• Animal Bioscience
• /
• v.35 no.5
• /
• pp.677-689
• /
• 2022

Objective: This study was conducted to evaluate the effects of concentrate level and chromium-methionine (Cr-Met) supplementation on the growth performance, carcass characteristics, meat quality, and fatty acid composition of Tan lambs. Methods: Sixty male Tan lambs (21±1.23 kg body weight) fed a finishing diet (concentrate-to-forage ratio: 35:65 [LC group] or 55:45 [HC group]) with daily Cr-Met supplementation (0, 0.75, or 1.50 g) were used in a completely randomized design with a 2×3 factorial arrangement of treatments. Results: Lambs from the HC group had higher average daily gain, dry matter (DM) digestibility, dressing percentages, leg proportions, intramuscular fat (IMF) contents, and saturated fatty acid levels, but lower feed conversion ratios, globulin (GLB) and total protein (TP) concentrations, shear force, and monounsaturated fatty acid (MUFA) levels (all p<0.05). Cr-Met supplementation increased the DM digestibility, GLB and TP concentrations, rack and loin percentages, and cooking loss, but decreased the IMF contents and leg proportions (all p<0.05). Cr-Met supplementation at 0.75 g/d increased the conjugated linoleic acid (CLA) content in both the HC and LC groups (p<0.01). Significant interactions between the concentrate level and Cr-Met dosage were observed for MUFA (p<0.01) and polyunsaturated fatty acid (PUFA) (p<0.01) levels. Meat from the lambs fed an unsupplemented LC diet presented the highest PUFA and MUFA levels (p<0.01). However, the MUFA and PUFA levels decreased significantly with increasing Cr-Met supplementation levels in the LC group (p<0.01), whereas the opposite trend was seen in the HC group. Conclusion: The HC diet improved the growth performance of Tan lambs, increased their profitability by increasing leg and rack joint proportions, and improved meat quality by promoting an IMF content that was more visibly acceptable to consumers. Cr-Met supplementation at 0.75 g/d in a HC diet was the best choice and may be economically beneficial.

• Annals of Hepato-Biliary-Pancreatic Surgery
• /
• v.27 no.1
• /
• pp.20-27
• /
• 2023

There are many variations and unclear definitions of the appropriate timing of laparoscopic cholecystectomy (LC) after endoscopic retrograde cholangiopancreatography (ERCP), and there is still a lack of consistency about the appropriate timing. Inappropriate timing can be associated with serious comorbidity and can affect the patients. This meta-analysis was conducted to assess the operative outcomes and morbidity to provide a benefit to the patients based on the best timing of LC after ERCP. Randomized controlled trials (RCTs) and retrospective studies were identified from the PubMed and Scopus databases from inception to July 2021. A meta-analysis was performed to estimate the treatment effects on operative outcomes and morbidity. Four RCTs and four retrospective studies met our inclusion criteria. A meta-analysis indicated that patients who received LC after ERCP on the same day or within 72 hours had about 0.354 days shorter length of hospital stay with a shorter operative time of about 0.111-1.835 minutes and a lower risk of complications around 37%-73%. Our evidence suggests that the appropriate timing of LC after ERCP is either the same day or within 72 hours for treating cholelithiasis patients based on the severity of disease.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.246.1-246.1
• /
• 2003

Bioequivalence of two enalapril maleate tablets, formulation A and B, was evaluated according to the Korean Guidelines for Bioequivalence Test (KGBT 2001). Twenty healthy male volunteers (19∼27 years old) were randomly divided into two groups and a randomized 2x2 cross-over study was performed. Following oral administration of enalapril maleate tablets (20 mg dose), blood sample was taken at pre-determined time intervals and the concentrations of enalapril in plasma were determined using LC-MS. (omitted)

• Toxicological Research
• /
• v.29 no.3
• /
• pp.203-209
• /
• 2013

A simple and rapid liquid chromatography-tandem mass spectrometry (LC-MS/MS) method was developed and validated for the quantification of ${\varepsilon}$-acetamidocaproic acid (AACA), the primary metabolite of zinc acexamate (ZAC), in rat plasma by using normetanephrine as an internal standard. Sample preparation involved protein precipitation using methanol. Separation was achieved on a Gemini-NX $C_{18}$ column ($150mm{\times}2.0mm$, i.d., 3 ${\mu}m$ particle size) using a mixture of 0.1% formic acid-water : acetonitrile (80 : 20, v/v) as the mobile phase at a flow rate of 200 ${\mu}l/min$. Quantification was performed on a triple quadrupole mass spectrometer employing electrospray ionization and operating in multiple reaction monitoring (MRM) and positive ion mode. The total chromatographic run time was 4.0 min, and the calibration curves of AACA were linear over the concentration range of 20~5000 ng/ml in rat plasma. The coefficient of variation and relative error at four QC levels were ranged from 1.0% to 5.8% and from -8.4% to 6.6%, respectively. The present method was successfully applied for estimating the pharmacokinetic parameters of AACA following intravenous or oral administration of ZAC to rats.

• The Korean Journal of Pesticide Science
• /
• v.20 no.4
• /
• pp.293-299
• /
• 2016

Effect of nematicidal compounds on hatchability of sugar beet cyst nematode, Heterodera schachtii and its infective juveniles was investigated. The sugar beet cyst nematode was isolated from Chinese cabbage field in Samcheok in Korea. Acute toxicity of nematicidal compounds against infective juveniles was also tested to find the $LC_{50}$ by exposing juveniles to given dilutions of each compound. Hatchability and mortality of infective juveniles of H. schachtii were influenced by nematicidal compounds (Fluopyram 40% SC, imicyafos 30% SC, fosthiazate 30% SC, abamectine 1.68% SC, terthiophene, and Eclipta prostrata extract). Fluopyram and imicyafos yielded the lowest rates of hatching. Total hatched infective juveniles were significantly different among nematicidal compounds. Positive correlation in percentage reduction of hatching was observed in fluopyram. Furthermore, the highest mortality was also observed in the treatments of fluopyram and imicyafos ($LC_{50}$ of 0.0543 and 0.0178 ppm respectively). The study, therefore, demonstrated available alternative nematicidal compounds which could be used in the control of H. schachtii.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.10
• /
• pp.873-877
• /
• 2007

In order to apply a complex multilayer chip LC filter, this study has estimated the interfacial reaction and coupling properties of dielectric materials $Pb(Fe_{1/2}Nb_{1/2})O_3$ and Ni-Zn-Cu ferrite materials through low-temperature co-sintering (LTCS). PFN powders were fabricated using double calcinated at $700^{\circ}C$ and then $850^{\circ}C$. While the perovskite phase rate was found to be 91 %, after heat treatment at $900^{\circ}C$ for 6h, the perovskite phase rate and density exhibited a value of 100 % and 7.46$g/cm^3$, respectively. The PFN/Ni-Zn-Cu ferrite, PFN/CUO (or $Pb_2Fe_2O_5$) and ferrite/CuO (or $Pb_2Fe_2O_5$) were mechanically coupled through interfacial reactions after the specimen was co-sintered at $900^{\circ}C$ for 6 h. No intermediate layer exists for the mutual coupling reaction. This result indicates the possibility of low-temperature co-sintering without any interfacial reaction layer for a multilayer chip LC filter.

• Journal of the Optical Society of Korea
• /
• v.20 no.6
• /
• pp.799-806
• /
• 2016

We present a polarization-dependent prism array film for controlling the viewing angle distribution of liquid crystal (LC) display panels without loss of light efficiency. On a directional backlight unit, our polarization-dependent prism array film, made into a stacked bilayer with a well-aligned liquid crystalline reactive mesogen (RM) layer on the UV-imprinted prism structure, can continuously control the light refraction function of the prism array by electrically switching incident polarization states of a polarization-controlling layer prepared by a twisted nematic LC mode. The viewing angle control properties of the polarization-dependent prism array film are analyzed under different prism angle and refractive index conditions of the RM layer. A simple analytic model is also presented to describe the intermediate viewing angle distributions with continuously varying applied voltages and incident polarization states.

• Progress in Superconductivity and Cryogenics
• /
• v.20 no.4
• /
• pp.55-59
• /
• 2018

Currently, the development of industry makes needs larger electric supply. Providers must consider the efficiency about losses and reliability of the system. In this case, DC power system can save electrical energy; long-distance transmission line losses. Relevance to switch technology with a voltage-source converter (VSC) in AC-DC conversion system have been researched. But, protection device of DC-link against fault current is still needed to study much. VSC DC power system is vulnerable to DC-cable short-circuit and ground faults, because DC-link has a huge size of capacitor filter which releases extremely large current during DC faults. Furthermore, DC has a fatal flaw that current zero crossing is nonexistence. To interrupt the DC, several methods which make a zero crossing is used; parallel connecting self-excited series LC circuit with main switch, LC circuit with power electronic device called hybrid DC circuit breaker. Meanwhile, self-excited oscillator needs a huge size capacitor that produces big oscillation current which makes zero crossing. This capacitor has a quite effective on the price of DCCB. In this paper, hybrid self-excited type superconducting DCCB which are using AC circuit breaker system is studied by simulation tool PSCAD/EMTDC.

• Food Science and Biotechnology
• /
• v.17 no.1
• /
• pp.80-84
• /
• 2008

The effect of gellan (GE), xanthan (XA), and $\lambda$-carrageenan (LC) on the viscosity, sedimentation, ellagic acid content, and turbidity of grape 'Campbell Early' juice (CEJ) was investigated. CEJ samples with 0.15% each of GE, XA, and LC were tested for the above variables after 0, 5, 10, and 20 days of storage. The samples containing GE (0.15%) showed the least amount of sediment formation, the lowest ellagic acid content and turbidity, and a rise in viscosity. Sedimentation in CEJ decreased with increased viscosity due to the addition of gums which also limited the ellagic acid content and turbidity. GE was the most effective additive for the stabilization of CEJ.

• Structural Engineering and Mechanics
• /
• v.62 no.5
• /
• pp.651-661
• /
• 2017

This paper presents an experimental study of bond-slip behavior of reinforced lightweight aggregate concrete (LC) and normal weight concrete (NC) with embedded steel bar. Tests were conducted on tension-pull specimens that had cross-sectional dimension with a reinforcing bar embedded in the center section. The experimental variables include concrete strength (20, 40, and 60 MPa) and coarse aggregate type (normal-weight aggregate and reservoir sludge lightweight aggregate). The test results show that as concrete compressive strength increased, the magnitudes of the slip of the LC specimens were greater than those of the NC specimens. Moreover, the bond strength and stiffness approaches zero at the loaded end, or close to the central anchored point of the specimen. In addition, the proposed bond stress-slip equation can effectively estimate the behavior of bond stress and steel bar slipping.