• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.12
• /
• pp.1144-1148
• /
• 2006

We have investigated liquid crystal (LC) aligning capabilities and electro-optical (EO) characteristics of transparent electrodes as Al-doped ZnO (AZO) substituting indium tin oxide (ITO). The experiment results show that a uniform vertical LC alignment on AZO electrodes based on a rubbed polyimide (PI) surface were achieved. A high pretilt angle of about $88^{\circ}$ was obtained. EO performances of the VA cell on rubbed PI surfaces with AZO electrodes are almost the same as that of the VA cell with ITO electrodes. These results appeared that AZO electrodes as transparent electrodes of LCDs could substitute ITO electrodes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1580-1583
• /
• 2008

We propose an optical configuration for a vertical alignment (VA) liquid crystal (LC) cell to eliminate the off-axis light leakage in the dark state. The proposed compensation configuration consists of a positive A-film, a positive C-film and a negative C-film. The optical design is performed on a Poincar$\acute{e}$ sphere. This configuration has a better tolerance to the wavelength dispersion, as the polarization trace could self-compensate it. From calculations, we show that the proposed VA LC cell can improve the viewing angle characteristics by compensating for the light leakage in the diagonal direction.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.893-896
• /
• 2007

A series of new photosensitive polyimides having long alkoxy cinnamate chains were synthesized for liquid crystal (LC) photoalignment material. The polymer after irradiating linearly polarized UV light induced homogeneous and stable LC alignment. The chemical structure of the polymeric material was characterized and their photochemical LC alignment behavior was evaluated.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.1
• /
• pp.30-35
• /
• 2006

We have studied the motion of charged micro-particles that are immersed in a nematic liquid crystal (LC) and controlled by in-plane field. The LC is an anisotropic liquid such that the viscosity of the LC depends on flow direction, phase of the LC, and temperature, which affects the motion of the charged particles under the influence of electric field. This study shows that the motion of charged particles mainly depends on the applied voltage and the LC phase, but does not show any significant influence from the initial alignment of LC, although one may expect directional difference in drag force due to interaction between LC and particle. The viscosity changes due to temperature variations in nematic phase also show no signification influence on particle velocity when compared to the effect from varying in-plane field strength.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.300-300
• /
• 2008

In this study, the advanced DuoPIGatron-type ion beam (IB) system was applied to inorganic thin film for aligning liquid crystal (LC). LC alignment on $Ta_2O_5$ via IB irradiation was embodied. As a result of IB irradiation, the homogeneously aligned liquid crystal display (LCD) on $Ta_2O_5$ was observed with low pretilt angles. The $Ta_2O_5$ were deposited on indium-tin-oxide coated Coming 1737 glass substrates by rf magnetron sputtering at $200^{\circ}C$. The deposition process resulted in forming very uniform thin film on glass substrates without any defects. To confirm the application of the inorganic alignment on modem display optical devices, we fabricated twisted nematic LCD and measured optical property and response time. As a result of the experiment, the electro optical characteristics of the LCD fabricated by using IB irradiation on $Ta_2O_5$ alignment layer were similar with the other LCD fabricated by using rubbing process.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.792-795
• /
• 2006

In-plane-switching (IPS)-mode LCD is one of the most useful technologies for a broad range of viewing angles. To apply for IPS-LCDs, we synthesized novel homogeneous alignment materials, changing dianhydrides (BTDA and BPDA) and bridged diamines (ODA and PACM). We measured their pre-tilt angles using the crystal rotation method with positive LC and their surface properties.

• Journal of Information Display
• /
• v.10 no.4
• /
• pp.175-179
• /
• 2009

As the physical properties of nematic liquid crystals vary with respect to temperature, the performances of liquid crystal displays (LCDs) are highly dependent on temperature. Additionally, it is well known that the electro-optic characteristics of LCDs, such as transmittance and threshold voltage, also rely on the LCD switching modes. The temperature dependence of the electro-optic characteristics of the wide-viewing-angle LCD modes, such as in-plane switching (IPS), multidomain vertical alignment by patterned electrode (PVA), and fringe-field switching (FFS), have been studied, and the results showed that the FFS mode has lower temperature dependence compared to the IPS and PVA modes. Since the liquid crystal (LC) reorients in different ways in each mode, this result is associated with the temperature dependence of LC's bend and twist elastic constants, and also with the position of the main reorientation, either in the middle or on the surface of the LC layer.

• Journal of Satellite, Information and Communications
• /
• v.9 no.1
• /
• pp.33-37
• /
• 2014

This paper introduces homogeneous liquid crystal (LC) orientations on chemically modulated polystyrene (PS) surfaces using various ion beam (IB) exposure time. Transparent PS was replaced with conventional polyimide material. As a non-contact process, IB bombardment process induced LC orientation in the direction parallel to the IB process. Through x-ray photoelectron spectroscopy, it was shown that the chemical compositional changes of the IB-irradiated PS surfaces were determined as a function of IB exposure time.Using this analysis, the optimal IB bombardment condition was determined at IB exposure time of up to 15 s. Moreover, thermal stability on IB-irradiated PS surfaces were carried out which showed that a relatively high IB exposure time induced a thermally stable LC alignment property.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.271-274
• /
• 1998

In this paper, the monodomain alignment of nematic liquid crystal(NLC) in the cell fabricated by one side transcription alignment method on PI surface with side chain were investigated. The LC alignment produced by the transcription alignment method is attributable to a memory effect of the NLC on Pl surfaces. We observed that the pretilt angle of NLC is generated about 3.6$^{\circ}$ in a cell with one side transcription alignment on PI surface. Also, the electro-optical(EO) performance of TN-LCD with one side transcription alignment method on PI surface will be discussed.

• Journal of Information Display
• /
• v.11 no.4
• /
• pp.144-148
• /
• 2010

In this paper, vertically aligned (VA) liquid crystal (LC) modes were investigated using the alkyl chain ordering effect of self-assembled monolayers (SAMs) prepared on the anisotropic inorganic surface. On the anisotropic surface prepared through oblique ion beam irradiations, the SAM molecules are adsorbed, producing macroscopic alkyl chain ordering, which can determine the pretilt direction of the vertically aligned LC molecules through the intermolecular interactions on the surface.