-off grouting has the least environmental burden as index 9.09E+01 and Water Jet method has following as the second. To selection best method to specific area and purpose, design VE/LCG process used as useful tool and it is needed to develop integrated method that evaluate VEILCC and LCA as one-set process.

• 한국태양에너지학회 논문집
• /
• 제23권4호
• /
• pp.89-96
• /
• 2003

In planning a building retrofit, energy conservation, thermal comfort and economic benefits should be considered. In this study, retrofit effects of exterior insulating method on preventing condensation, saving energy were analyzed through the heat transfer simulation, energy simulation in the apartment house retrofitted by exterior insulating method cheaper than other retrofit methods. The results of this study show that the retrofit using exterior insulating method can prevent the condensation at the corner walls and save about 20% of annual heating load. The LCC analysis revealed to be effective to select a dryvit system for a building retrofit.

• 대한토목학회논문집
• /
• 제33권5호
• /
• pp.2081-2091
• /
• 2013

최근, 엔지니어링의 실무에서 토목 시설물의 설계 및 유지관리 단계를 위한 효과적인 생애주기비용(Life Cycle Cost; LCC) 산정 방법의 실무적인 적용에 대한 요구가 높아지고 있다. 이와 같이, 21세기에 들어 엔지니어링의 최적 의사결정의 실무적 문제에 가치공학과 더불어 생애주기비용 분석은 새로운 패러다임으로 주목받고 있지만 이러한 연구 개발의 괄목할만한 진보에도 불구하고, 대부분의 설계단계 생애주기비용 분석은 확정적, 확률적 분석기법에 그치고 있고 적용 가능한 구조물도 일반 교량에 국한되어 있다. 따라서 본 논문은 설계단계 생애주기비용 분석에 대한 실용적이고 합리적인 신뢰성해석 기반 성능저하 모델을 고려하여 기존의 분석방법을 업데이트하는 분석 방법론을 개발하고 이를 특수교인 사장교에 적용하는데 목적이 있다. 이에 현재가치의 합으로 표현되는 직/간접 유지관리비용을 기존 방법과는 다르게 기대 성능저하모델에 바탕을 둔 최적 유지관리 시나리오를 통한 생애주기비용 분석 기법으로 제시하였다. 마지막으로 본 논문에서 제안한 업데이트된 생애주기비용 분석의 방법론을 실제 고속도로 사장교 건설 프로젝트의 설계단계 의사결정 문제에 적용하여 합리적이고 체계적인 분석 방법 및 최적의사결정과정을 제시하였다.

• 한국건설관리학회논문집
• /
• 제19권2호
• /
• pp.38-49
• /
• 2018

파리협약 비준 이후 온실감축에 대한 중요성 및 국가 의무가 커짐에 따라 정부에서는 건축산업의 온실가스 감축을 위한 정책을 지속적으로 강화해 나가고 있으며, 특히 노후건축물에 대한 에너지 성능개선의 필요성을 강조하고 있다. 2014년 이후 정부에서는 공공 노후건축물 그린리모델링 사업의 시공비 지원 등으로 시범사업을 운영 중에 있으며 이를 통해 그린리모델링의 모범사례를 개발하여 민간에 그린리모델링을 활성 시키고자 한다. 본 연구에서는 공공 노후건축물의 그린리모델링을 통한 수준별 경제성을 분석하였으며, 해당건물의 대안을 계획하기 위해 건물 육안조사 및 장비측정을 수행하였다. 개선안은 대안을 종합한 그린리모델링 계획안으로 수준별 5개의 개선안을 개발하여 각 안에 대한 경제성을 분석하였다. 분석방법은 ECO2를 통한 1차 에너지소요량 산정 및 LCC 분석을 진행하였으며, LCC 측면에서는 개선 3, 4안(중간수준 안)이 가장 우수한 것으로 분석되었으며, 다음으로 최대비용안, 최소 비용 안 순으로 결과가 도출되었다. 이 결과로 향후 진행될 그린리모델링 성능계획 및 경제성 분석 시 기초자료로서 활용이 가능 할 것으로 예상된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1001-1006
• /
• 2004

Selection of optimal railway line is taken into consideration include of the purpose of railway, geographical features and facility of management. This study performed opinions of specialists, checking of industrial environment, analysis of bid guideline to select the optimal line and executed AHP method to make quality model and choose weight factors. Therefore, this study executed about six categories which are the efficiency of transportation, facility of planning and construction, economical efficiency, coincidency of planning, the civil appeal and environmental standards, connection with system, and indicated the differences of other method by analyze into specific factors of each categories.

• 산업기술연구
• /
• 제28권B호
• /
• pp.117-122
• /
• 2008

This paper presents the conductance model at high frequency of the Ceramic Metal Halide Lamp and the designing method of the electronic ballast with the LCC resonant tank type by using that model. Conductance model is based on a physical phenomenon in the discharge tube of the lamp and model constants of conductance model are obtained by Least Squares Method. After equivalent impedances are determined by the conductance model, The LCC resonance tank is designed by using the equation of the lamp power. Simulation result using PSpice software and experimental results show that the conductance model in this paper is very useful to design the electronic ballast at high frequency for the Ceramic Metal Halide Lamps.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.56-57
• /
• 2014

As school facilities have been expanding quantity better than quality, efficient school facility management has been focused on from 2001 in domestic. Due to obsolescence of school facility, objective management and maintenance cost of school facility is very important. However LCC(Life cycle cost) analyst, owner, engineer, contractor and facility manager have a difficulty to obtain and facilitate the basic analyzed data required to analyze LCC of school facility and establish maintenance plan. Therefore this research presents muti-dimensional analysis method through data warehouse technique for supplying maintenance cost information of school facility that can trace and accumulate the scattered LCCing data in the perspective of life cycle of school facility.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.272-273
• /
• 2017

As businesses put a greater emphasis on outward appearances, the demand for external window cleaning has been on the rise. However, with the conventional labor-intensive window cleaning method, it is hard to meet this demand. Therefore, this study proposes a Life Cycle Cost (LCC) analysis model for a guiderail-type cleaning robot, and estimate the LCCs of the conventional method and the cleaning robot. The findings of this research are expected to serve as a guide for future development of a cleaning robot.

• 전기학회논문지P
• /
• 제66권3호
• /
• pp.123-128
• /
• 2017

Electric utilities has been considered the necessity to introduce AM(asset management) of electric power facilities in order to reduce maintenance cost of existing facilities and to maximize profit. In order to make decisions in terms of repairs and replacements for power transformers, not only measuring by counting parts and labor costs, but comprehensive comparison including reliability and cost is needed. Therefore, this study is modeling input cost for power transformer during its entire life and also the life cycle cost (LCC) technique is applied. In particular, this paper presents an application of heuristic harmony search(HS) optimization algorithm to the convergence and the validity of economic life assessment of power transformer from LCC technique. This recently developed HS algorithm is conceptualized using the musical process of searching for a perfect state of harmony. It uses a stochastic random search instead of a gradient search so that derivative information is unnecessary. The effectiveness of the proposed identification method has been demonstrated through an economic life assessment simulation of power transformer using HS optimization algorithm.

• 한국건축시공학회지
• /
• 제12권4호
• /
• pp.386-392
• /
• 2012

In this study, life cycle cost (LCC) is analyzed according to insulation panel system type using a deterministic LCC analysis method. Through this analysis, it was found that the construction cost in the deterministic LCC analysis for Ceramic panels was low compared to the construction cost for metal and stone panels. Also, the difference in cost between the Ceramic panel and the metal panel was about 2 times. In the area of maintenance cost, it was found to be similar to the previously analyzed construction cost, in which the metal panel has the highest cost due to the high cost of construction and the frequent need for maintenance. In the case of the stone panel, a small difference in cost is shown compared with that of the Ceramic panel, but the cost is higher than the Ceramic panel. Regarding the cost of waste disposal, the Ceramic panel can reduce the cost by at least 1.5 times and up to 2 times compared to other panel systems. Finally, in the analysis of sensitivity according to changes in discount rates, the Ceramic panel and metal panel systems have a similar cost, and the cost of the metal panel is a bit larger than that of other panel systems. Thus, in the subjects used in the analysis, the Ceramic panel system shows the highest economic benefits.