• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.324-327
• /
• 2005

We propose a novel technique for evaluating the azimuthal anchoring strength of the alignment film on the nematic liquid crystal (LC). In our evaluation, a unique cell, which has two domain in one cell, was used; one is hybrid aligned nematic (HAN) region, the other is twsited nematic (TN) region (viz. HAN/TN two domain cell). From the comparison of director angles on the front substrate with each region, we are able to determine the angle between easy axis and real director axis on the front substrate. From this evaluation, the azimuthal anchoring strength was obtained accurately.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.04a
• /
• pp.43-44
• /
• 2006

We have studied effect of Patterned Vertical Alignment (PVA) mode on electro-optical characteristics and stability of liquid crystal director upon electrode pattering. In the present studies, LC director field and stability of conventional PVA mode electrode patterns were analyzed and new type of electrode patterns were suggested. At last, comparison between this new type of electrode patterns to conventional electrode pattern types were followed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.162-162
• /
• 2009

Optical bounce which occurs by over twist of the liquid crystal (LC) director has a problem of response time in fringe-field switching (FFS) modes. After removing the electric field, effective birefringence ($d{\Delta}n_{eff}$) at the edge of pixel electrode meets the $\lambda/2$ phase instantly, since tilt angle of LC directors at that position suddenly decreases compared to twist angle. In this paper, based on the careful analysis, origin of optical bounce has been explained.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04a
• /
• pp.49-50
• /
• 2008

OCB mode has advantages such as fast response time and wide viewing angle. But it has inevitable shortcoming which initial splay state must be changed to bend state. To overcoming this problem, OCB cell filled LC with RM monomer was cured by UV when voltage applied. Through previously mentioned methods, even if electric field is none, bend state was made by stabilized LC director. In this paper, we investigated the electric characteristics of polymer stabilized OCB mode.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.512-515
• /
• 2003

We have studied a novel vertical alignment liquid crystal cell. At initial state of a cell with rubbed parallel on top and bottom substrates, the vertically aligned LCs are twisted by $180^{\circ}$. However, after a critical voltage is applied to the cell, the configuration of the LC changes to optically compensated splay form, where the mid-director lies parallel to the substrate and thus the LC has two hybrid alignments around center.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05a
• /
• pp.157-160
• /
• 2004

We have studied an optically compensated splay (OCS) mode driven by fringe electric field. The OCS LC configuration obtained by applying voltage to vertically aligned LCs shows a dark state when an optic axis of the OCS cell coincides with one of crossed polarizer axis. When the fringe electric field is applied, the LC director rotates in plane above whole electrode surface, giving rise to high transmittance and wide viewing angle simultaneously.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.567-570
• /
• 2004

We have designed a single gap transflective liquid crystal display (LCD) driven by a fringe electric field, in which the LCs are homogeneously aligned in the initial state. In the reflective and transmissive areas, the degrees of the rotation of the LC director are $22.5^{\circ}$ and $45^{\circ}$, respectively. Utilizing this mechanism and an in-cell retarder with a quarter-wave plate that is used below the LC layer, the transflective LCD using fringe-field switching (FFS) mode is realized.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1054-1057
• /
• 2003

We have studied $90^{\circ}$ twisted nematic (TN) mode driven by fringe electric field, where two polarizers are parallel each other such that the cell shows a black state before a voltage is applied. According to the studies by computer simulation for a LC with negative dielectric anisotropy, the LC twists perpendicular to the horizontal field direction of fringe electric field and the degree of tilt angle is very low, when a voltage is applied. Therefore, the new device exhibits wide viewing angle characteristic due to in-plane switching and high transmittance since the LC director aligns parallel to the polarizer axis.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.2
• /
• pp.185-188
• /
• 2006

We studied on the reverse twist near the pixel edge depending on the rubbing direction for the fringe field switching (FFS) mode. Liquid crystal (LC) dynamic and the transmittance near the pixel edge, where the various field directions are generated, depend on the initial rubbing direction because the position of reverse twist is decided by the angle between the electric direction and the LC director at a bias voltage. For example, when the rubbing angle is $7^{\circ}$, the reverse twist appears on the bottom position of the right sharp comer of the pixel edge so that the reverse region exists far away from main active region. But, when the rubbing angle is $-7^{\circ}$, the reverse twist appears on the top position of the right sharp comer of the pixel edge, resulting that the region becomes more close to the main active area and the unstable disclination lines (DLs) easily intrude into the active region. Therefore, it is necessary to keep the reverse twist region far from the active region and it is possible by controlling the rubbing direction in the design of a pixel electrode.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.7
• /
• pp.647-651
• /
• 2005

We studied the external pressure-stable advanced frnge field switching (FFS) pixel design with 3 slit sructue. In this mode, a patterned pixel slit is partitioned into 3 areas, namely, two edges and a center, where the edge slit angle is larger than the center slit angle. Thus the reverse twist region in the pixel edge is reduced comparing to the conventional FFS mode so that the LC dynamics in this region becomes very stable. And also, when the external pressure is applied to the panel at the high voltage, the disclination lines (DLs) were barely intruded into active area. Therefore, the structure is use for the pen based system such as the tablet personal computer (PC), personal digital asistant (PDA).