• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권11호
• /
• pp.4122-4144
• /
• 2021

In this fast-paced technological world, the Internet of Things is a ground breaking technology which finds an immense role in the present electronic world which includes different embedded sensors, devices and most other things which are connected to the Internet. The IoT devices are designed in a way that it helps to collect various forms of data from varied sources and transmit them in digitalized form. In modern era of IoT technology data security is a trending issue which greatly affects the confidentiality of important information. Keeping the issue in mind a novel light encryption strategy known as LCB is designed for IoT devices for optimal security. LCB exploits the benefits of Feistel structure and the architectural benefits of substitution permutation network both to give more security. Moreover, this newly designed technique is tested on (Virtex-7) XC7VX330T FPGA board and it takes much little area of 224 GE (Gate Equivalent) and is extremely fast with very less combinational path delay of 0.877 ns. An in-depth screening confirms the proposed work to promise more security to counter cryptographic attacks. Lastly the Avalanche Effect (AE) of LCB showed as 63.125% and 63.875% when key and plaintext (PT) are taken into consideration respectively.

• Journal of Crop Science and Biotechnology
• /
• 제11권1호
• /
• pp.23-30
• /
• 2008

The relationship between three phenological parameters and somatic embryogenesis was investigated during a two-year period. Staminodes and petals from six hybrids and two clones as controls were sowed on three distinct primary callus growth media. Flowering level, fructification level, and leaf thrusts rhythm as phenological parameters were measured simultaneously during the weekly harvest of flower buds. Mean and coefficient of variation of the measured parameters highlighted stable phenological phases. The relationship between phenological parameters and somatic embryogenesis was investigated first by comparing the variation of somatic embryogenesis and that of the phenological parameters, and second by using Pearson's linear correlation. Except for the fructification level in both control clones the first year, the other parameters recorded stable phenological phases, regardless of the genotype and year. Favorable and unfavorable phases for the somatic embryogenesis were identified. In hybrids, favorable phases included February, August, September, and October. In both control clones, time interval propitious to embryogenesis stretched from February to December. The significance of the coefficient of correlation seemed to establish a relationship between somatic embryogenesis and phenology. However, a causal link could not be established. Leaf thrusts rhythm was revealed to be the phenological parameter most linked to somatic embryogenesis. Attempts to optimize embryogenesis during unfavorable phases, showed that a correction of 2.4 D/TDZ concentration is not the solution.

• 마이크로전자및패키징학회지
• /
• 제14권1호
• /
• pp.11-17
• /
• 2007

수은의 방전을 이용하는 CCFL, EEFL, FFL은 그 특성상 상온에서의 구동 특성과 저온에서의 구동 특성이 매우 다르며, 그 결과 수은 증기압이 충분하지 않은 저온에서 구동 시 완전 점등하지 못하고 램프별로 또는 방전 채널별로 불 균일 점등이 발생할 수 있다. 이러한 저온 시동의 어려움을 해결하기 위해, 본 논문에서는 Level Control Block (LCB) 를 포함하는 인버터를 이용하여 저온 $-20^{\circ}C$에서 최대 130 Watt로 제한된 입력전력을 이용하여 외부 전극형 면광원 램프를 이용한 LCD 백라이트가 안정되게 동작될 수 있음을 확인하였다.

• 한국해양공학회지
• /
• 제13권2호통권32호
• /
• pp.168-175
• /
• 1999

In the present paper, a hull form for the turtle boat type incinerating vessel was developed based on the Finite source Distribution Method(FDM) and 1-$C_p$ method. In order to obtain proper hull form within the limited time and budget, a computer program OCL(Optimization of $C_p$ and LCB) was developed adn used. For the confirmation of the theoretical results by OCL, these theoretical results were compared with results of model test in the circulating water channel (CWC)in Chosun University.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.856-867
• /
• 2020

This paper aims to provide the most useful method of determining an optimum LCB position and design direction of fore- and aft-body hull shape for a SLBV. It is known that the SLBV has a lower length-to-beam ratio, larger Cb and simpler stern shape designed for the installation of azimuth thrusters comparing to those of conventional LNG carriers. Due to these specific particulars of SLBV, the optimum LCB position was very different to that of conventional LNG carrier. And various approaches were applied to determine the optimum fore- and aft-body hull shape. The design direction for the optimum hull-form was evaluated as the minimization of the total resistance which includes the wave-making resistance and form-drag with numerical simulation.

• 대한조선학회지
• /
• 제4권1호
• /
• pp.49-54
• /
• 1967

The authors considered the effects of trim in the small coastal passenger boat upon resistance in this paper. Any change of trim no matter how small, necessarily produces some effect upon resistance. The relations between the resistance coefficients and trim were investigated through the towing test of the Model $MCI-P_1-65$, Korean Standardized Ship, GT 70 tons passenger boat in the gravitational tank. The Lines of the Model are given in Fig. 1. Principal dimensions and other characteristics vary with the trim in general. Those values varied with the trim for $MCI-P_1-65$ are tabulated in table 1. The resistance was measured at five conditions such as even keel, 0.0273L, (original designed trim) 0.0473L, 0.0663L, 0.0873L trim by the stern, fixing the displacement corresponding to the designed load water line. Model was made of wood in length of 3.5 feet coated with varnish, and without appendages. As the artificial turbulent stimulator, the sand strip method was used. The results of model towing tests, correcting to water temperature of $70^{\circ}F$, were expanded to full scale using the Schoenherr's friction formula and surface roughness allowance coefficient of 0.0004. The authors point out, the following results. 1) Optimum trim which gives the minimum resistance exists for every speed at constant displacement and each comes to the same value. For $MCI-P_1-65$ optimum trim is 0.0673L trim by the stern(Fig.4-The cross curves of the resistancecoefficients). 2) At constant displacement, when LCB(longitudinal position of center of buoyancy) varies with the trim, there exists optimum value of LCB which gives minimum resistance for every speed and each comes to the same value. For $MCI-P_1-65$ optimum position of LCB is 8%L aft from midship section (Fig.6).

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1998년도 춘계학술발표회 논문집
• /
• pp.163-185
• /
• 1998

The purpose of this study was to analyze the physiology changes by circuit weight training(CWT). The subject of this study consists of 16 student on ship(experimental groups(SE) N=8, control group(SCa) N=8) and 16 students on land (experimental groups(LE) n=8, control groups(LCb) N=8). The items of measurement were the changes of CWT time and heart rate per week, musclear functino and cardiopulmonary function. The conclusions are as follows : 1. Muscular fuction 1) Back strength in SE and LE group was increased significantly (p<.01, p<.05, 8.86% and 7.08%).Grip strength was increased slightly in 4 groups but there was no significance. 2) In push-ups, all 4 groups were increased significantly (p<.05, p<.01), sit-ups also were increased significantly in SE and LE group (p<.05, 6.71% and 9.62%). 3) In SE and LE group , standing long jump was in significantly (p<.01, p<.05, 4.49% and 6.09%), but only in LE group , side step was increased significantly (p<0.1, 5.84%). 2. Cardiopulmonary function 1) HRrest was decreased slightly in all 4 groups but was not significant changes. HRmax was increased only in LE group significantly (p<.05, 2.81%), treadmill running time was increased significantly in SE and LE group respectively (p<.01, p<.05, 10.78% and 11.07%). 2) VEmax was increased significantly in SE and LE group(p<.05, p<.01, 10.59% and 13.68%), but only in LE group Rfmax was increased significantly (p<.01, 4.83%). 3) In VO2max, LCb group was increased significantly (p<.05, 6.835), but SCa group was decreased significantly (p<.05, 4.32). VO2max/kg$.$min was increased significantly in LE and LCb group respectively (p<.01 p<.05. 4.75% and 3.98%).

• The Plant Pathology Journal
• /
• 제32권1호
• /
• pp.47-52
• /
• 2016

Cotton leaf curl is devastating disease of cotton characterized by leaf curling, vein darkening and enations. The disease symptoms are induced by DNA satellite known as Cotton leaf curl Multan betasatellite (CLCuMuB), dominant betasatellite in cotton but another betasatellite known as Chili leaf curl betasatellite (ChLCB) is also found associated with the disease. Grafting experiment was performed to determine if host plant resistance is determinant of dominant population of betasatellite in cotton (several distinct strains of CLCuMuB are associated with the disease). Infected scion of Gossypium hirsutum collected from field (the source) was grafted on G. arboreum, a diploid cotton species, resistant to the disease. A healthy scion of G. hirsutum (sink) was grafted at the top of G. arboreum to determine the movement of virus/betasatellite to upper susceptible scion of G. hirsutum. Symptoms of disease appeared in the upper scion and presence of virus/betasatellite in the upper scion was confirmed via molecular techniques, showing that virus/betasatellite was able to move to upper scion through resistant G. arboreum. However, no symptoms appeared on G. arboreum. Betasatelites were cloned and sequenced from lower scion, upper scion and G. arboreum which show that the lower scion contained both CLCuMuB and ChLCB, however only ChLCB was found in G. arboreum. The upper scion contained CLCuMuB with a deletion of 78 nucleotides (nt) in the non-coding region between Arich sequence and ${\beta}C1$ gene and insertion of 27 nt in the middle of ${\beta}C1$ ORF. This study may help in investigating molecular basis of resistance in G. arboreum.

• 미생물학회지
• /
• 제51권4호
• /
• pp.419-426
• /
• 2015

가축산업분야에서 항생제의 사용이 금지됨에 따라, 질병 예방을 통한 축산농가의 생산성 향상을 위해 사료첨가제인 미생물제재의 개발과 같은 예방적 수단이 필요하게 되었다. 본 연구는 가축의 생산성을 높이기 위해 사료 분해 능력이 좋고 항균활성이 뛰어난 포자 형성 Bacillus 균주 3종인 B. sutilis LCB7, B. licheniformis SHS14, B. amyloliquefaciens LCB10을 우수 균주로 선발하였다. 최종적으로 선발한 Bacillus 3종을 1:1:1 비율로 혼합하여 혼합 종균을 제조하여 항균시험(in vitro) 결과, 단일 3종 및 lincomycin과 비교하여 유사한 활성을 보여주었으며, 송아지를 이용하여 항균활성 시험(in vivo)을 실시한 결과에서도 lincomycin 투여 대비 90% 수준의 높은 활성을 보여주었다. 개발한 혼합 종균의 안정적 보존을 위해 혼합 종균을 제조하여 다시 증균을 통하여 미생물군집 분석을 통하여 확인한 결과, 초기 군집비율과 증균 후 군집비율이 매우 유사하게 유지되었다. 이로서 본 연구에서는 선발된 Bacillus 균주 3종을 이용하여 제조한 혼합 종균이 사료첨가제용 미생물제재로서 이용 가능함을 최종 확인하였다.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2008년도 특별논문집
• /
• pp.106-111
• /
• 2008

A hull form is 181K DWT Bulk Carrier, of which new design and hull form have been developed using CFD tools and model tests. The basic concept design of hull form has been carried out with considering the factors, which are a lot of influence of the wave and viscosity resistance. The considered factors of particular are LCB, DLWL shape, tern and stem profile, Cp-curve shape, etc. Numerical calculations are carried out in the initial design stage and experimental model tests are also carried out in towing tank of MOERI. The variation of the significantly effective characteristics is carried out to achieve optimized hull form. The results from numerical calculations and model test as well as the design procedures to obtain an optimized hull form resent in this paper.