• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.8
• /
• pp.824-833
• /
• 2006

In this paper, the image modelling of road's lane markings is established using view frustum(VF) model. From this model, a measurement system of lane markings and obstacles is proposed. The system also involve the real time processing of the 3D position coordinate and the distance data from the camera to the points on the 3D world coordinate by virtue of the camera calibration. In order to reduce their measurement error, an useful algorithm for which analyze the geometric variations due to traveling vehicle's fluctuation using VF model is proposed. In experiments, without correction, for instance, the $0.4^{\circ}$ of pitching rotation gives the error of $0.4{\sim}0.6m$ at the distance of 10m, but the more far distance cause exponentially the more error. We con finned that this algorithm can be reduced less than 0.1m of error at the same condition.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.3
• /
• pp.42-51
• /
• 2009

Korean government is managing a system that appoints various type of cars into lanes based on the number of lanes. The institution has been abolished and enacted time and again. This paper analyzes ten sections of express way to clarify the efficiencies of the system. The result shows that violation rate and the number of accident have a positive correlation. This paper suggests regulation of violating cars and controlment by perceiving car registration number for efficient operation of the institution.

• Journal of IKEEE
• /
• v.20 no.1
• /
• pp.82-88
• /
• 2016

The detection rate of Progressive Probability Hough Transform(PPHT) is decreased when a lot of noise components exist due to an unclear or complex original image although it is quite a good algorithm that detects line segments accurately. In order to solve the problem, we propose an improved line detecting algorithm which is robust to noise components and recovers slightly damaged edges. The proposed algorithm is based on PPHT and traces a line segments by pixel and checks of it is straight. It increases the detection rate by reducing the effect of noise components and by recovering edge patterns within a limited pixel size. The proposed algorithm is applied to a lane detection method and the false positive detection rate is decreased by 30% and the line detection rate is increased by 15%.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.2
• /
• pp.183-190
• /
• 2002

This study is about the extraction of highway's superelevation using real time kinematic surveying among of GPS surveying methods which is economic method to construct data base in the side of highway maintain management. Using the developed vehicle, center line and shoulder of highway are measured and enough precision is obtained after analyzing the result. The result is show that 1.3 cm to 2.0 cm error in the clothed and about 0.8 cm to 1.2 cm error in the circular curve. Those errors are proved error to lane making during construction. This study is expected to become efficient method for extraction of highway alignment elements in the Mobile Mapping System.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.3
• /
• pp.233-241
• /
• 2014

This paper contributes to development of a new method for detecting rear-side vehicles and estimating the positions for blind spot region or providing the lane change information by using vision systems. Because the real image acquired during car driving has a lot of information including the target vehicle and background image as well as the noises such as lighting and shading, it is hard to extract only the target vehicle against the background image with satisfied robustness. In this paper, the target vehicle has been detected by repetitive image processing such as sobel and morphological operations and a Kalman filter has been also designed to cancel the background image and prevent the misreading of the target image. The proposed method can get faster image processing and more robustness rather than the previous researches. Various experiments were performed on the highway driving situations to evaluate the performance of the proposed algorithm.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.55.1-55.1
• /
• 2011

We investigate dynamical evolution of gas in barred galaxies using a high-resolution, grid-based hydrodynamic simulations on two-dimensional cylindrical geometry. Non-axisymmetric gravitational potential of the bar is represented by the Ferrers ellipsoids independent of time. Previous studies on this subject used either particle approaches or treated the bar potential in an incorrect way. The gaseous medium is assumed to be infinitesimally-thin, isothermal, unmagnetized, and initially uniform. To study the effects of various environments on the gas evolution, we vary the gas sound speed as well as the mass of a SMBH located at the center of a galaxy. An introduction of the bar potential produces bar substructure including a pair of dust lane shocks, a nuclear ring, and nuclear spirals. The sound speed affects the position and strength of the bar substructure significantly. As the sound speed increases, the dust lane shocks tend to move closer to the bar major axis, resulting in a smaller-size nuclear ring at the galactocentric radius of about 1 kpc. Nuclear spirals that develop inside a nuclear ring can persist only when either sound speed is low or in the presence of a SMBH; they would otherwise be destroyed by the ring material with eccentric orbits. The mass inflow rates of gas toward the galactic center is also found to be proportional to the sound speed. We find that the sound speed should be 15 km/s or larger if the mass inflow rate is to explain nuclear activities in Seyfert galaxies.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.185-190
• /
• 2006

The correct estimation of the ionospheric delays is very important for the precise kinematic positioning especially in case of the long baseline. In case of triple frequency system, the ionospheric delays can be estimated from the measurements, but, in case of dual frequency system, the situation is not so simple. The precision of those supplied by the external information source such as IONEX is not sufficient. The high frequency component is neglected, and the precision of the low frequency component is not sufficient for the long baseline positioning. On the other hand, the high frequency component can be estimated from the phase range measurements. If the low frequency components are estimated by using the external information source or pseudo range measurements, a more reasonable estimation of the ionospheric delays may be possible. It has already been discussed by the author that the estimation of the low frequency components by using the external information source is not sufficient but fairly effective. The estimation using the pseudo range measurements is discussed in the present paper. The accuracy is not sufficient at present because of the errors in the pseudo range measurements. It is clarified that the bias errors in the pseudo range measurements are responsible for the poor accuracy of the ionospheric delays. However, if the accuracy of the pseudo range measurements is improved in future, the method would become very promising.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.6 no.2 s.21
• /
• pp.9-15
• /
• 2006

Structures of Civil Engineering have been designed with a safety as their main purpose. However recently, the greenness side of the technology of civil engineering regarded as most Important and also utility values and stability of the structures. Also developments in the technology make materials to be higher strength and they shortened scales and stiffness of the structural members. This means that it brings an immoderate deflection and vibration of bridge structures simultaneously. Accordingly, this study ai ed to find and estimate the most idealized structure models on the effects of the deflection and vibration of bridges from the traffic lane load and human vibration - the main pass of bridge structures.

• Journal of Korean Society of Transportation
• /
• v.15 no.1
• /
• pp.129-156
• /
• 1997

8차로 고속도로에서 중앙분리대와 길 어깨에 의해 측방 여유폭이 제공되는 외측차 로(1.4차로)와 측방 여유폭이 제공되지 않는 내측차로 (2.3차로)에서 나타나는 운전자의 횡 방향 주행특성을 4개 지점에서 비디오 촬영하여 분석한 결과는 다음과 같다. (1) 차량의 횡 방향 주행궤적은 차로의 중심으로부터 주행방향의 좌측으로 이격된 주행 행태를 보이고 있 으며 이는 운전석의 위치에 의한 영향으로 판단된다. (2) 차량의 병행 주행시 외측 차로의 중심 이격 거리는 평균 0.38m이고 내측차로의 중심 이격 거리는 평균 0.34m로 나타났으며 T-test 겨로가 내측 차로와 외측 차로의 주행 이격 거리는 신뢰도 95%에서 상이한 것으로 나타났다. (3) 외측 차로의 주행궤적간 이격 거리는 평균 3.90m이고 내측 차로의 주행궤적 간 이격 거리는 평균 3.54m로서 내측 차로의 주행궤적간 이격 거리는 외측 차로의 주행궤 적간 이격 거리보다 0.36m 작다. 특히 내측 차로의 주행궤적간 이격 거리는 내측 차로간 차로 중심간 간격인 3.6m 보다 0.1m 작은 것으로 나타났다. (4) 내측차로 확장 대안으로 기존 도로폭 유지안 (3.5m, 3.7m, 3.5m)과 기존 도로폭 확장안 (3.6m, 3.7m, 3.7m, 3.6m)을 고려할 수 있으며 두 대안의 비교·분석결과 경제적 영향을 고려할 때 기존 도로폭 유지안이 우수한 것으로 분석되었다.

• Journal of Korean Society of Transportation
• /
• v.19 no.6
• /
• pp.7-17
• /
• 2001

The purpose of this paper is to develop automatic incident detection algorithm using image based detector in freeway management system. This algorithm was developed by using neutral network for high speed roadway and by using speed and occupancy variable for low speed roadway. The image detector system with the developed automatic incident detection algorithm can detect multi-lane as well as several detect areas for each lane. To evaluate this system, field tests to measure the detecting rate of incidents were performed with other systems which have APID and DES algorithm at high speed roadway(freeway) and low speed roadway(national arterial). As the results of field test, it found that the detect rate of this system was highest rate comparing to other two systems.