• Tunnel and Underground Space
• /
• v.27 no.3
• /
• pp.132-145
• /
• 2017

Shock loss was not applied for the tunnel ventilation of road tunnel in the past. However, pressure losses due to the shock loss can be significant in network double-deck road tunnel in which combining and separating road structures exist. For the optimum ventilation design of network double-deck road tunnel, this study conducted 3D CFD numerical analysis for the shock loss at the combining and separating flows. The CFD model was made with the real-scale model that was the standard section of double-deck road tunnel. The shock loss coefficient of various combining and separating angles and road width was obtained and compared to the existing design values. As a result of the comparison, the shock loss coefficient of the $30^{\circ}$ separating flow model was higher and that of the two-lane combining flow model was lower. Since the combining and separating angles and road width can be important for the design of shock loss estimation, it is considered that this study can provide the accurate design factors for the calculation of ventilation system capacity. In addition, this study conducted 3D CFD analysis in order to calculate the shock loss coefficient of both combining and separating flows at flared intersection, and the result was compared with the design values of ASHRAE. The model that was not widened at the intersection showed three times higher at the most, and the other model that was widened at the intersection resulted two times higher shock loss coefficients.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.1-9
• /
• 2007

To decide the number of road lane is very important and related to the 30th design hourly factor in the design of transportation facilities. But, as the quantitative division of road types is difficult, most planner and designer for deciding the 30th design hourly factors have used the fixed values in our country. In this study, we have analyzed the time series property of the design hourly factors in national highways and developed the model capable of estimating the 30th design hourly factors using real data. The presented model is a simple regression model(DHV = K*AADT), which is applied to the division of road lanes(2 or 4 lanes) and the level of AADT(3 levels). As a results, the simple regression model have better performance than the existing method with respect to MAPE and $R^2$. Also, the variations of the 30th design hourly factors are small. The more traffic volume increase, the more the factors decrease. But, the limitation of this study is to use the exiting method estimating the values of the factors, it is subject to study hereafter.

• International Journal of Highway Engineering
• /
• v.16 no.1
• /
• pp.11-19
• /
• 2014

PURPOSES : The purpose of this article is to investigate the predicted life of jointed concrete pavement (JCP) with two variables effecting on axle load spectra (ALS). The first variable is different data acquisition methods whether using high-speed weigh-in-motion (HS-WIM) or not and the other one is spectra distribution due to overweight enforcement on main-lane of expressway using HS-WIM. METHODS : Three sets of ALS had been collected i) ALS provided by Korea Pavement Research Program (KPRP), which had been obtained without using HS-WIM ii) ALS collected by HS-WIM before the enforcement at Kimcheon and Seonsan site iii) ALS collected after the enforcement at the same sites. And all ALS had been classified into twelve vehicle classes and four axle types to compare each other. Among the vehicle classes, class 6, 7, 10 and 12 were selected as the major target for comparing each ALS because these were considered as the primary trucks with a high rate of overweight loading. In order to analyze the performance of JCP based on pavement life, fatigue crack and International Roughness Index (IRI) were predicted using road pavement design program developed by KPRP and each ALS with same annual average daily traffic (AADT) was applied to design slab thickness. RESULTS : Comparison ALS of KPRP with those of HS-WIM shows that the ALS of KPRP has a low percentage of heavy spectra such as 6~9 tonnes for single axle, 18~21 tonnes for tandem axle and 27~30 tonnes for tridem axle than other two ALS of HS-WIM in most vehicle classes and axle types. It means that ALS of KPRP was underestimated. And after the enforcement, percentage of heavy spectra close to 10 tonnes per an axle are lowered than before the enforcement by the effect of overweight enforcement because the spectra are related to overweight regulation. Prediction results of pavement life for each ALS present that the ALS of HS-WIM collected before the enforcement makes the pavement life short more than others. On the other hand, the ALS of KPRP causes the longest life under same thickness of slab. Thus, it is possible that actual performance life of JCP under the traffic like ALS of HS-WIM could be short than predicted life if the pavement was designed based on ALS provided by KPRP. CONCLUSIONS : It is necessary to choose more reliable and practical ALS when designing JCP because ALS can be fairly affected by acquisition methods. In addition, it is important to extend performance life of the pavement in service by controlling traffic load such as overweight enforcement.

• The Korean Journal of Mycology
• /
• v.38 no.1
• /
• pp.34-39
• /
• 2010

We have attempted to verify 30 strains of Hypsizigus marmoreus from various mushroom stocks in Korea using random amplified polymorphic DNA (RAPD) methodology. Chromosomal DNAs of them were extracted and subjected to PCR analyses with 3 random primers. Each PCR produced approximately 30 distinct PCR bands with the size from 200 bp to 3000 bp. A dendrogram was acquired using the unweighted pair-group method with arithmetic average (UPGMA) clustering methodology on the basis of the DNA band pattern. The analysis revealed that 30 strains of H. marmoreus were clustered into two distinct clusters. Cluster 1 contained 3 subgroups while the cluster 2 consisted of rather diverse strains. Interestingly, Hm3-10, a wild strain collected from Deog-Yu mountain, was not included in either clusters, indicative of uniqueness of this strain. We nextly attempted to develop strain-specific DNA markers to verify a specific strain. A unique band in the RAPD gel lane of Hm0-4 was extracted and its sequence was determined. PCR with a primer set from the determined sequence revealed that the primer set gave a 250 bp DNA band only for Hm0-4, indicating that this approach works well for the strain-specific identification of H. marmoreus.

• Journal of Korean Society of Transportation
• /
• v.15 no.4
• /
• pp.73-90
• /
• 1997

The warrants to install traffic signals used in U.S.A. are well specified comparing to those in other countries. Among the eleven warrants of the U.S.A., the Warrant 9, 10, and 11 are especially fit in practice. The warrant relaxed to traffic volumes used presently in Korea have been adopted from the U.S.A. Those may not have been reliable in the traffic situation of Korea. The rules required passing through intersections are not kept well at intersections controlled without signals. The purposes of this study are to test and evaluate the reliability of the Warrant 9 and 11 adopted form U.S.A.n Korean traffic situation and to propose new traffic signal warrants related to traffic volumes fitted in here. The traffic volume warrants are proposed considering the situation of rules not being kept well(current situation) and that of vice versa(ideal situation). The results of this study are following; 1) The total volumes warranted to traffic signals are 1600vph, 1700vph, and 1800vph at 4-legs intersection having 1 by 1 lane, 1 by 2 lanes, and 2 by 2 lanes respectively. The total volumes warranted are 1400vph and 1600vph at 3-legs intersection haying 1 by 2 1anes, and 2 by 2 lanes respectively. 2) Another traffic warrants proposed are transformed from the currant warrants 9 and 11. These warrants are composed of the total volumes and the ratio of the volume of the minor street to that of the major street.

• Journal of Korean Society of Transportation
• /
• v.21 no.4
• /
• pp.133-144
• /
• 2003

The current procedure of estimating accident reduction benefit shows fixed accident rates for each level of roads without considering the various characteristics of roadway geometries, and traffics. In this study, in order to solve the problems mentioned in the above, models were developed considering the characteristics of roadway alignments and traffic characteristics. The developed models can be used to estimate the accident rates on new or improved roads, In this study, only urban highways were included as a beginning stage. First of all. factors influencing accident rates were selected. Those factors such as traffic volumes. number of signalized intersections, the number of connecting roads, number of pedestrian traffic signals, existence of median barrier, and the number of road lane are also selected based upon the obtainability at the planning stage of roads. The relationship between the selected factors and accident rates shows strong correlation statistically. In this study, roads were classified into 4 groups based on number of lanes, level of roads and the existence of median barriers. The regression analysis had been performed for each group with actual data associated with traffic, roads. and accidents. The developed regression models were verified with another data set. In this study, in order to develop the proposed models, only data on a limited area were used. In order to represent whole area of the country with the developed models. the models should be re-analyzed with vast data.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.209-221
• /
• 2009

Travel time estimation under given traffic conditions is important for providing drivers with travel time prediction information. But the present expressway travel time estimation process cannot calculate a reliable travel time. The objective of this study is to estimate the path travel time spent in a through lane between origin tollgates and destination tollgates on an expressway as a prerequisite result to offer reliable prediction information. Useful and abundant toll collection system (TCS) data were used. When estimating the path travel time, the path travel time is estimated combining the link travel time obtained through a preprocessing process. In the case of a lack of TCS data, the TCS travel time for previous intervals is referenced using the linear interpolation method after analyzing the increase pattern for the travel time. When the TCS data are absent over a long-term period, the dynamic travel time using the VDS time space diagram is estimated. The travel time estimated by the model proposed can be validated statistically when compared to the travel time obtained from vehicles traveling the path directly. The results show that the proposed model can be utilized for estimating a reliable travel time for a long-distance path in which there are a variaty of travel times from the same departure time, the intervals are large and the change in the representative travel time is irregular for a short period.

• Journal of Korean Society of Transportation
• /
• v.35 no.3
• /
• pp.234-246
• /
• 2017

The Seoul metropolitan government introduced the bus information systems, bus rapid transit to increase travel speed and punctuality but still suffer from insufficiency. This paper delivers a study verifying the external factors at near the bus stops. The dependent variable was set to the standard deviation of (1) travel time and (2) travel time to and from the bus stop in this study. The independent variables were set to (1) the number of routes, (2) traffic volume by bus type, (3) the number of bus bays, (4) the possibility of passing, (5) the distance to crosswalks and intersections, and (5) the presence of residential road. The results showed that the most significant factors included the link section speed, number of bus bay, distance to crosswalk, and the possibility of passing.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.155-163
• /
• 2012

At present the letter sizes of traffic sign are variously designated as 22 cm through 60 cm, however the basis for determination has not been found so far. Driver's visual acuity for getting a driver licence is required higher than 0.5. In order to interpret the information of traffic signs effectively, the minimum requirement of driver's visual acuity must be applied to determine the letter size of traffic sign. Therefore we reviewed that a driver with visual acuity of 0.5 could read the current letter sizes of traffic sign. In addition, a methodology was developed to determine the letter size of traffic sign satisfied with the driver's visual acuity of 0.5. This study established scenarios that were composed of visual acuity, reaction time, the number of lane and the letter sizes of traffic sign for each scenario were proposed. Current letter size of traffic sign would not be difficult for drivers with minimum visual acuity of 0.5 to recognize the contents or information of traffic signs. The method developed in this research has an advantage that can consider a human factor like driver's visual acuity for the design of traffic signs. There is also a meaning of making a basis for the letter size of traffic sign.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.6
• /
• pp.699-714
• /
• 2022

The objective of this study is to suggest a safe and economical pillar reinforcement method when very near-twin tunnels with a minimum interval of 1 m passes through a soft zone such as weathered soil or weathered rock. A standard cross-sectional view of a two-lane road tunnel was applied to suggest a pillar reinforcement method for the very near-twin tunnels. The thickness of the pillar was 1 m. The ground condition around the tunnel was weathered soil or weathered rock. There were four reinforcement methods for pillar stability evaluation. These were rock bolt reinforcement, pre-stressed steel strand reinforcement, horizontal steel pipe grouting reinforcement, horizontal steel pipe grouting + prestressed steel strand reinforcement. When the ground condition was weathered soil, only the pillar reinforced the horizontal steel pipe grouting + prestressed steel strand did not failed. When the ground condition was weathered rock, there were no failure of the pillar reinforced the horizontal steel pipe grouting or the horizontal steel pipe grouting + prestressed steel strand. It is considered that the horizontal steel pipe grouting reinforcement played a role in increasing the stability of the upper part of the pillar by supporting the upper load applied to the upper part of the pillar.