• Clean Technology
• /
• v.11 no.1
• /
• pp.41-50
• /
• 2005

In this study, semibatch emulsion copolymerization of n-BA as adhesive component and MMA as coagulant component were carried out for the stable acrylic polymer latex in aqueous phase for polymer cement using LE-type nonionic surfactant as environmental friendly surfactant. The stable polymer emulsion was obtained with the increases of chain length(n) of this surfactant. The effect on the amount of LE-50 as nonionic surfactant were showed that the concentration of polymer latex were increased by increasing the amount of LE-50, whereas the average particle size were decreased by increasing the amount. The addition of functional monomer in initial reactor charge showed a significant effect on the final polymer concentration and the latex particle size. The single polymerization of each n-BA or MMA showed a very low concentration of polymer latex and very big particle size due to coagulation. In the polymerization composed of mixed monomer with MMA and n-BA, the larger the ratio of MMA to n-BA in the copolymers, the greater the amount of coagulum produced. It was found that a stable copolymers were obtained in the range of 15-35 % of n-BA. Moreover, incorporation of some functional monomers in addition to of main monomers became more stable polymer latex. Through DSC and IR analysis, the final polymer latex was composed by MMA/n-BA/AA/AM with a single Tg depending on the reaction conditions. As a result, the conditions of this acrylic polymerization could also be effectively controlled to get the desired final products.

• Elastomers and Composites
• /
• v.37 no.1
• /
• pp.21-30
• /
• 2002

Core-shell polymers of methyl methacrylate/styrene pair were prepared by sequential emulsion polymerization in the presence of sodium dodecyl benzene sulfonate(SDBS) as an emulsifier using ammonium persulfate(APS) as an initiator. The characteristics of these core-shell polymers were evaluated. Core-shell composite latex has the both properties of core and shell components in a particle, where as polymer blonds or copolymers show a combined properties from the physical properties or two homopolymers. This unique behavior of core-shell composite latex can be used in many industrial fields. However, in preparation of core-shell composite latex, several unexpected phenomina are observed, such as, particle coagulation, low degree of polymerization, and formation of new particles during shell polymerization. To solve the disadvantages, we studied the effects of surfactant concentrations, initiator concentrations, and reaction temperature on the tore-shell structure or PMMA/PSt and PSt/PMMA. Particle size and particle size distribution were measured by using particle size analyzer, and the morphology of the core-shell composite latex was observed by using transmission electron microscope. Glass transition temperature($T_g$) was also measured by using differential scanning calorimeter. To identify the core-shell structure, pH of the composite latex solutions were measured.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.10a
• /
• pp.148-153
• /
• 2003

고분자 물질은 유기용제를 사용하여 제조되는 경우가 일반적이다. 이들 중에서 용제형 아크릴계 고분자는 점착강도, 내습성, 내수성 그리고 내열성 등이 우수하여 페인트, 접ㆍ점착제, 섬유 등의 산업전반에 이용되고 있으나 용제사용에 따른 화재의 위험성과 환경적인 문제점 때문에 규제의 대상이 되고 있다. 이러한 위험성과 환경문제점은 유화중합법에 의해 고분자물질을 제조함으로써 해결되며, 그 중에서 단계 유화중합법은 다른 중합법에 비해 온도조절이 용이하며, 반응속도와 분자량을 조절할 수 있다는 장점 때문에 latex 공업이나 고분자 blending 기술면에서 많이 이용되고 있는 실정이다.(중략)

• Korean Journal of Veterinary Service
• /
• v.17 no.1
• /
• pp.32-36
• /
• 1994

This study was carried out to investigate antibodies against Toxoplasma gondii by Latex agglutination test from 101 slaugutered pigs and 109 cattle. In the species, 5(4.6%) out of 109 cattle and 4(4.0%) out of 101 pigs were seropositive for Toxoplasma gondii.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1991.10a
• /
• pp.99-106
• /
• 1991

Result of an experimental study on the manufacture, the mechanical properties and waterightness of pitch-based carbon fiber reinforced fly ash.cement composites are presented in this paper. The carbon fiber reinforced fly ash.cement composites using early strength cement, silica powder and a small amount of stylene butadiene rubber latex are prepared with carbon fiber, foaming agents and mixing conditions. As a result, the mechanical and plysical properties such as compresive, tensile and flectural strengths, watertightness and cement composites are improved by using a small amount of stylene butadiene rubber latex.

• Elastomers and Composites
• /
• v.32 no.4
• /
• pp.276-283
• /
• 1997

• The Korean Journal of Rheology
• /
• v.4 no.2
• /
• pp.89-98
• /
• 1992

• The tire
• /
• s.21
• /
• pp.26-29
• /
• 1969

• Elastomers and Composites
• /
• v.19 no.3
• /
• pp.178-193
• /
• 1984

• Elastomers and Composites
• /
• v.5 no.1
• /
• pp.25-36
• /
• 1970