• ETRI Journal
• /
• 제42권2호
• /
• pp.258-271
• /
• 2020

A correlation exists between luminance samples and chrominance samples of a color image. It is beneficial to exploit such interchannel redundancy for color image compression. We propose an algorithm that predicts chrominance components Cb and Cr from the luminance component Y. The prediction model is trained by supervised learning with Laplacian-regularized least squares to minimize the total prediction error. Kernel principal component analysis mapping, which reduces computational complexity, is implemented on the same point set at both the encoder and decoder to ensure that predictions are identical at both the ends without signaling extra location information. In addition, chrominance subsampling and entropy coding for model parameters are adopted to further reduce the bit rate. Finally, luminance information and model parameters are stored for image reconstruction. Experimental results show the performance superiority of the proposed algorithm over its predecessor and JPEG, and even over JPEG-XR. The compensation version with the chrominance difference of the proposed algorithm performs close to and even better than JPEG2000 in some cases.

• Steel and Composite Structures
• /
• 제20권6호
• /
• pp.1259-1274
• /
• 2016

A precast composite column system has been developed in this study by utilizing multi interlocking spiral steel into a centrifugally-formed hollow-core precast (CHPC) column. The proposed hybrid column system can have enhanced performances in the composite interaction behavior between the hollowed precast column and cast-in-place (CIP) core-filled concrete, the lap splice performance of bundled bars, and the confining effect of concrete. In the experimental program, reversed cyclic loading tests were conducted on a conventional reinforced concrete (RC) column fabricated monolithically, two CHPC columns filled with CIP concrete, and two steel-reinforced concrete (SRC) columns. It was confirmed that the interlocking spirals was very effective to enhance the structural performance of the CHPC column, and all the hollow-core precast column specimens tested in this study showed good seismic performances comparable to the monolithic control specimen.

• 한국생산제조학회지
• /
• 제20권3호
• /
• pp.280-283
• /
• 2011

This study investigates the durability of car body and the safety of passenger inside car body in the case of the impact contact at passenger and car body. In case of front impact contact, maximum von Mises equivalent stress and principal stress become 3240.7MPa and 1634MPa respectively at the rear part of car body and the neck of dummy. And maximum total deformation occurred with 14.145mm at the hand of dummy. In case of side impact contact, maximum von Mises equivalent stress and principal stress become 7687.9MPa and 1690.7MPa respectively at the front part of car body and the lap of dummy. And maximum total deformation occurred with 16.414 mm at the foot of dummy. In case of rear impact contact, maximum von Mises equivalent stress and principal stress become 2366.6MPa and 1447MPa respectively at the front part of car body and the neck of dummy. And maximum total deformation occurred with 7.548mm at the rear part of car body. As the maximum von-Mises stress at side impact is shown with more than 700MPa as over two times at front or rear impact the danger of car body is increased. The great possibility of damage is shown at neck and hand of dummy with more than total displacement of 10mm.

• 대한전자공학회논문지
• /
• 제20권4호
• /
• pp.10-15
• /
• 1983

본 논문에서는 전송 속도가 9600 bps인 data modem의 복조기와 equalizer의 효과적인 구성에 대하여 연구하였으며, finite word length 효과가 equalizer 동작에 미치는 영향을 제시하였다. 복조기에는 tap수가 37개인 decimation filter를 사용해서 symbol당 곱셈 횟수를 크게 줄였는데 이때 equalizer 동작에 있어 충분한 결과를 얻을 수 있음을 알 수 있었다. 주파수 offset이 존재할 때 1차 반송파 위상 추적 loop와 2차 반공파 위상 추적 loop의 성능을 비교하였고, word length를 각각 8 bit, 12 bit 및 16bit로 변화시켰을 경우 equalizer 평형상태 MSE(mean square error)의 변화 및 tap 적응을 위한 최적 step see와 lap수를 제시하였다.

• Journal of Periodontal and Implant Science
• /
• 제35권3호
• /
• pp.799-811
• /
• 2005

This study was carried out to examine the potency of the three surface compo- nents from Porphyromonas gingivalis to stimulate the murine macrophage cell line RAW264.7 to synthesize the pro-inflammatory cytokine tumor necrosis factor alpha($TNF-{\alpha}$) and nitric oxide (NO). Lipopolysaccharide(LPS). lipid A-associated proteins(LAP) and saline-extractable surface -associated material(SAM) were isolated from P. gingivalis 381. $TNF-{\alpha}$ release into culture supernatants was determined by two-site ELISA. NO production was assayed by measuring the accumulation of nitrite in culture supernatants. Western blot analysis of iNOS and analysis of reverse transcription(RT)-PCR products were carried out. The surface components extracted from this bacterium were almost equally potent in stimulating release of $TNF-{\alpha}$ and NO by RAW264.7 cells. $TNF-{\alpha}$ that was being measured immunologically was due to activation of $TNF-{\alpha}$ gene transcription. The present study clearly shows that P. gingivalis surface components fully induced iNOS expression in RAW264.7 cells in the absence of other stimuli. The ability of P. gingivalis surface components to promote the production of $TNF-{\alpha}$ and NO may be important in the pathogenesis of inflammatory periodontal disease.

• Structural Engineering and Mechanics
• /
• 제23권5호
• /
• pp.469-486
• /
• 2006

The main objective of this study was to investigate the seismic behavior of damaged reinforced concrete frames rehabilitated by introducing cast in place reinforced concrete infills. Four bare and five infilled frames were constructed and tested. Each specimen consisted of two (twin) 1/3-scale, one-bay and two-story reinforced concrete frames. Test specimens were tested under reversed-cyclic lateral loading until considerable damage occurred. RC infills were then introduced to the damaged specimens. One bare specimen was infilled without being subjected to any damage. All infilled frames were then tested under reversed-cyclic lateral loading until failure. While some of the test frames were detailed properly according to the current Turkish seismic code, others were built with the common deficiencies observed in existing residential buildings. The variables investigated were the effects of the damage level and deficiencies in the bare frame on the seismic behavior of the infilled frame. The deficiencies in the frame were; low concrete strength, inadequate confinement at member ends, 90 degree hooks in column and beam ties and inadequate length of lapped splices in column longitudinal bars made above the floor levels. Test results revealed that both the lateral strength and lateral stiffness increased significantly with the introduction of reinforced concrete infills even when the frame had the deficiencies mentioned above. The deficiency which affected the behavior of infilled frames most adversely was the presence of lap splices in column longitudinal reinforcement.

• 한국전자통신학회논문지
• /
• 제8권7호
• /
• pp.979-986
• /
• 2013

최근, 전기, 전자, 로봇, 의료 산업 등 전 분야에서 소형화된 크기로 고도의 지적인 기능을 가지는 MEMS 기반의 스마트 디바이스 개발에 큰 관심이 집중되고 있다. MEMS 기술은 스마트 디바이스에서 요구되는 복잡한 전기적, 기계적, 화학적 그리고 생물학적 기능들을 하나로 결합하여, 초소형, 초경량으로 설계하고, 동시에 이들 디바이스들을 대량으로 일괄 제조할 수 있기 때문에 생산성 및 실용성, 경제성 측면에서 매우 효과적이다. 따라서 본 연구에서는 다가올 MEMS 기반의 새로운 기술적 패러다임에 대비하기 위해 MEMS의 공정들을 분석하고 그 적용 사례들을 고찰함으로서 기본적인 적용 방법론을 확립한다.

• Earthquakes and Structures
• /
• 제5권3호
• /
• pp.297-319
• /
• 2013

Two destructive earthquakes occurred on October 23 and November 9, 2011 in Van province of Turkey. The damage in residential units shows significant deviation from the expectation of decreasing damage with increasing distance to epicenter. The most damaged settlement Ercis has the same distance to the epicenter with Muradiye, where no damage occurred while relatively less damage observed in Van having half distance. These three cities seem to have resembling soil conditions. If the damages are evaluated: joint failures and insufficient lap splice lengths are observed to be the main causes of the total collapses in RC buildings. Additionally, low concrete strength, reinforcement detailing mistakes, soft story, heavy overhang, pounding and short columns are among other damage reasons. Examples of damages due to non-structural elements are also given. Remarkable points about seismic damages are: collapsed buildings with shear-walls, heavily damaged buildings despite adequate concrete strength due to detailing mistakes, undamaged two-story adobe buildings close to totally collapsed RC ones and undamaged structural system in buildings with heavily damaged non-structural elements. On the contrary of the common belief that buildings with shear-walls are immune to total collapse among civil engineers, collapse of Gedikbulak primary school is a noteworthy example.

• 정보저장시스템학회논문집
• /
• 제3권4호
• /
• pp.196-201
• /
• 2007

As the demand for the lap-top computer has been increased, most users ask quiet environment to work comfortably. Therefore, noise problems of an ODD are of great interest. For the high speed ODD, the flow induced noise is caused by the turbulent flow[1], which is known to be a major source of overall noise of a slim type ODD. In this study, we introduce a new attempt to reduce the noise level using the concept of Helmholtz resonator[2].The experimental analysis is carried out for several cases at different resonance frequencies and different hole patterns. The results show reductions in the noise level from the acoustic noise absorption point of view.

• 정보처리학회논문지A
• /
• 제8A권4호
• /
• pp.339-344
• /
• 2001

인터넷의 급속한 확산과 통신 기술의 발전이 발전함에 따라 각종 가전 제품 및 통신 장비가 개발되고 서비스의 범위와 기능도 다양해 지고 있다. 이에 따라 내장형 시스템은 시스템 고유의 기능을 지원할 수 잇는 내장형 운영체제를 필요로 한다. 본 논문에서는 리눅스의 강력한 네트워킹 기능을 이용한 리눅스 라우터의 제작 사례를 바탕으로 내장형 리눅스 시스템을 개발하고, 내장형 리눅스를 커널로 사용함에 있어 발생되는 문제점의 해결방안을 기술하고자 한다. 개발된 내장형 리눅스 라우터와 영업용 라우터와의 성능 평가결과 대등한 성능을 제공하고 있다.