• 대한교통학회지
• /
• 제12권1호
• /
• pp.137-149
• /
• 1994

The objective of study is to evaluate the effect of speed control hump on traffic operation and accidents. Three sites were investigated for the change of traffic accidents before and after the hump installation. Vehicle speeds approaching the hump were also analyzed. The study revealed that not only the number of traffic accidents but also the accident severity were significantly reduced by the installation of hump. Further, different types of traffic accidents with lower severity were observed after the hump installation. For the effect of speed reduction by hump, it was found that the speeds observed at 15m upstream of hump were in the range of 36~50 percent of approaching speeds which were not affected by (ie, without) the hump. Economic analysis of hump installation showed the benefit-cost ratio of 4.3 and 11.2 at two sites. Further analysis revealed that the benefit by the accident reduction exceeds the cost by speed reduction and installation capital if AADT is below 43,150 vehicles on two lane highways. It is recommended from the study that humps should be considered on two lane highways of high accident locations for excessive speeds to reduce traffic accidents and severity.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권1호
• /
• pp.96-100
• /
• 2015

Adaptive background gain calibration loop for multi-lane serial links is proposed. In order to detect and cancel gain mismatches between lanes, a single digital loop using a ${\sum}{\Delta}$ ADC is employed, which provides a real-time adaptation of gain variations and is shared among all lanes to reduce power and area. Evaluation result showed that gain mismatches between lanes were well calibrated and tracked, resulting in timing budget at $10^{-6}$ BER increased from 0.261 UI to 0.363 UI with stable loop convergence.

• 한국자동차공학회논문집
• /
• 제10권3호
• /
• pp.245-253
• /
• 2002

A driver model with nervous neuromuscular system was developed to steer a vehicle along the prescribed path during handling simulations. A 3-dimensional vehicle model with 10 DOF and 3 DOF steering handle are used to perform a computer simulation. PID and fuzzy controller are used to perform single and double lane change, and their tracking abilities were compared. The effects of time delay and preview distance are also investigated, and it is demonstrated that the driver model developed can be an aid far objective evaluation of vehicle handling simulation.

• 한국자동차공학회논문집
• /
• 제5권5호
• /
• pp.1-8
• /
• 1997

The purpose of this study is to suggest the methods to model driver input and evaluate the handling performances of a vehicle by dynamic simulation using ADAMS (Automated Dynamic Analysis of Mechanical Systems) software. The driver input was modeled using the PID controller to follow the desired velocities and paths. The gains of the controller were decided by the trial and error methods aided by Ziegler-Nichols rule. It was successful to apply the rule for the vehicle model to follow the desired values of steady state cornering and lane change maneuver. As the results, handling performances of baseline and two variegated vehicles were evaluated. The theoretical provement was performed to explain the differences.

• 한국자동차공학회논문집
• /
• 제3권3호
• /
• pp.119-128
• /
• 1995

A driver-vehicle model means the integrated dynamic model that is able to estimate the steering wheel angle from the driver's desired path based on the dynamic characteristics of the driver and vehicle. In this paper, the dynamic characteristics of several four-wheel steering systems with the simultaneously steerable front and rear wheels are investigated and compared by means of the driver-vehicle model. Especially, the presented analysis results are obtained by using the ISO test codes such as lane change, double lane change and slalom, and the effects of the driver's steering response time and vehicle speed are examined on the responsiveness and stability of vehicle.

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 1999년도 제36회 학술발표회논문집
• /
• pp.229-234
• /
• 1999

본 논문은 한국도로용량편람의 신호교차로 용량분석에서 차로이용계수를 적용하는 방법을 신호교차로 용량분석의 절차와 이동류 구분 측면에서 살펴보았다. 고찰한 결과 차로이용계수의 개선방향은 다음과 같다. 첫째, v/c 비에 따라 차로이용계수를 적용함으로써, 반복계산이 불필요하게 발생한다. 따라서 편람 개정시 이러한 반복계산을 없애는 값을 산정해야 한다. 둘째, 차로이용계수는 직진 전용차로를 통과하는 직진교통량에 대해서만 적용해야 한다. 실제 현장에서 교통량 조사 상황을 고려해보면, 상당히 불합리한 값을 도출한 것이다. 따라서 차로이용계수를 적용하는 이동류를 정확히 설명하고 그 문제점을 분명히 해야 한다. 셋째, 차로이용계수는 직진 이동류에 대해서만 있다. 우리 나라 전역에 있는 소규모 교차로를 고려해 볼 때, 차로이용계수는 다양한 차로군(lane group)에 대하여 추가적으로 조사연구가 필요하다.

• 한국환경과학회지
• /
• 제14권12호
• /
• pp.1081-1085
• /
• 2005

This study is carried out for obtaining the basic materials for presentation of creation and desirable management of urban roadside trees through analyse the existence effect of trees on people who operate th commercial areas along the streets. Roadside tree and green areas are recognized comfort space in addition to simple planting area. Therefore various trees and flowering plants should be introduced in addition to roadside facilities for convenience. Planted roadside trees should be maintained. We will propose an method that residents plant and manage the trees and flowering plants on the two lane of one way road. However main lines more than four lane of one way have more public property beside the residents space. Therefore these should be maintained mainly by related government agencies.

• 한국멀티미디어학회논문지
• /
• 제21권10호
• /
• pp.1171-1181
• /
• 2018

Most simulated shooting systems are TDM based method and dot type laser has been used. The proposed laser pattern based simulated shooting system is a new approach. It can distinguish shooters by calculating the angle of bar shaped laser pattern by each shooter. Unlike the existing TDM method, it is possible to distinguish shooters and lanes by patterns so that there is no time division restriction like TDM method. It is also possible to recognize overlapped impact points of laser patterns launched by multiple shooters. After the laser pattern based simulated shooting system was implemented, general shot and overlapped shot were tested for each lane. Through experiments, we confirmed the possibility of continuous shooting. In addition, it is possible to separate the pattern by each lane, and 100% recognition result was obtained even if impact points overlapped.

• 한국안전학회지
• /
• 제30권2호
• /
• pp.70-76
• /
• 2015

This study deals with the traffic accident of circular intersections. The purpose of the study is to develop the accident models by traffic violation type. In pursuing the above, this study gives particular attention to analyzing various factors that influence traffic accident and developing such the optimal models as Poisson and Negative binomial regression models. The main results are the followings. First, 4 negative binomial models which were statistically significant were developed. This was because the over-dispersion coefficients had a value greater than 1.96. Second, the common variables in these models were not adopted. The specific variables by model were analyzed to be traffic volume, conflicting ratio, number of circulatory lane, width of circulatory lane, number of traffic island by access road, number of reduction facility, feature of central island and crosswalk.

• ETRI Journal
• /
• 제32권5호
• /
• pp.827-830
• /
• 2010

For an adaptive cruise control (ACC) stop-and-go system in automotive applications, three radar sensors are needed because two 24 GHz short range radars are used for object detection in an adjacent lane, and one 77 GHz long-range radar is used for object detection in the center lane. In this letter, we propose a single sensor-based 24 GHz radar with a detection capability of up to 150 m and ${\pm}30^{\circ}$ for an ACC stop-and-go system. The developed radar is highly integrated with a high gain patch antenna, four channel receivers with GaAs RF ICs, and back-end processing board with subspace based digital beam forming algorithm.